Best 12 inch Subwoofers- durability & Performance all in one

How far are you willing to go to get your car to its best possible state as far as the audio components are concerned? It's quite sad that most people will choose to simply settle for the factory installed sound system whereas they could tune up their car to a whole new level.

One of the areas where most people go wrong as they strive to get good music is one the subwoofers. What if I told you that by the time we’re done, you’ll have 10 of the best 12inch subwoofers at your disposal? Yes, that’s right, in this section, we’ll be taking a look at some of the best subwoofers of 2018.

Each of these is guaranteed to give you a kick for your buck and with our buying guide on how to choose the best subwoofer, you’ll have utmost knowledge of what to look into.

Enough with the introductions already. How about we move on to the main agenda, let’s get started with our review, shall we?

You could have a look at our top 3 picks rather than having to read all through our review. I have to say, these three are literally the best of the best you could get in the market.

Product Image

Key Features

Pioneer TS-W3003D4

  • check
    Pioneer 12" woofer that needs .85 to 1.75 cuft to work
  • check
    2000w 12" woofer
  • check
    Dual 4 ff Voice Coils

Rockford Fosgate P2D2

  • check
    Dual linear spider with embedded 16 AWG tinsel leads
  • check
    Custom 10-AWG nickel plated push terminals
  • check
    12-inch, dual 2-ohm subwoofer with 800 watts

Pioneer TSW126M 12" Subwoofer with IMPP Cone

  • check
    1300 watts Max power
  • check
    New Voice Coil Cooling System (VCCS)
  • check
    IMPP cone produces tight and accurate bass

Read Our Expert Buying Guide : 

How To Buy Best Subwoofers Online

Cleck Here

Top 10 Best 12 inch Subwoofers 

Planet Audio AC12D 1800 Watt

Planet Audio AC12D Car Subwoofer - 1800 Watts Maximum Power, 12 InchPlanet Audio AC12D Car Subwoofer - 1800 Watts Maximum Power, 12 Inch

Performance = 80/100

Durability = 80/100

User-friendly = 80/100

It’s got a customizable trim ring for a perfect fit and both the cone; the voice coil and the surround are built to last. The impedance, sensitivity and power rating altogether will give a quality sound.

Kicking off our review is the Planet Audio AC12D. if you’re about getting a kick for your buck, then this subwoofer may just be what you’re looking for. It’s got a little bit of everything to offer.

A polypropylene cone and foam surround.

For the construction, you’ll be getting a polypropylene cone that’s one of the most reputed when it comes to the manufacture of car speakers and subwoofers.Due to its light weight and rigidity, it is able to give out quite a high-quality bass.

With foam for the surround, there will be outstanding flexibility and in addition to this, foam I renowned for being able to maintain its original form over a long span of time.

88dB sensitivity.

When it comes to getting the loudest sound and using up less power, the 88dB sensitivity ought to do this perfectly. Despite the subwoofer having quite a high-power rating, the sensitivity allows you to use just enough for the production of a loud and clear bass.

4-ohm impedance.

For maximum power utilization, this sub comes with a 4-ohm impedance which. In addition to having a low impedance rating, the resonating frequency is as low as 32Hz. With the two of these, working hand in hand you’ll definitely be getting a loud and low bass.


  • check
    With the low resonating frequency, the bass will be quite low.
  • check
    Quality construction for both a quality sound and utmost durability.
  • check
    A high sensitivity rating for a loud and clear bass.


  • check
    Go slow on the power; anything above the recommended rating could blow the speaker


Q: does it come in a pair?

A: no, you’ll be getting just one of these

Q:does it come with dual voice coils?

A: yes, it does come with dual voice coils

Q: which enclosure should I use for this subwoofer?

A: depending on what you like, it would do well with any enclosure

Car Subwoofer | BOSS Audio CXX12 1000 Watt, 12 Inch, 4 Ohm Voice Coil

BOSS Audio Systems CXX12 Car Subwoofer - 1000 Watts Maximum Power, 12 InchBOSS Audio Systems CXX12 Car Subwoofer - 1000 Watts Maximum Power, 12 Inch

Build quality = 80/100

The fit = 60/100

Performance = 80/100

The sub can take a large amount of power and more so, the cone and surround build quality is outstanding but on the downside, it’s quite large and could prove difficult to have in place.

I’ve got to say, this subwoofer is not just about the size, it’s got a lot more to offer than other subs in its class will even get close to. Let’s see whether or not it’s worth every penny, shall we?

32Hz resonating frequency.

It’s all about having a loud and low bass. By having the resonating frequency as low as 32 Hz, you’ll definitely be enjoying this.

Something else that’s worth pointing out is that the sensitivity is an outstanding 85dB. Even though it’s not the highest you could get from a subwoofer, it’s enough to get the volume going loud at low power.

Rubber surround

For the surround, you'll be getting both a durable and high-performing butyl rubber surround. This just so happens to be one of the most flexible you could get on both a speaker or a subwoofer.

Polypropylene Cone

With polypropylene for the cone, the bass will definitely be clear and simultaneously loud enough. All this is due to the rigid and lightweight nature of polypropylene. In addition to delivering an outstanding bass, it is also quite durable.

An aluminum voice coil.

For the sake of both performance and durability, the voice coil included in the BOSS Audio CXX12 is a lightweight and soft hence qualifies as one of the ideal materials to use in a car subwoofer.


  • check
    4-ohm voice coil for optimal power usage
  • check
    A high 85dB sensitivity for a loud and clear bass.
  • check
    Durable construction for both the cone and the surround


  • check
    It may easily blow if you exceed the recommended power rating


Q: how much does it weigh?

A: the shipping weight is around 5 pounds

Q: can it be able to work at 1 ohm?

A:yes, it can

Q:can it be run without a box?

A:yes it can

Rockford Fosgate P2D2-12 Punch P2

Rockford Fosgate P2D2-12 Punch P2 DVC 2-Ohm 12-InchRockford Fosgate P2D2-12 Punch P2 DVC 2-Ohm 12-Inch

Quality = 80/100

Durability = 80/100

The fit = 80/100

The flex fit basket will offer a perfect fit. The cone and the surround are above average and the voice coil is designed to withstand high temperatures.

Besides having an outstanding RMS of 400 watts and a peak power voltage of 800 watts both of which will allow you to get a punchy bass, let’s take a look at what more this sub has to offer.

Dual 2-ohm impedance.

Since it’s all about getting the bass as low and loud as possible, you’ll be having a dual 2-ohm impedance on the Rockford Fosgate P2D2. The 2 ohms alone should be enough for you to channel as much power as possible.

In addition to this, the subwoofer has got a dual voice coil that enables you to wire up the sub as you desire for the production of a high-quality bass.

A high temp voice coil.

Since it’s got such a high-power rating, the Rockford Fosgate P2D2 has been constructed with a high-temperature voice coil within it.

This makes it possible for it to take in a low of power without blowing up the subwoofer

Kevlar fiber reinforced paper cone.

Being one of the things that determine how good a sound quality you'll be getting, it's important to pay really close attention to the cone.

Though it’s just a paper cone, it is reinforced with Kevlar fiber which greatly boosts the durability and at the same time does not compromise the sound quality you will have.

StampCast basket with an integrated spider venting

Besides just having a high temp voice coil, this subwoofer will come with an integrated spider venting which keeps the motor cool.

There is also a StampedCast basked that adds on to the strength for holding everything in place


  • check
    Has got a poly-foam surround- both durable and flexible
  • check
    A high temp voice coil that’s ensures the bass is loud and keeps the sub up and running simultaneously.
  • check
    Flex fit basket for a perfect fit when mounted.


  • check
    Supply the wrong amount of power and that’s it, you may have to get a new one


Q: how good is the bass on this generally?

A: you’ll be getting a super crisp and clear bass

Q: can they be able to handle a 3000W class D monoblock amplifier?

A:yes, they can handle it.

Q: which hits harder between 4 ohms and 2 ohms?

A: 2 ohms will definitely hit harder.

Pioneer TS-W3003D4 Champion Series Pro Subwoofer

Pioneer TS-A300D4 12 Inch 1500 Watts Max Power Dual 4-Ohm Voice Coil A Series Car Audio Stereo SubwooferPioneer TS-A300D4 12 Inch 1500 Watts Max Power Dual 4-Ohm Voice Coil A Series Car Audio Stereo Subwoofer

User-friendly = 60/100

Performance = 90/100

Durability = 80/100

It’s built to take quite a lot of power and with an IMPP cone. It's bound to last and simultaneously give a good sound. If you'd like to have it in an enclosure, however, you should go for a large one.

Pioneer is one of the brands that has been around longest as far as car subwoofers are concerned. We, therefore cannot expect anything less than an outstanding performance from the Pioneer TS-W3003D4. Let’s see what it’s got in store for us.

Has got a dual 4-ohm ff voice coil

One of the features that dictate how good the bass will be is the voice coil. Even with the 4-ohm impedance alone, the Pioneer TS-W3003D4 should be able to pump quite a substantial amount of bass.

In this case, however, you'll be getting a dual 4-ohm voice coil which can be wired up differently in order to have even a lower impedance.

Power handling

Yet another feature that greatly contributes to the bass quality is the power handling capability. By having an RMS of 600 watts and a peak power rating of an outstanding 2000 watts, you’ll definitely be getting a window-rattling bass which is something only a few people dream of.

Product dimensions.

For the measurements, this subwoofers measures 12 x 12 x 6.9 inches. Since it packs a low of power, it also does come along with a lot of weight which is 14.4 pounds.

For the fit, you should ensure that you get this right before making your purchase.


  • check
    A dual voice coil for maximum power utilization.
  • check
    4-ohm impedance ensures that you get to use just the right amount of power for an outstanding bass production.
  • check
    Has quite an ideal power rating- 600-watt RMS and 2000 watts for the peak


  • check
    To have the perfect fit, ensure you take your measurements carefully and compare them against this subwoofer’s dimensions


Q: what is the mounting depth for this subwoofer?

A: 6.9 inches

Q: how’s the bass on this

A:it’s basically one of the best 12 inch subwoofers; handles the lows very well and can also handle the highs

Q:doe the package has one subwoofer or two?

A: you’ll be getting only one

2) NEW Kenwood KFC-W3016PS 12" 4000 WATT Car Audio Subwoofers

2) NEW Kenwood KFC-W3016PS 12 inc4000 WATT Car Audio Subwoofers Subs Woofers 4 Ohm2) NEW Kenwood KFC-W3016PS 12 inc4000 WATT Car Audio Subwoofers Subs Woofers 4 Ohm

Performance = 90/100

User-friendly = 60/100

Durability = 70/100

Though it may take some time for it to break in, it will handle more power than most and the with thermal durability it’s definitely built to last.

We’re already nearly halfway done with our review and we’re doing good so far. Coming up 5th in our best 12 inch subwoofers review is the 2) NEW Kenwood KFC-W3016PS. One of the most outstanding things about this product is that you'll be getting a pair which is clearly not a deal you'd stumble upon every day.

Here’s all you’ll be getting from it.

Low-frequency output

An outstanding bass is all about getting a low frequency. In order to ensure that this is possible for each sub in this pair, you'll be having an increased cone area and at the same time, the cutout diameter is not altered.

This is a design unlike any other you’ll be getting on a subwoofer hence you get to enjoy every dime you spend on the pair.

Thermal durability

Enjoying the loud and low bass that this pair delivers is what you’ll want, right? So as to ensure they don’t blow when powered up or that you won’t have to put up with a distorted sound, the pair has been constructed with a thermal efficient system.

This also makes it possible for you to get a smooth and strong bass.

4-ohm impedance

For the impedance, you’ll be getting 4 ohms from each of these. The rule of thumb when it comes to the impedance is that the lower you have it, the better off you are since the subwoofer will be able to utilize the power that’s supplied to it to the maximum and give out an outstanding bass.


  • check
    4-ohm impedance for maximum power utilization
  • check
    Has got a low-frequency output for the best bass quality
  • check
    Its design allows it to keep cool at all times


  • check
    Though they work well without an enclosure, they’d reach their full potential with a ported enclosure


Frequently asked questions

Q: can I reverse these subwoofers?

A: yes you can reverse mount these subwoofers and the same goes for any subwoofer in the market

Q: which enclosure would work best with these subs?

A:a ported enclosure should perform better

Q: are they shallow?

A: yes, they are

Pioneer TSW126M 12" Subwoofer with IMPP Cone

Pioneer TSW126M 12 inc Subwoofer with IMPP ConePioneer TSW126M 12 inc Subwoofer with IMPP Cone

Durability = 80/100

Power handling = 70/100

Performance = 80/100

Though it’s not the highest, the 350-watt RMS should give a good bass. The coil is designed to last and the same goes for the cone as well which will deliver a tight and accurate bass

We’re already halfway done but we still have got more subwoofers to look at. Let’s take a look at what the Pioneer TSW126M has in store for us, shall we?

The power handling.

Being one of the aspects that dictates how good a bass is on a subwoofer, the power handling of this sub is one of its strongest areas.

The nominal wattage or rather the continuous power handling is an outstanding 350 watts. This alone should be enough to ensure the bass is low and loud. For the maximum power handling, it packs an outstanding 1300 watts though it’s highly recommended that you maintain the power range between 100 watts and 300 watts to avoid any sound lags, distortions or blowing the sub

Quality construction

With an IMPP cone, the Pioneer TSW126M will give a tight and accurate bass. All this is credited to nothing else other than the fact that IMPP is one of the most rigid and lightweight materials you could use on a speaker or subwoofer cone.

A high-quality voice coil design

It is always important to keep the voice coil as cool as possible especially when you want to get a high-quality bass. Since we're dealing with subwoofers and its all about the bass, the power supplied to the voice coil will be way more than what you'll get on an ordinary speaker. 

With the new voice coil cooling system on this sub, the voice coil will be able to handle a high power rating hence all you'll be getting is a loud and low-frequency bass.


  • check
    Specially designed voice coil to handle high power levels.
  • check
    An IMPP cone for both a tight and accurate bass
  • check
    The high power rating will be enough to give out a high-quality bass


  • check
    It’s not guaranteed that this will be a perfect fit hence you’ve got to be keen on the measurements before making your purchase.


Q: does it work well with a sealed or a ported box?

A: it is entirely a matter of personal preference. Depending on what you like, you could go for a sealed box for a tighter bass and a ported one for a louder bass

Q: what is the impedance rating on this sub?

A: it’s a 4-ohm subwoofer

Q:is it a shallow mount sub?

A: no, but it is short enough to fit into some shallow mount applications

BOSS Audio AR12D 2400 Watt, 12 Inch, Dual 4 Ohm Voice Coil Car Subwoofer

BOSS Audio Systems AR12D 2400 Watt, 12 InchBOSS Audio Systems AR12D 2400 Watt, 12 Inch

Durability = 80/100

Performance = 80/100

User-friendly = 70/100

It's not hard to get an enclosure for this and the fit is perfect for almost any vehicle. Both the cone and the surround are durable and coupled up with the power rating, the impedance, and the frequency response, it's bound to give an outstanding sound

Yet another outstanding subwoofer from BOSS Audio, we’ve got the BOSS Audio AR12D. With the much that this subwoofer packs under the hood, it is definitely going to give you the biggest bang for your buck. Let’s have a look at what it’s got in store for us, shall we?

4-ohm voice coil

Starting with the voice coil, you’ll be getting a 2” 4-ohm dual voice coil. The same is also made of copper. Being a dual 4-ohm coil, you could wire it up differently as per the wiring in your vehicle to get the most out of it.

Being a copper coil, it will take a reasonably high amount of power before it blows or gives out a distorted bass which is clearly something nobody would want to deal with.

28Hz for the resonating frequency.

Since it’s all about getting the bass going low and loud as possible, the BOSS Audio AR12D has got a resonating frequency of as low as 28Hz. As compared to other subs in its class, it outdoes the rest by far.

85dB sensitivity rating.

So as to give you a loud bass at the lowest frequency and at the same time only get to use a fairly low amount of power, the sensitivity rating on this subwoofer is 85dB.

Working hand in hand with the dual 4-ohm voice coil and with the quality construction for the cone and the surround, you can depend on this for a decent bass quality.

Quality material construction

The cone is poly injected and considering it’s got polyurethane in it which is lightweight, rigid and at the same time durable, you’ll be getting a high-quality sound for quite a long time.

The surround is a butyl rubber surround. This is reputed for its resistance to chemicals, impermeability to air and can resist almost any extreme weather condition. Above all else, it is one of the most flexible hence can be relied on in delivering a high-quality bass.


  • check
    A dual 4-ohm impedance guarantees optimal power utilization and can be connected as you prefer as well.
  • check
    With the resonating frequency being as low as 28Hz the bass can get quite low and deep.
  • check
    The quality material construction guarantees a good sound quality and is simultaneously durable than most subs in its class


  • check
    To prevent failure, break the speakers in for a few hours before you go all the way on the bass


Q: what is the mounting depth on this?

A: it’s 8 inches

Q: what is the frequency response for this sub?

A: should range somewhere between 35Hz and 400Hz

Q: can this be installed in a box for an AV receiver?

A: yes, this could work

Pioneer TSW311D4 12- Inch. 1400 Watt Dual Voice Coil DVC Subwoofer

Build quality = 90/100

Durability = 80/100

Performance = 80/100

It’s got an IMPP cone, an outstanding power handling as well as a dual 4-ohm impedance. The surround is an elastic polymer for the best bass and with a 95dB sensitivity, you’ll get the bass loud and low.

Now here’s another outstanding sub from pioneer. For starters, the design and build quality of this subwoofer is just one of the best. The cone for starters is an IMPP composite cone which is meant to give you a durable cone structure and at the same time give a powerful and accurate bass.

The subwoofer also gives a single piece cone and a drive cone; there is also a lightweight and rigid dust cap added on to it which ends up giving the cone utmost rigidity. The lightweight and durable nature of the cone allows it to withstand even the highest pressure without failure.

A new spider assembly.

Rather than assembling the spider directly into the basket, the design you’ll be getting on this cone is assembled onto the spider holder.

This greatly prevents additional vibrations since the cone as well is assembled onto the basket. With the independent design of the spder holder, the vibrations coming from the cone are minimized. At the end of the day, you’ll be getting an improved playback response, sound outline as well as higher linearity.

Cooling and ventilation.

Besides just the heat the speaker will be getting from the power it is supplied with, the fast-moving parts will generate a lot of friction hence the production of a lot of heat. This, in turn, leads to unwanted audio results.

With the ventilation design of the Pioneer TSW311D4, there is an improved air flow system that releases the heat and keeps the piston cool for better performance.

Power handling.

Just like other pioneer products, this one too does pack a lot of power. With as much as 400 watts for the RMS with each coil having an outstanding wattage rating of 200 watts, it sure is bound to give you the biggest bang for your buck.

Besides the RMS, you’ll also be having the peak power which is an outstanding 1,400 watts. This sub can hardly be compared with most you’ll get in the market today.

The frequency response

Though most people tend to overlook the significance of the frequency response, it’s actually one of the most important aspects to take into account.

With the range being between 20 and 125Hz, you’ll definitely be enjoying a low bass and a little bit of the mid-bass frequency.

Also, the fact that it comes with a sensitivity rating of an outstanding 95dB allows the bass to be loud and low and at the same time, you get to use a little bit of power.


  • check
    20-125Hz frequency response for a loud and low bass.
  • check
    The venting keeps the subwoofer components cool for a clear bass.
  • check
    With the high sensitivity, you’ll be using less power for a loud and clear sound


  • check
    Like most subwoofers, you should observe the power rating on this one. You may also have to break it in before going all the way on the sound


Q: can I run one at a 1500-watt amp?

A: this may be a little too much since the RMS is 400 watts

Q: do I get one or two of these?

A: only one

Q: does it have a hard thump and a clear response?

A: yes, it does

Rockford Fosgate P3D4-12 Punch P3

Rockford Fosgate P3D4-12 Punch P3 DVC 4-Ohm 12-Inch 600-Watt RMSRockford Fosgate P3D4-12 Punch P3 DVC 4-Ohm 12-Inch 600-Watt RMS

Build quality = 80/100

Performance = 80/100

The fit = 80/100

Has got a flex fit basket for a perfect fit. The power rating and impedance are outstanding. The voice coil is a high temp for maximum durability.

Rockford is renowned for giving us some of the best car audio components. Well, let’s find out whether this one is really worth being among our best 12 inch subwoofers review, shall we?

VAST vertical attached surround

In order to increase the cone area, the subwoofer’s surround is constructed with the vertical attach surround technique. This ensures that you get an outstanding bass and simultaneously does not make installation a problem.

Flex fit basket design

To give you a perfect fit in most applications, the basket has got the flex fit design hence it won’t be that much of a fuss to have it in place.

A thermal anodized aluminum cone

In order to properly dissipate the heat build-up from both friction and the power supplied to it, there is an aluminum voice coil included. At the same time, you’ll be getting a clear sound and it won’t threaten to give in even at high pressure.

High temp voice coil

In order to ensure that you get to enjoy the subwoofer’s operation for the longest possible time, there is a high temp voice coil included within it.

Even at the 600-watt RMS, this high temp coil will stand up quite well.


  • check
    VAST surround for an increased cone area
  • check
    The high temp voice coil makes it ideal for handling high amounts of power.
  • check
    With the flex fit basket design, it will have a perfect fit for most applications


  • check
    To avoid blowing it up, break in the sub for a few hours then you can go high on the volume.


Q: which amp is ideal for running two of these?

A:a 1000 watt amp at 2 ohms should do the trick.

Q: which enclosure would go well with these?

A: a ported one should work

Q: do I get a pair of these?

A: no, you’ll only be getting one of these.

Skar Audio EVL-12 D2 12" 2500 Watt Max Power Dual 2 Ohm Car Subwoofer

Skar Audio EVL-12 D2 12 inc  2500 Watt Max Power Dual 2 Ohm Car SubwooferSkar Audio EVL-12 D2 12 inc  2500 Watt Max Power Dual 2 Ohm Car Subwoofer

Performance = 90/100

Durability = 80/100

Build quality = 80/100

It's got an advanced airflow cooling design and a double stacked magnet. It’s also a dual 2-ohm sub with a 120-watt RMS- guaranteed to give a window-rattling bass.

The final item among our best 12 inch subwoofers is the Skar Audio EVL-12 D2. Skar Audio is one of the best as far as giving you the best. Let’ what qualifies it among one of 2018’s best 12 inch subwoofers.

Dual 2-ohm configuration

With the 2-ohm configuration, this sub will be able to take in quite a substantial amount of power. The fact that it is a dual voice coil makes it possible for you to connect it differently and even better, you can get a 1-ohm impedance from this as well.

Power handling

With an outstanding 1250 watts for the RMS and double this for the peak, the subwoofer qualifies as an audiophile-grade sub. With the advanced cooling air flow system, you won't have to worry about the sub getting damaged by the high temperatures.

The 4-layer black aluminum ccaw voice coil allows for extreme power handling even for extended periods of time.

30-300Hz frequency response

It’s all about getting the bass real low and real loud. So as to make this possible, the frequency response ranges between 30 and 300Hz.

You’ll be able to enjoy both a deep booming bass as well as the midbass frequencies.


  • check
    1250-watt RMS rating will definitely give a loud window-rattling bass.
  • check
    30-300Hz frequency response guarantees a low and loud bass.
  • check
    Advanced cooling air flow design prevents damage even at a high power rating


  • check
    The smell it's got out of the box with may take sometime to fade off


Q: can it be run from the receiver

A: no, it can’t

Q: does the smell really wear off?

A: yes, though it may take some time

Q: can they be used on the doors?

A: no, they are subwoofers, you may need an enclosure, however.

Final verdict

Coming to the end of ourbest 12 inch subwoofers review, getting the best 12 inch subwoofer shouldn’t be a problem right now. There’s also a buying guide on how to get the best subwoofer which should let you in on everything you need to know about getting what you need.

We’ve got everything for everyone. Whether you’re on a budget or whether you want a 12 inch sub that will give you a window-rattling bass, you can always rely on us.

All in all, just as it is the case for any audio components, you ought to take your time when shopping for one if you really do want the best.


Click Here to Leave a Comment Below 0 comments