Best 10 inch Subwoofer – Choose from our Top 15 Selection

Just as it is the case when you want to get an upgrade for your other stereo components on your car, having the best 10 inch subwoofer install demands that you take a lot into account.

What if I told you that I could show you exactly how to get what you want?

In this section, I would like to let you in on a little secret of mine and shed some light on the only key things you should take into account when choosing one. Whether you want the loudest sound or the most accurate sound quality, there’ll be something for you. Whether space, among other things, is a concern, you’ll know what to go for in a short while.

In this section, we’ll first be looking at the buying guide from which you will be able to know what to go for and what to avoid and then move on to the product reviews.

Well, sit back and relax, because I’m bringing in the noise…

Choose from any of our 3 Recommended Best 10 inch subwoofer


Don’t want to go through the hassle of reading all through, have a quick look at our recommended picks.

Product Image

Key Features

  • Sensitivity SPL (1W / 1m) 85 dB
  • Resonant Frequency 39 Hz
  • Polypropylene Cone
  • 2 Inch Aluminum Voice Coil
  • Foam Surround

  • Sensitivity SPL (1W / 1m) 87 dB
  • Resonant Frequency 39 Hz
  • 37 Hz Port Frequency
  • 4.75 Inch Mounting Height
  • 9.13 Inch Mounting Hole Diameter
  • 2 Inch Copper Clad Aluminum Voice Coil
  • 250 Watts RMS
  • 500 Watts Peak Power Rating
  • 10-inch, dual 4-ohm subwoofer
  • Mica injected polypropylene cone

Best 10 inch subwoofer : Ultimate Buying Guide

First of all, you should know that subwoofers are similar to speakers and the only difference is that they are dedicated to only giving us low frequencies. Regardless of the type of music you like, having a quality subwoofer will be able to increase the overall listening experience of your stereo system.

The enclosure types

As far as subs are concerned, one of the most important things just so happens to be the type of enclosure you have around them. Normally, it is referred to as a box which is exactly what it is. What varies, however, are the different types of enclosures you will get in the market.

Well, let’s shed some light on 3 of the main ones.

The sealed enclosures

We’ve all got our different tastes in music and if you’d like that deep bass, then you should go for the sealed enclosures. In some instances, having a smaller sub in a sealed enclosure will give you a deeper bass as compared to the large subs in open enclosures. Think of the sealed enclosures as the type of enclosure that delivers a tight and accurate bass that.

You are able to get a crispy and accurate bass from a sealed enclosure since the sealed air in the sealed enclosure acts like a shock absorber hence the forward and backward motion of the sub is modulated. The end result of this modulation is having all the notes being produced evenly.

The ported

If you’d like a decent bass quality but aren’t too much into the deep bass, then getting the ported enclosure is the best way to go.

What you get from these subs is a louder than average sound. When it comes to the ported enclosures, the boomy bass has got more punch as well as reverberance in each of its beats. The best part about this sound is that you attain it without using any processor or equalizer.

This is what’s behind the sound…

With the port on the sub, the cone gets to have a greater freedom of motion. What the port simply does is redirect sound from behind the cone and then adds it up to the sound that’s coming from the front of the cone hence making the bass louder.

This simply increases efficiency and will let you use a smaller amplifier as compared to that you’d use if the same set up was a sealed box.

Another added advantage you get from a ported box over a sealed one is that the airflow keeps the sub cool at all times hence it lasts longer

What about power, impedance, frequency, and sensitivity?

If you have in mind the type of sound you’d like to listen to, here are some other major considerations that should not be overlooked whatsoever.

The power handling.

One thing that’s for sure is that for anyone who wants a system that delivers a really nice boom, the only way to go is ensuring that it gets the right amount of power.

One mistake that most people do is paying attention to the peak rating rather than the RMS rating. The reason as to why the RMS is more important than the peak is that the RMS is a measure of the continuous power handling of the subs.

Ensure that you match the subs to the RMS and not the peak. Doing otherwise will simply result in you getting a distorted sound or even worse, damaging the subs completely.

The sensitivity levels.

Sensitivity is inversely proportional to the power. A sub with a high sensitivity needs less power to offer similar sound to a sub with low sensitivity and a higher power supply.

What about the frequency range?

This simply gives you some knowledge of the range of which the subwoofer can be able to play most effectively. When it comes to the frequency range, no matter how large it is, you should always pay attention to the low end of the scale rather than the high end.

Something else you should take into consideration when it comes to frequency is the type of enclosure within which the subwoofer is.

The impedance rating.

So as to get the optimal performance from your sub, you should also consider matching the impedance. Impedance is expressed in ohms and refers to the electrical resistance of the sub. Depending on how the subwoofer is wired, the complexity of the impedance rating varies.

best 10 inch subwoofer Only Choose from 15 of our top picks of 2019

Best 10 inch Subwoofer

Having had a look at the key things to take into account before you make your selection, let’s now have a look at 15 of the best.

1. Planet Audio AC8D 1200 Watt, 8 Inch, Dual 4 Ohm Voice Coil Car Subwoofer

Starting us off on our list is the Planet Audio AC8D. As far as getting yourself a budget sub with decent qualities, this might just be one of the best you could get in the market.

Let’s see what it packs under the hood…

The design- to give you an awesome sound quality and at the same time deliver a comfortable and loud enough bass quality, the woofer comes with a polypropene cone. For the surround, it boasts a foam surround which gives it enough room for movement and is durable as well.

As for the sensitivity and frequency, the Planet Audio AC8D has got an 85dB sensitivity which delivers a loud sound at low power. As for the resonant frequency, it comes with 39 Hz which delivers a variety of tunes at high quality.

Power handling: with a 600W RMS, it surely will deliver loud and quality sound with zero distortions. The 1200W peak voltage, on the other hand, gives room for momentary defiance of the RMS power.


  • With the 600W RMS power handling, the sub delivers a loud and decent sound quality without any distortions.
  • The polypropene cone is both durable and conveniently delivers a decent bass
  • The sensitivity gives a good quality sound at a low power rating.


  • Observe the power rating, otherwise, they may give in easily.

Frequently asked questions

Q: how many RMS watts doe sit handle?

A: it handles 600W RMS

Q: does it come with one or 2 speakers?

A: Unless specified, it comes with 2

Q: What size are the terminals? What wire size can I use?

A: these are the old school solder terminals hence the wire is your choice.

2. Planet Audio AC10D 1500 Watt, 10 Inch, Dual 4 Ohm Voice Coil Car Subwoofer

Above all else, the most important thing when it comes to selecting a subwoofer is the nature of the sound it delivers. Taking this into account, we present to you the Planet Audio AC10D.

Starting with the power handling, this 10 inch sub can handle a maximum of 1500W. This gives momentary allowances for exceeding the recommended RMS power rating. Speaking of the RMS, It is an outstanding 750W- with this, you’ll play quite a number of tunes comfortably and at a high volume.

For durability and the delivery of the best sound, the cone is polypropene which means that you also get to have one of the best bass qualities you could get from a budget subwoofer.

The foam surround on the other hand functions to not only functions to give the sub enough room for movement but it is also durable enough to ensure that you get the best quality sound for long.


  • Poly injection cone- delivers a decent sound quality and an awesome bass.
  • The 87dB sensitivity gives a loud and comfortable sound even at low power.
  • Works effectively both in a sealed and ported enclosure.


  • Don’t play too close to the RMS or it may give in.

Frequently asked questions

Q: would a 1200W amp handle it?

A: Yes, just turn the amp up all the way since the RMS is 750 watts.

Q: does it come in a pair?

A: Yes, it does

Q: does it have dual voice coil?

A: yes, it does.

3. Rockford Fosgate R2D4-10 Prime R2 DVC

All things considered, there’s nothing as awesome as getting the best upgrade for your current car stereo system. that being said, let’s take a look at what the Rockford Fosgate has in store for us.

If you are on a budget and are all about performance, this might just be what you’re looking for. Starting with the cone, it boasts a mica injected polypropylene cone. Which is able to give both a sensitive yet at the same time stiff woofer cone.

As for the surround, it’s poly-foam. Though some prefer rubber, foam is more flexible hence its performance is twice as good.

The power rating, on the other hand, is ideal for delivering the best sound regardless of the music genre you’ll be listening to. With 250 watts RMS and 500 watts of peak voltage, you’ve definitely got more than enough power to play whichever tunes you like and at a comfortable volume level.

As for the cone, it is the Kevlar fiber reinforced paper cone. In its class, this just so happens to be the best cone construction since it is strong, lightweight and rigid.


  • Mica injected polypropene cone for utmost durability and a decent audio output.
  • The power rating allows you to play different tunes and at a high volume without the sub giving in to damage.
  • For added durability, the cone is Kevlar fiber reinforced.


  • Always observe the power rating, otherwise, they may heat up and get damaged.

Frequently asked questions

Q: is an 800-watt amp okay with these?

A: yes, they’ll work quite well.

Q: I have a 1600-watt amp, can 3 of these subs handle it?

A: yes, this combination will be effective.

Q: what is the recommended box space for one of these subs?

A: Based on the manufacturer, the recommended space is 0.59 cubic feet

4. BOSS Audio CXX10 800 Watt, 10 Inch, Single 4 Ohm Voice Coil Car Subwoofer

Truth be told, getting the best 10 inch subwoofer is one of the biggest steps you can take to upgrade your car’s stereo system. What’s even more interesting is that the BOSS Audio CXX10 might just be able to give you what you exactly need.

Let’s have a look at what it’s got for us…

Starting with the sensitivity and resonance, the BOSS Audio CXX10 boasts a sensitivity of 87dB. Though most people don’t pay attention to the sensitivity levels, this one will allow you to go loud and at a small amount of power. As for the resonance frequency, it’s got an outstanding 36Hz which can be able to deliver an awesome bass and treble as well.

As for the design, it comes with a polypropene cone. As it turns out, this is just about one of the best you could get in this price range since it is both durable and sensitive.

The surround, on the other hand, is rubber, though not the most flexible, it’s flexible enough and in addition to this, you won’t have to be worried about the high summer temperatures. It is tolerant to extreme temperatures and moisture.


  • The 400W RMS is enough to go loud without damaging the subs.
  • The rubber surround is durable and flexible as well.
  • The polyurethane cone allows for a great sound and is durable as well.


  • Keep the RMS lower than the recommended, otherwise, you may damage it.

Frequently asked questions

Q: how many speakers do I get out of the box?

A: one

Q: what is the frequency rating?

A: 20Hz to 200Hz

Q: what gauge wire does this sub accept?

A: the 14-gauge wire.

The next-generation 3 series MkII powered studio monitors makes legendary JBL performance available to every studio. With the revolutionary JBL Image Control Waveguide and refined transducers, the 305P MkII offers stunning detail, precise imaging, a wide sweet spot, and impressive dynamic range that enhances the mix capabilities of any modern workspace. Sporting a sleek, modern design and leveraging patented technologies derived from the JBL 7 Series and M2 Master Reference Monitors, the 305P MkII delivers outstanding performance and an enjoyable mix experience at an accessible price.


  • 82 watts of total power from dual integrated, custom Class-D amplifiers
  • Maximum continuous/peak SPL: 94dB/108dBSleek, modern design provides a visual upgrade to any studio
  • Maximum continuous/peak SPL: 94dB/108dBSleek, modern design provides a visual upgrade to any studio


  • The RMS may not be enough for you.

Frequently asked questions

Q: does it come with the tube or is it the speaker alone?

A: It’s just the speaker

Q: can it be used in an under-seat box?

A: yes, it can be used in an under-seat box

Q: can it fit in a shallow mounting box?

A: yes, it’s exactly what it was meant to do

6. Pioneer TS-A250D4 10" Dual 4 ohms Voice Coil Subwoofer

Pioneer TS-A250D4 10" Dual 4 ohms Voice Coil Sub-woofer. Frequency Range = 20 Hertz to 2 kilohertz. Maximum Peak Power Handling = 1300 Watts. Continuous Power Handling (RMS) = 400 Watts.


  • An outstanding power handling for the best sound quality.
  • IMPP composite cone is durable and sensitive for the best sound.
  • The surround is Dual Layer Fiber Reinforced Elastic Polymer-flexible and durable


  • Hooking them up may be a problem if you’re doing it for the first time

Frequently asked questions

Q: what is the air space needed?

A:Sealed box .65-1.25 cubic feet should work best

Q:What Is the mounting depth for the speaker?

A: 5.5 inches should do.

Q: what is the RMS?

A: 350 watts.

7. Pyle Car Subwoofer Audio Speaker - 8in Non-Pressed Paper Cone, Black Steel Basket, Dual Voice Coil 4 Ohm Impedance

  • 800 WATT POWER: This 8in car subwoofer has a power of 400 Watt RMS to 800 Watt peak that will produce high sound resonance. It also has a spring loaded push down speaker terminals that will maximize sound qualityUNMATCHED PERFORMANCE: Built with 40 oz. magnet that will enhance car stereo or radio by producing a powerful audio and unmatched performance. It comes with a sensitivity or SPL of 89dB to resonate perfect clarity
  • DUAL VOICE COIL: The speaker subwoofer comes with a dual 4 Ohm impedance that can be wired as 4 or 8 Ohm. The 1.5" 4-layer voice coil can resist corrosion and ensure a longer life span
  • TREATED FOAM SURROUND: Made entirely of specially treated foam surround for durability. Designed with this non-fatiguing suspension to keep equipment safe. It is a clean-cut car subwoofer that boasts a non-pressed paper cone and black steel basket
  • 3.7” MOUNTING DEPTH: Easy to install with its 3.7” mounting depth and fits most audio system for cars, boats or RVs. The overall diameter is 8.2 inch. Included are the necessary cables, installation template and manual
  • Pros

    • Polypropylene cone for utmost durability and the best sound quality.
    • Outstanding power handling- 750W RMS and 1500W RMS for each sub.
    • With the butyl rubber surround, the flexibility and durability is not compromised.


    • Exceeding the recommended RMS would easily damage the subs.

    Frequently asked questions

    Q: Can they handle 2 ohms?

    A: No, they can’t

    Q: Do I get 2 subs out of the box?

    A:yes, the subs are 2 out of the box.

    Q: why are there 2 places for the speaker wire?

    A: this is because it is a dual voice coil.

    8. Kicker 43C104 Comp Car Audio Subwoofer

    As far as getting the best 10 inch subwoofer is concerned, there’s definitely more than meets the eye and quite a number of things you should take into account before making your selection. That being said, let’s see what the Kicker 43C104 packs under the hood.

    Starting with the power handling and also one of the most important things on a sub, the Kicker 43C104 has got an RMS of 150 watts and a peak power of 300 watts. As it turns out, this will come in handy quite well since not only will the RMS allow you to comfortably listen to your music at an ideal quality but the Peak permits momentary surpassing of the RMS for an even better experience.

    As for sensitivity, it comes with 86.2 dB which just so happens to be the best considering the power rating of the subs.

    As for the frequency response, the 30-500Hz range is just the best you could get from a subwoofer in its class since with this, you’ll be able to have an awesome bass and treble among other tunes. In addition to this, the mids, highs, and lows will also be quite good.


    • 2dB turns out to be an ideal sensitivity in delivering good sound quality.
    • The power handling is enough to allow an awesome sound with no distortions.
    • The frequency range allows the delivery of the best bass and treble as well.


    • Always pay attention to the RMS; exceeding it will damage the sub or distort the sound.

    Frequently asked questions

    Q: Is it okay to use a 1.3 cubic feet ported box?

    A: yes, this is totally okay

    Q: is it okay for me to use a 1000w amp or will it overpower the sub?

    A: yes, the 1000w amp is okay to use.

    Q: What is the RMS rating?

    A: the RMS is 150 watts and the peak is 300 watts.

    9. Powerbass S-1004 10-Inch Single 4 Ohm Subwoofer 550W Max

    We’re already past halfway on our top 15 list. coming 9th on our list is the Powerbass S-1004. If you’re looking for the best mid-range upgrade for your stereo system, then this might definitely just be it.

    Starting with the design, it comes with an oversized motor structure that has got a high-intensity ferrite magnet so as to give you an added advantage when it comes to power handling.

    As for the foam, it boasts the large roll foam surrounds. As it turns out, these are one of the best since they allow for a free movement of the cone which is an equivalent of a loud bass- definitely guaranteed to give you an outstanding experience as compared to others in its class.

    As for the cone, it’s got the 4-layer Black Paper/Wool cone. This provides a smooth and natural bass reproduction for the best music experience.


    • High-intensity ferrite magnet for the best power handling.
    • Large roll surround foams for free cone movement and a loud bass.
    • 4-layer Black Paper/Wool cone for smooth bass reproduction.


    • Seems to be more inclined towards delivering an awesome bass.

    Frequently asked questions

    Q: Are they louder than the kicker comps 12s?

    A: yes, they are.

    Q:Are they big enough to put in a dual ported box?

    A:  yes, they are.

    Q: what is the best amp to run 2 of these?

    A: a 1000-watt mono block amp would do.

    10. Polk MM1 Series 8" 900 Watt 4 Ohm Single Voice Coil Car Audio Marine Subwoofer

    By land or by sea, there's no weapon in your audio arsenal more powerful and accurate than the Polk MM1 8 Inch 900 Watt SVC Marine Subwoofer. Engineered for precision with Dynamic Balance technology for richer, cleaner, more full range sound, this subwoofer features 300 watts of RMS power and frequency response of 30 Hz to 200 kHz. It also boasts 85 dB sensitivity and a mounting depth of just 4.13 inches. Eliminate unwanted distortion, resonant frequencies, and the threat of moisture with this IP56 marine rated subwoofer today.


    • 270 watts RMS and 540 watts peak power for continuously enjoyable music experience.
    • Marine certified hence durability is not compromised.
    • The polypropylene cone with rigid ABS dust cap gives a stiffer cone for better mechanical stability.


    • Despite the durability, the bass is a little wanting

    Frequently asked questions

    Q: what is the mounting depth?

    A: you’ll need about 7 to 7 ½ inches

    Q: does It come with the grille?

    A: no, you need to get the grille separately

    Q: Can this be used in a marine open-air application?

    A: yes, it can, it is a marine grade sub

    11. Alpine SWS10D4 / SWS-10D4 / SWS-10D4 Type-S 10 Car Subwoofer

    Alpine SWS10D4 / SWS-10D4 / SWS-10D4 Type-S 10 Car SubwooferAlpine SWS10D4 / SWS-10D4 / SWS-10D4 Type-S 10 Car Subwoofer

    If you’d like to go a notch higher and give your car its deserved high-end stereo system upgrade, then you should consider having a look at these Alpine subwoofers.

    Here’s what you get out of the box…

    Power handling: to ensure that you get to listen to your favorite music genres without any sound distortions or damaging the subwoofers at all, you get an outstanding 500W RMS power output and in addition to this, there is a 1,500W of peak power as well.

    To give you multiple connection options, the sub comes with dual 4-ohm voice coils that are built like Type-R. these are massive and have got a high strength steel frame.

    So as to give you the best bass quality, they come with the high-grade Strontium Ferrite Magnets which are reputed for delivering more bass in less space.

    So as to keep things cool, you have the patented Alpine Airflow Management System.


    • High-grade strontium ferrite magnets to deliver more bass in less space.
    • The HAMRS Santoprene rubber surround makes this the best 10 inch subwoofer when it comes to flexibility and durability.
    • The design allows it to keep cool for the best performance.


    • At certain notes the sound is really high pitched which may be uncomfortable to some.

    Frequently asked questions

    Q: can it be converted to 2-ohm impedance?

    A: Yes, there are 4 connections in it to bridge them.

    Q: what is the best amp for this sub?

    A:alpine 350 should do but it depends on how many subs you are running. This works on one or two subs.

    Q: Would an 8 or 4-gauge wiring be best for this sub matched with the mrv 500?

    A: 4-gauge wire should do.

    12. Pair of KICKER 10C104 Comp 10″ 600 Watt 4 Ohm Car Subwoofers

    KICKER 2 New 10C104 Comp 10 inc 600 Watt 4 Ohm Car Subwoofers KICKER 2 New 10C104 Comp 10 inc 600 Watt 4 Ohm Car Subwoofers

    As far as getting an upgrade is concerned, then this pair from KICKER may just be the best 10 inch subwoofer you could get the biggest bang for your money. Well, let’s see what it packs under the hood.

    The design:

    As far as design quality goes, the one you get from these just so happen to have the best. First of all, to keep it as cool as possible, it has got a strong steel basket with a coil-cooling perimeter venting. This means that you won’t have to worry about overheating.

    The super-rigid and injection molded cone with a 360-degree back bracing deliver the best sound quality. The vented pole piece on the other hand functions to dissipate heat when need be.

    As for the surround, it is ribbed so as to deliver utmost strength at a high excursion.

    The best thing about the subs is that the comp is designed in such a way that it will be able to perform best in both sealed and open enclosures.


    • Ribbed surround so as to give ultimate strength at high excursion.
    • The strong steel basket is durable and also has coil-cooling perimeter venting.
    • To facilitate heat dissipation, the pole piece is vented


    • It’s a pair of 300W not 600W as advertised

    Frequently asked questions

    Q: does it come with a warranty?

    A: No, it does not come with a warranty.

    Q: how does it compare with 12-inch comps?

    A: the 12s are louder but the 10s hit harder.

    Q: how many watts does it receive?

    A: 600W for both and 300W max for each

    13. Kicker KMF10 10-inch (25cm) Weather-Proof Subwoofer for Freeair Applications, 4-Ohm

    45KMF104 10" 4-ohm Free-Air Marine Subwoofer Marine Material Completely weatherproof these 10 and 12-inch Marine Subs are real-world tested for salt/fog and UV exposure meeting or exceeding ASTM standards. Bass That Lasts A completely sealed motor structure and locking/sealed terminal cover make it splash-proof for long life while a tough Santoprene surround and marine grade cone pump out the bass no matter how long or loud you want the party to be. Light Show Optional LED grilles (sold separately) for KM Subs come with seven selectable LED colors to match your boats theme! Add the KMLC LED controller (sold separately) for 20 total colors and 19 different lighting modes to make it even more fun! Bump the Boat Packed with features and made for marine KICKER gives you the deep loud bass your boat needs with the KMF series of subs. Features: Four-Ohm Voice Coil Injection-Molded Polypropylene Cone Co-molded Santoprene Surround UniPlate Back Plate And Pole Piece Thick Tinsel Leads Large Ceramic Magnet Rear Gasketing Included Polymer Basket Resists Corrosion Protective Terminal Cap Stainless Mounting Hardware Included Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure (ASTM B117 200 hr. Salt Fog Test) (ASTM G154 400 hr. Accelerated UV Test) *The KM 10-inch Subwoofer works best with a sealed or ported enclosure and 300 watts of recommended power. See below for more details. What's in the Box: One 45KMF104 subwoofer Mounting hardware Owners manual Specifications: Woofer (in mm): 10 25 Impedance (OHMS): 4 SVC Peak Power Handling (Watts): 500 Continuous Power Handling (Watts RMS): 250 Sealed Enclosure Volume Min-Max (ft L): N/A Vented Enclosure Volume Min-Max (ft L): N/A Frequency Response (Hz): 30-500 Mounting Depth (in cm): 5 12.7 Hole Diameter (in cm): 9-3/16 23.2 Outer Diameter (in cm): 10-11/16 27.1


    • 6 dB sensitivity gives a loud and clear sound even at low power.
    • With the injection-molded polypropylene cone, you get both durability and an awesome sound quality.
    • The power handling renders them ideal for listening to different music genres comfortably without the subs giving in to damage.


    • Though they are accurate, they aren’t very loud

    Frequently asked questions

    Q: What is the RMS rating?

    A: 350W RMS

    Q: Can this be able to fit on my 10 bazooka tube?

    A: yes, and it is a great subwoofer

    Q: what amps are recommended for running two of these?

    A: audio pipe 1000 watts.

    14. New ROCKFORD FOSGATE R2D2-10

    As far as far as getting the best 10 inch subwoofer Is concerned, the New ROCKFORD FOSGATE R2D2-10 might just be what you’re after.

    First of all, it is worth mentioning that it has got a Stamp-Cast basket with a spider venting. Not only is this durable, but it also ensures that there is ultimate air circulation hence you won’t have to worry about damage by heat whatsoever.

    The cone, on the other hand, is the Mica-injected polypropylene cone. With the addition of the mineral Mica to polypropylene, the durability is made even better and the best part about this is that the sound quality is not compromised whatsoever.

    Owing to the fact that it is a dual voice coil sub, you have got multiple installation options which means you can set it up to produce just the quality of sound and volume you desire.

    Outstanding power handling:

    The RMS of the setup is 250 watts for each of the subs and 500 for the combined pair. As for the peak power handling, it is 500 watts for each sub and 1000 watts for the combined pair.


    • Dual voice coil for installation flexibility.
    • Mia-injected polypropylene cone to deliver quality sound and maintain utmost durability.
    • The power handling allows you to listen to your favorite music without any sound distortions


    • Surpassing the RMS will damage the subs. If you want a louder performance, consider using an amplifier.

    Frequently asked questions

    Q: what is the mounting depth?

    A: this is slightly over 5 inches

    Q: how should I connect it?

    A: either parallel or series regarding your preferred set up

    Q: is the price for both the subs?

    A: yes, it is for the pair.

    15. Planet Audio AC8D 8 Inch Car Subwoofer - 1200 Watts Maximum Power, Dual 4 Ohm Voice Coil, Sold Individually

    A new subwoofer must go through a short but important process of 'break-in' before it is run under harsh conditions. This will ensure the performance as it has been designed to. The process involves subjecting the subwoofer to no more than low-to-medium volume levels for a number of hours in the enclosure. This will loosen the suspension to prevent the voice coil from overheating. Over-driving the woofer before it has been broken-in, will result in premature failure and poor performance.


    • Dual 4-ohm voice coil for multiple installation options
    • 1 watt/1-meter efficiency at 96dB hence the sound quality is definitely the best.
    • An outstanding RMS and peak power handling for the best performance.


    • Not efficient for use in a shallow box.

    Frequently asked questions

    Q: is the price for all the four?

    A: Yes, it’s for all the 4

    Q: what box should I buy for the subs?

    A: 2 vented boxes should work fine

    Q:Can I use a 5,000-watt amp?

    A: it is recommended that you use the planet audio anarchy so yes you can only if you’re using a true 5000. Just ensure you tune it down a bit.

    Final Verdict

    Truth be told, there’s more to choosing a sub than meets the eye. Unlike what most people tend to think or assume, it is neither about the brand name nor is it about how much the sub costs. What you should consider however is whether or not the sub will deliver the sound quality you like.

    With the knowledge of how to choose the best in mind and 15 of the best simply a click away, I’ve done my part and it’s now up to you to do yours. Simply take your time to know what you really want then go ahead and make your selection- you deserve the best.


    Click Here to Leave a Comment Below 0 comments