Best Component Speakers – Only Choose from The Best of The Best.

As much as there are a lot of options to getting the best sound in your car, you can never really know exactly what to go for especially if you’re doing your first upgrade.

On that note, I’d like to draw the curtains in this section and let you in on a little secret of mine on how to get yourself the best component speakers.

All things considered, you could get yourself a hybrid speaker system for your vehicle or alternatively, you could also go for the component speakers.

What most people do not know or simply overlook is the fact that if you want to get the best possible sound in your car, a component speaker system is the best way to go.

truth be told, getting the best set up for your car is no easy task but on the bright side, if you get just the right components, you’ll thank me later.

3 Best Component Speakers Picks in 2018

Contents

3 Best Component Speaker Picks

To save you the hassle of reading all through, you could have a quick look at 3 of our best speakers.

Product Image

Key Features

Pioneer TS-165P + TS-695P Two Pairs 200W 6.5" + 230W 6x9" Car Audio 4 Ohm Component Speakers
  • check
    Pioneer TS-165P 6.5 2-Way Speakers
  • check
    Pioneer TS-695P 6" x 9" 3-Way Speakers
  • check
    Impedance 4 Ohms
BOSS Audio CH6CK 350 Watt (Per Pair), Component Car Speakers With Two 6.5 Inch Speakers, Two Tweeters and Two Crossovers
  • check
    Impedance: 4 Ohms
  • check
    Frequency Response: 60 Hz - 20 kHz
  • check
    Sensitivity: 92 dB
Nakamichi NSE-60S 6.5" 2-Way Component Speaker System
  • check
    Shallow Mounting Depth of 2.5"
  • check
    Polypropylene Cone with Rubber Surround
  • check
    Wireless Remote: No

Why is it preferable have the woofer and tweeter separately installed?

Whether it is the aftermarket or the factory installed speakers, you probably may be having the normal coaxial speaker installed in your car.

Truth be told, as much as it will be the most convenient way to get an outstanding sound quality from only one speaker opening, the combined design of the woofer and tweeter are both compromised in this arrangement.

Here’s what happens when you have the best component speakers.

what happens when you have component speakers.

Enter your texWith the component speakers, you have the woofer and the tweeters as separate drivers. To make things even better, you could introduce a crossover so that each of them performs better individually.

Have the tweeters as close to ear level as possible. For the best sound output from the tweeters it is best that you have them installed high up. 

Higher frequencies are more directional as compared to the low frequencies hence you’ll be able to feel the optimal performance of the tweeters if they are at ear level best.

As much as you’ll need the tweeters up, they should also be as close to the woofer as they can be, if otherwise, the different frequencies from the two may reach your ear at different times.

Crossovers: for those who have no idea what the crossovers are, think of them as an audio cop for either your radio or amp. With the external crossovers, the frequencies that are above a given point will go to the tweeters and those below this point automatically go to the woofer. You could have them tucked in your door or dashboard.

With the crossover and the tweeters in position, you should now have the woofers in place. It’s not hard to mount these, the component woofers can be placed in your automobile’s factory locations and most likely in the doors. 

This should be free from any physical tweeter interference since with the more resonant low frequencies, there will be a better foundation for detailed highs.

Merits of having component speakers.

With component speakers in your car, you’ll get a better, higher and wider sound. Nonetheless, here are some of the 3 major benefits of having components speakers.

An outstanding tonal clarity.

This is where you’ll really get to appreciate the crossover network since this frees up the woofer and tweeter to focus more on their assigned frequencies.

With a defined crossover point, each driver is kept from straining and trying to play the limits that it is not meant to handle. It just so happens that with the new boost in sound clarity, you will be surprised by how much different the music you are used to listening to sounds now.

Better sound visualization.

There’s nothing as good as the experience of separating all the sounds you listen to and getting a whole new visualization. With the raised sound stage, the clarity in tone, frequency and stereo separation, you’ll feel like you are enjoying the moment as it happened or rather you’ll get the concert experience.

Better soundstage.

Whereas the factory installed coaxial speakers make the sound seem to be hovering below you, installing component speakers will definitely give you a whole new experience. With the tweeters elevated to the dash, the sail or ‘A’ panels of your vehicle, you’ll have the stage raised hence you get the illusion of the music sounding like it is right in front of you.

Amplifiers make things even better

The best thing about component systems is that they are made to handle higher amounts of power as compared to coaxial counterparts of the same brand. If you have an external amplifier, they’ll definitely sound better.

Note: if you aren’t planning to have an onboard amp added, ensure the component speakers are meant to perform at their best only on deck power.t here...

Only Choose From 15 Of the Best Component Speaker.

Only Choose From 15 Of the Best Component Speaker.

Moving on to the second section of our review, let’s have a look at 15 of the best component speakers you could get for your money.

1. Pioneer TS-165P + TS-695P Two Pairs 200W 6.5″

Pioneer TS-165P + TS-695P Two Pairs 200W 6.5

Starting us off on our list is the Pioneer TS-165P. well, one thing that’s guaranteed with this component speaker is that if you are on a budget, then it is definitely something worth having a look at.

Starting with the design, it comes with a carbon graphite IMPP interlaced Aramid Fiber Cone. Other than being quite durable, the carbon fiber cone gives the speaker enough room for movement so that you’ll end up with the best sound quality.

As for the surround, it comes with the lightweight Eastic Polymer. Besides being highly sensitive so as to allow for the best sound quality, the surround will also be able to stand up to high temperatures, cold conditions as well as moisture.

Pros

  • check
    The carbon graphite IMPP interlaced Aramid fiber cone gives you an awesome sound and is durable as well.
  • check
    The surround offers both outstanding sensitivity and durability.
  • check
    The 4-speaker set up gives you a whole new music experience.

Cons

  • If you like a large bass, these components may be somehow lacking this

Frequently asked questions

Q: how many speakers do I get in one set?

A: 2 pairs hence 4 speakers in total

Q: how is the bass quality on the speakers

A: even though they sound good, they give a better high than the bass

Q: what is the size of the speaker?

A: 6 by 9 inches

2. BOSS Audio CH6CK 350 Watt

BOSS Audio CH6CK 350 Watt

As far as sound quality is concerned, the design and construction of every inch on this speaker is meant to make things sound as best as they could.

Starting with the surround, it is made of rubber. Rubber is one of the best materials you could have as a surround on your speaker since not only does it allow enough room for vibration but it also stands up to high temperature, cold and doesn’t give in to moisture contact.

The 92dB sensitivity on the other hand ensures that you get a high sound quality and at the lowest power consumption.

As for the coil, it is the poly injection type (polyurethane to be specific). This is a resilient, flexible as well as durable manufactured material that allows for maximum flexibility which in the end will give you the best sounding speakers for the longest time possible.

With the mylar tweeters, there is a wide variance of the sound modifications and channel handling. As compared to the paper cones, the durability on mylar is better since the cone material is plastic poly which neither rips nor tears easily.

Pros

  • check
    The polyurethane cone allows for maximum flexibility hence best sound quality.
  • check
    With the rubber surround you get the best possible sound output.
  • check
    Included out of the box are speaker grills for mounting your set up

Cons

  • They are not guaranteed to fit in all vehicles. Just make sure you take the measurements first.

Frequently asked questions

Q: do the tweeters come with a flush mount cup?

A: yes, they do.

Q: will they easily blow out?

A: no, the sound is excellent

Q: how many speakers do I get out of the box?

A: 2 speakers and 2 tweeters

3. Nakamichi NSE-60S 6.5″ 2-Way Component Speaker System

Nakamichi NSE-60S 6.5" 2-Way Component Speaker System

As far as power is concerned, theNakamichi NSE-60S, being a component speaker has one of the best. Considering getting component speakers is all about having the best sound quality and music experience, the 30 watts of RMS power and 400 watts of peak power will allow you to listen to almost any music genre and have the best experience.

The cone is made out of polypropene which just so happens to be one of the best you could get on a speaker. This allows for enough speaker movement hence giving you the best sound at the end of the day.

With the rubber surround, not only do you enjoy durability when it comes to standing up to extreme cold or temperatures, but it also turns out to be thebest surround when it comes to giving the speaker enough room for movement hence the best sound quality.

Pros

  • check
    Outstanding power handling- 30W RMS and 400W peak voltage.
  • check
    Rubber surround is both durable and allows for the best sound quality.
  • check
    With the polypropene cone, you get the best sound output especially on the bass.

Cons

  • Though the sound is great, the crossover may be a bit large.

Frequently asked questions

Q: what are the dimensions of the package?

A:16.5 x 10.2 x 4.2 inches

Q: how is the power handling of the speaker system?

A: has an RMS of 30 watts and a peak of 400 watts

Q: how is the sensitivity of the speaker system?

A:comes with 89dB. This gives you a better sound quality at low power consumption.

4. 2 Kicker DS62 6″ 240 Watt 2-Way Component Speakers

2 Kicker DS62 6" 240 Watt 2-Way Component Speakers 11DS62 4-Ohm

Starting with the design, the 2 Kicker DS62 comes with UV-treated surrounds which will give you a precise linear excursion and in addition to this you end up getting the finest sound. The component speaker also features a heavy-duty motor structure and extended voice coil woofer technology for an outstanding performance and better music realism.

Something else to point out about the sound is that the speaker comes with titanium-dome tweeters with an oversized voice coil. This is able to deliver an outstanding definition and can also be mounted in 3 different ways for more convenience.

The mounting depth of the speaker is also smaller hence it will be easier for you to upgrade on your vehicle’s doors or in the kick stands.

The external two crossover network features 3-position tweeter levels that allow or dialing higher frequencies.

Pros

  • check
    240W peak power and 120W RMS per pair allow you to play a number of tunes without a distorted sound.
  • check
    Comes with a heavy-duty motor structure for an improved performance.
  • check
    The reduced mounting depth allows for an easy fit in your doors or kicks panels.

Cons

  • Not specified. 

Frequently asked questions

Q: does it come with tweeters?

A: yes, it does.

Q: will it come with other mounting hardware

A: yes, it has these out of the box.

Q: how is the power handling?

A: the RMS is 60 watts per speaker and 120 per pair while the peak is 120 watts per speaker and 240 per pair.

5. Infinity Primus 6 1/2″ Component Speaker System

Infinity-Primus-6

As far as getting a budget component speaker is concerned, the infinity Primus will definitely blow your mind. Well, let’s have a look at what it’s got in store for us.

Power handling: the peak is 320 watts for every pair and 160 watts for each. As for the RMS, it is an outstanding 160 watts per pair and each of them has 80 watts. With such a power handling, you’ll get to play your favorite tunes without the sound getting distorted or damaging the speaker.

The surround is the hi-roll rubber type. Rubber just so happens to be one of the best materials you could have on your surround since it is able to stand up to high temperatures, extreme cold and moisture as well.

Installation of the tweeters is made easier since out of the box, you get starfish mounting brackets. These can be used to install the tweeters in the factory locations.

Pros

  • check
    Polypropene cone material for a decent sound quality and good bass output.
  • check
    The hi-roll rubber surround allows for easy speaker movement and is durable as well.
  • check
    The power handling on both the peak and RMS

Cons

  • You may find the treble to be too much in some cases.

Frequently asked questions

Q: are the crossovers passive or active?

A: it comes with a 6dB octave HP/LP passive crossover.

Q: does it come with mounting hardware such as screws and brackets?

A: yes, it does.

Q: are there 2 of the 6 ½ and 2 tweeters?

A: yes, these are what you get out of the box.

6. Infinity Reference 6030c

Infinity-Reference-6030cs-6.5-Inch-270-Watt-Two-Way-Component-System

Starting with the design, the Infinity Reference 6030c has got a rubber surround. With this, you end up with the best bass output, even better, it allows enough vibration room for the speaker, has a higher efficiency and just so happens to be the best when it comes to standing up to extreme temperatures and moisture.

With the edge-driven textile dome tweeters offer an increased power handling and in addition to this, the distortion is reduced at high output levels.

The speakers come with a laboratory-optimized passive crossover networks that also have got tweeter level adjustment. This ensures that you get the best music imaging as well as an outstanding sound visualization.

The plus one woofer cones on the speaker has got more surface area as compared to the competing models of the same size. In the long run, you end up with an increased bass output and a higher efficiency.

Pros

  • check
    Rubber surround for the best bass output
  • check
    To facilitate installation of the tweeters, the infinity’s patented I-Mount is included.
  • check
    The edge-driven textile tweeters offer a better power handling and reduce the distortions

Cons

  • The crossover is delicate and can easily be damaged during installation

Frequently asked questions

Q: do they need an amp or can I install them with the factory radio?

A: you can install them without an amp

Q: does it come in a pair?

A: yes, it does, and the sound is great

Q: what is the cut-out diameter for the tweeters?

A: this is 52mm. they are however small enough to fit anywhere and have a lot of hardware mounting options.

7. Polk Audio DB6501 6.5-Inch 2-Way Component System

Polk-Audio-DB6501-6.5-Inch-2-Way-Component-System

As far as component speaker are concerned, be sure to have your mind blown by the Polk Audio DB6501. For starters, the adaptor rings make it easy to be able to fit the Polk Audio DB6501 in both the 6 ½ and 6 ¾ inch applications.

The woofers feature a polymer/mica composite cone. This composite design will give you a better bass and outstanding sound quality in general as well as utmost durability.

Besides the outstanding cone on the woofers, they also have a butyl rubber surround. This just so happens to be the best possible surround material you could get on a woofer since not only does it allow enough room for speaker movement but it is durable to extreme temperatures as well as moisture.

As for the tweeters, they are the 25mm liquid-cooled silk/polymer composite dome with a neodymium magnet that gives you a high, clear and detailed sound.

Pros

  • check
    The woofers have a polymer/mica composite cone for a better sound quality and durability.
  • check
    With the butyl rubber surround, there is enough room for speaker vibration and is also the most durable.
  • check
    The composite dome tweeter design with neodymiummagnet gives a high, clear and detailed sound.

Cons

  • Though the crossovers fir in most vehicles, it may be a hassle to fit them in some.

Frequently asked questions

Q: is an amp necessary to run these speakers?

A:it is not necessary but would definitely sound better.

Q: how do I connect the cross overs?

A: there is an in and out. All you have to do is connect the speakers to the crossovers and use your existing stock speaker wires to the crossover.

Q: how many woofers, crossovers and tweeters do I get?

A: you get 2 tweeters, 2 woofers and 2 crossovers.

8. CT Sounds Meso 6.5 Inch Component Speaker Set

CT-Sounds-Meso-5x7-Inch-2-Way-Silk-Dome-Coaxial-Car-Audio-Coax-Speakers

Considering all the reasons there are for you to get a component speaker system for your car, one thing that’s for sure is that getting what is going to offer you what you really want is no easy task. Well, let’s have a look at what it’s got in store for us…

The cone, for starters, is the glass fiber type. This one turns out to be the best when it comes to giving you an acute accuracy in mid-range sounds as well as resistance to wear and tear and also standing up to extreme temperatures.

As for the surround, the CT Sounds Meso comes with the NBR rubber surround. Besides being durable, it also allows enough room for utmost speaker vibration so that you end up with the best sound quality.

With the cast aluminum basket, you get both a lightweight and strong design on your speaker. You therefore do not have to worry about looking for a replacement real soon.

Pros

  • check
    The 25mm silk dome tweeters ensure that you get comfortable and clear sound.
  • check
    Glass-fiber cone. This is both durable and gives you utmost accuracy on the sound.
  • check
    With the cast aluminum basket, the speaker just so happens to be one of the strongest

Cons

  • The speaker is 50W RMS and not 100RMS as listed.

Frequently asked questions

Q: is this a 3-way component set?

A: no, it’s a pair of 2 6.5-inch woofer and 2 1-inch tweeters

Q: what gauge wires do these terminals take?

A: it can take up to 12-gauge wires. The lower the number the thicker the cable.

Q: what is the cut hole for the 6.5 inch?

A: the 6.5” coax is 5.6” and the component is 5.8”

9. CT Sounds Strato 6.5 Inch Component Full Range Speaker Set

CT-Sounds-Strato-5.25-Inch-Coaxial-Car-Speaker-Set

We’re now already past halfway on our list. Let’s see what the CT Sounds Strato packs under the hood then, shall we?

First of all, the included crossover network has got a crossover point of 3.5kHz. this ensures that the high frequencies are only received by the 19mm silk dome tweeters. Speaking of the tweeters, the fact that they are silk dome gives them utmost clarity and no sound distortion at all.

The magnet is the 14oz ferrite magnet which pushes these speakers to their limits so that you only end up with the best tonal accuracy.

As for the cone, it is the IMPP design. This is made when polypropene is injected as a foam within a speaker mold so that the retained air bubbles make it lightweight and at the same time, strength is not compromised.

As for the surround, it is the NBR rubber. This is able to stand up to extreme temperatures and moisture as well, more so, it gives the speaker enough room for vibration.

Pros

  • check
    The 14oz ferrite magnet ensure you get the best tonal accuracy.
  • check
    The NBR rubber surround gives you a durable speaker with the best sound quality.
  • check
    The IMPP cone design offers a high sound quality, a lightweight cone without compromising on durability

Cons

  • No wiring harnesses are included out of the box.

Frequently asked questions

Q: can the speakers mount to the woofer?

A: no, they can’t mount to the woofer

Q:how do they sound on a factory head unit?

A: the sound is awesome on a factory stereo system.

Q: does the 1 qty come in a pair?

A: yes, it does

10. MB Quart XC1-216 90-Watt Car Audio Component 6.5 Inch Speaker

MB Quart XC1-216 90 Watt Car Audio Component 6.5 Inch Speaker Systems X-Line

10th on our top 15 list of 2017 is the MB Quart XC1-216. Truth be told, this surely is a game changer when it comes to upgrading your stereo system.

Here’s what its got in store for you…

Power handling: when it comes to power handling, you get an outstanding peak of 180 watts per set and 90 watts on each side. As for the RMS, each set has got 90 watts while the individual sides have 45 watts each.

This, in the long run allow you to play a number of tunes at a reasonably high volume without sound distortion or damage. For the best performance however, it is recommended that you maintain the minimum power at 10-75 watts RMS.

The component speaker features a 25mm pure titanium dome tweeter with a silk surround mated to a 20mm KSV voice coil. This combination ends up giving you a high frequency extension.

The midrange has got strong injection molded cones and the baskets are made from a glass fiber reinforced PA66 composite to eliminate any unwanted sound from the music.

Pros

  • check
    The peak and RMS allow you to play different tunes without damaging the speaker.
  • check
    The baskets are made form a glass fiber with PA66 composite to eliminate unwanted resonance.
  • check
    With the titanium dome tweeter-silk surround mated on the 20mm KSV voice coil, there is a higher frequency extension

Cons

  • Not specified.

Frequently asked questions

Q: is the price for 2 speakers or 4 speakers?

A: the price is for the4 component set.

Q: how is the sound quality?

A: if you want crystal clear mids and highs, you should get these.

Q: will I need an amp?

A: you don’t have to get one but for a better sound, you should

11. Alpine SPR-60C 6.5″ Car Audio Component System (Pair)

Alpine SPR-60C 6.5" Car Audio Component System (Pair)

If you are willing to push your limits and spend on your stereo system, then you should definitely consider checking out the Alpine SPR-60C.

Starting with the sensitivity, the Alpine SPR-60C has got 87dB. If you’re looking for a decent sound quality, this component speaker will definitely do you justice. As for the power rating, it is rated at220 watts per set and 110 watts on each side; the peak on the other hand is 660 watts per set and 330 watts on each side.

Another outstanding feature about the speaker set is that on the crossover, you can be able to change the dB settings on the tweeters so that the sound (especially the treble will not be irritating at all).

Mounting won’t be a problem. When it comes to the installation of both the crossovers and the speakers, they can easily be placed on the front doors of most cars.

Pros

  • check
    The DB on the tweeter can be adjusted on the cross over.
  • check
    The 87dB sensitivity gives you a decent sound quality that will be loud enough even with factory stereo.
  • check
    The highs are clear enough and so is the mid-bass.

Cons

  • Be careful not to damage the speakers when adjusting the settings on the cross over

Frequently asked questions

Q: which amp should I use on these speakers?

A: a 300 watt or a 400-watt amp should do.

Q: what is the hole saw size for the tweeters?

A: they are 2” holes.

Q: does it come with adapter plates to fit 6×8 holes?

A: yes, it does.

12. Focal PS 165 6.5″ 160 Watts RMS 2-Way Performance Series

Focal PS 165 6.5" 160 Watts RMS 2-Way Performance Series Component Speakers System

As far as getting an outstanding sound is concerned, the Focal P165V15 will give you nothing but the best. Starting with the power handling, it has got an RMS power handling of 80 watts and the peak power is an outstanding 160 watts.

To give you the best sound, the cone is made of polyglass. Other than delivering a decent bass quality above all else, the overall sound quality you get from the speaker is at its best. With polyglass, the strength of the cone is also better as compared to polypropene which you’d get on most speakers.

One other important feature on the speaker construction is that it comes with a butyl surround. This, being rubber is tolerant to extreme temperatures as well as moisture.

To make the sounds even more detailed, the tweeters have an inverted aluminum dome. This creates a broader sound stage. The tweeters also have a neodymium magnet so as to produce a strong magnetic field for all the voice coils and at the same time maintain the compact dimensions of the tweeter.

Pros

  • check
    The polyglass on the cone is stiff, lightweight and has got excellent damping for the best sound.
  • check
    The butyl rubber surround is moisture resistant and doesn’t dry rot hence you get years of service.
  • check
    The inverted dome aluminum design on the tweeters creates a broader sound stage on the tweeters.

Cons

  • At higher frequencies, the tweeters may slightly distort.

Frequently asked questions

Q: how big are the tweeters?

A: the frame diameter is 1.886”, the cutout diameter is 1.677”, the width is 1.887” 1.894” and the surface depth is 1.887” 2.865”

Q: what are the switches on the crossover for?

A: they are for tweeter adjustment. You can use these to set the tweeter as per your preference

Q: which wires should I use to hook them up?

A: you need a 12-16-gauge pure speaker cable to do this.

13. Focal Access 165 A1 6.5-Inch 2-Way Component Speaker Kit

Focal Access 165 A1 6.5-Inch 2-Way Component Speaker Kit

We’re almost done with our list now. Let’s have a look at what the Focal Access 165 A1 packs under the hood.

Starting with the design, the Focal Access 165 A1 features a butyl rubber surround. Rubber just so happens to be one of the best materials you could use as a surround since it is able to stand up to both moisture and extreme temperatures and will give the speaker enough room for movement.

As for the tweeters, they boast the inverted dome tweeter technology. This offers outstanding rigidity and lowers any distortions on the sound.

The crossovers:

The 12/12dB/octave (5kHz) separated Access crossoverhas got polypropene capacitors which give the speaker both high and distortion-free dynamics. You can also be able to refine the tuning on the tweeters in all locations.

  • check
    Adjustable tweeter level- this enables the adjustment of tweeter level control according to their locations with just a simple switch.
  • check
    The air core inductors, on the other hand, are insensitive to parasite interferences

Pros

  • check
    dThe glass fiber is humidity resistant and has got the precision and dynamics of the mid-range while giving a deep and articulated bass.
    fdf
  • check
    Out of the box, the speaker has got grills which make mounting easier.
  • check
    With the aluminum inverted dome tweeter technology, you get significant rigidity and lowered distortion.

Cons

  • If you don’t know how to handle the tweeter settings, their sounds may be too much for the ear

Frequently asked questions

Q: does it come with grills?

A: yes, it does

Q: does the dual fiber glass give more sp than poly glass cone?

A:yes, it does

Q: what is the RMS? Can a 4 channel 75-watt amp do them justice?

A: they are rated at 50 watts RMS hence 75 is more than enough.

14. ESK-165.5Hz 6.5″ 300W Peak 2-Way Component Speaker System

ESK-165.5 - Hertz 6.5" 300W Peak 2-Way Component Speaker System

Second last on our list is the ESK-165.5. as far as getting a component speaker is concerned, this one just so happens to be one of the few that will give you the biggest bang for your money.

Let’s have a look at what it’s got in store for us…

The design:

With the Vcone technology, you’ll have the best off-axis response and in addition to this, there is a clear mid-high frequency detail. The paper cone on the other hand is water-repellent hence you don’t have to worry about contact with moisture.

As for the surround, this is made out of butyl rubber which just so happens to be one of the most durable and flexible surrounds you could get.

Power handling:

When it comes to the peak and RMS ratings, the ESK-165.5 boasts to have as much as 100 watts of RMS power and 300 watts of peak power.

Pros

  • check
    With the water-repellent treated paper cone, you get utmost durability from the speaker.
  • check
    The butyl rubber surround is tolerant to extreme temperatures and moisture for the best performance.
  • check
    The 100W RMS will be more than enough to play different music genres on the speakers

Cons

  • Only a few mounting accessories come with the speaker.

Frequently asked questions

Q: do the tweeters mount inside the speaker

A: no, you’d have to make a bracket to mount in the speaker

Q: what is the RMS per speaker?

A: it is recommended that you feed them with 100 watts of RMS

Q: do they come with a warranty?

A:yes, they do, but it depends on which seller you are purchasing them from.

15. Polk Audio DB6502 6.5″ 300W 2 Way ATV Stereo Component Speakers

2) Polk Audio DB6502 6.5" 300W 2 Way Car/Marine ATV Stereo Component Speakers

Coming final on our list is the Polk Audio DB6502. Being one of the high-end component speakers you could get in the market today, let’s have a look at what it’s got under the hood…

For starters, if you want the most durable, this one’s definitely it. it has been tested for dirt and water resistance as well as waterproof inner and outer surrounds.

The cone, being made out of polypropene just so happens to be one of the best when it comes to giving a clear sound. One more thing that’s worth pointing out about the cone is that it is UV tolerant meaning that you won’t have to worry about it being damaged by UV light.

Power rating. As for the power rating, the Polk Audio DB6502 has got an outstanding 300 watts of peak power and in addition to this, the RMS is 100 watts. These make it an outstanding choice if you are so much into loud music.

The speakers also do feature non-resonant materials. Simply put, these make it possible for you to have extremely clear highs, mids and lows regardless of what you are listening to. All this can be credited to the patented Dynamic Balance technology.

Pros

  • check
    Durable- the Polk Audio DB6502 is water, UV and dirt resistant.
  • check
    Made out of non-resonant materials this you get the best sound quality.
  • check
    The 100W RMS make it possible for you to play loud music without getting a distorted sound or damaging the speakers

Cons

  • Ensure that you maintain the RMS power rating range or use a woofer, otherwise, you may damage the speakers

Frequently asked questions

Q: how do I adjust the crossovers?

A: there is the decibel switch when you pop open the crossover.

Q: do I need an amp to use them?

A: not necessarily but it would give a better sound quality.

Q: how is the surround on the speakers?

A: it is durable and both the inner and outer surrounds are water resistant.

Check the 15 Best Component Speakers at a glance

Best Component Speakers

Product Image

Key Features

Pioneer TS-165P + TS-695P Two Pairs 200W 6.5" + 230W 6x9" Car Audio 4 Ohm Component Speakers
  • check
    Pioneer TS-165P 6.5 2-Way Speakers
  • check
    Pioneer TS-695P 6" x 9" 3-Way Speakers
  • check
    Impedance 4 Ohms
BOSS Audio CH6CK 350 Watt (Per Pair), Component Car Speakers With Two 6.5 Inch Speakers, Two Tweeters and Two Crossovers
  • check
    Impedance: 4 Ohms
  • check
    Frequency Response: 60 Hz - 20 kHz
  • check
    Sensitivity: 92 dB
Nakamichi NSE-60S 6.5" 2-Way Component Speaker System
  • check
    Shallow Mounting Depth of 2.5"
  • check
    Polypropylene Cone with Rubber Surround
  • check
    Wireless Remote: No
2 Kicker DS62 6" 240 Watt 2-Way Component Speakers 11DS62 4-Ohm
  • check
    WILL FIT 6.5" OPENINGS
  • check
    MAX Power Handling: 120 Watts
  • check
    RMS Power Handling: 60 Watt
Infinity Primus 6 1/2" Component Speaker System
  • check
    Peak: 320 watts
  • check
    RMS: 160 watts
  • check
    Polypropylene woofer cone
Infinity Reference 6030cs 6.5-Inch 270-Watt Two-Way Component System
  • check
    270 Watts peak power handling
  • check
    2 Ohm impedance
  • check
    6-1/2-inch two-way component system
Polk Audio DB6501 6.5-Inch 2-Way Component System
  • check
    Overall Frequency Response: 35Hz-23kHz
  • check
    Nominal Impedance: 4 Ohms
  • check
    Efficiency: 92 dB
CT Sounds Meso 5x7 Inch 2-Way Silk Dome Coaxial Car Audio Coax Speakers
  • check
    Glass fiber cone
  • check
    2-Way 25mm silk dome tweeter
  • check
    Impedance 4 ohms
CT Sounds Strato 5.25 Inch Coaxial Car Speaker Set
  • check
    120W RMS | 240W MAX per set
  • check
    4-Ohm Speakers
  • check
    5.25" Car Door Coax Speakers
MB Quart XC1-216 90 Watt Car Audio Component 6.5 Inch Speaker Systems X-Line
  • check
    RMP: 10 - 75 watts RMS each
  • check
    Top-mount Depth: 2.4"
  • check
    Power Handling: Peak: 180 watts
Alpine SPR-60C 6.5" Car Audio Component System
  • check
    Peak Power: 330W
  • check
    RMS Power: 110W
  • check
    4 Ohms Impedance
Focal PS 165 6.5" 160 Watts RMS 2-Way Performance Series Component Speakers System
  • check
    6.5" 2-Way Component System
  • check
    80 Watts Nominal Power
  • check
    160 Watts Maximum Power
Focal Access 165 A1 6.5-Inch 2-Way Component Speaker Kit
  • check
    6.5-inch two-way component kit
  • check
    4-ohm impedance
  • check
    120 Watts MPH
ESK-165.5 - Hertz 6.5" 300W Peak 2-Way Component Speaker System
  • check
    EV 165.5 165mm (6.5") Woofer
  • check
    Mounting Depth: 2.56"
  • check
    Butyl rubber surround
Polk Audio DB6502 6.5" 300W 2 Way Car/Marine ATV Stereo Component Speakers
  • check
    100W RMS - 300W Peak Power
  • check
    Marine Certified With IP65 Rating
  • check
    Polypropylene And UV Tolerant Cone

Final verdict

We now know exactly how to install the component speaker, why you should have it and also how to make it sound even better. As much as any quick search on the internet may give you quite a number of results, we’ve provided to you 15 of the best you could get. Whether you need a budget speaker, a high-end or a mid-range priced speaker, we got it all.

In conclusion, I’d like to insist that you get your stereo system to its highest potential. Just ensure everything is installed in the right position and the amp is in place if need be and you’re good to go.

Best Component Speakers – Only Choose from The Best of The Best.
5 (100%) 1 vote
admin
 

Click Here to Leave a Comment Below 0 comments
%d bloggers like this: