Archive

Category Archives for "Best Subwoofer"

Best 15-inch subwoofer | Best Collection

Subwoofers  happen to be one of the best upgrades you could include in your audio system, right? Well as much as there are a lot of 15-inch subwoofers on the market today, getting the best 15-inch subwoofer is no walk in the park.

There's a lot to be taken into consideration when looking for the best starting from the build quality and down to the little details such as the impedance and the sensitivity. Considering the amount of trouble that you could go through when looking for an outstanding subwoofer, we’ve got an in-depth buying guide of how to get the best sub that you should probably take a look at.

Before we get started, you should probably know that if you want a high-quality bass, you should be ready to go bigger which of course, means that you’ll need to spend more. As much as size and quality go hand in hand you should spend just enough for the qualities that you need- neither too much nor too little.

Let’s get started with a comparison chart of the top 10 right away, shall we?

Read Our Buying Guide Here

Comparison chart- here’s a list of 3 of our recommended choices.

Before we delve into our review, how about we take a look at the best of the best? Below are our top 3 recommended picks.

Product Image

Key Features

Skar Audio DDX-15 D4 Dual 4 Ω 1,500W Max Power Car Subwoofer

Skar Audio DDX-15 D4 Dual 4 Ω 1,500W Max Power Car Subwoofer

  • check
    1,000 watts RMS power
  • check
    1,500 watts max power
  • check
    Dual 4 ohm voice coil configuration
Skar Audio EVL-15 D2 15" 2500 Watt Max Power Dual 2 Ohm Car Subwoofer

Skar Audio EVL-15 D2 15" 2500 Watt Max Power Dual 2 Ohm Car Subwoofer

  • check
    Max Power: 2500 Watts
  • check
    RMS Power: 1250 Watts
  • check
    Dual 2 Ohm Configuration
Rockville RVP15W4 1000 Watt 15" Raw DJ Subwoofer 4 Ohm Sub Woofer 51OZ Magnet

Rockville RVP15W4 1000 Watt 15" Raw DJ Subwoofer 4 Ohm Sub Woofer 51OZ Magnet

  • check
    Power RMS: 500 watts
  • check
    Peak power: 1000 watts
  • check
    Paper composite dust cap

Best 15 inch subwoofer 2018- quality construction & performance

Moving to today’s main agenda, let’s review 10 of the best subs of 2018 starting with one of the best from kicker.

Kicker CWCD154 CompC 15" Subwoofer Dual Voice Coil 4-Ohm

Kicker CWCD154 CompC 15" Subwoofer Dual Voice Coil 4-Ohm

User-friendly = 70/100

Durability = 80/100

Build quality = 80/100

With an outstanding thermal management, an outstanding build quality, a high temp voice coil and a stamped steel basket, it’s both durable and has the best performance

Being one of the brands that have been around for the longest time, kicker just so happens to be one of the companies you can rely on not to disappoint you as far as quality audio components are concerned. With the Kicker CWCD154 CompC, you’ll be getting an audiophile-grade sub that’s durable just as good as it is when it comes to the performance.

Build quality.

Starting with one of the things you can’t miss out on any sub, the cone on this subwoofer is made out of injection molded polypropylene cone. This functions to add both endurance as well as a smooth bass. Being both lightweight and rigid, polypropylene just so happens to be quite outstanding in delivering a quality bass.

Thermal management

Since getting deep bass from our subs goes hand in hand with a high-power supply, there is a perimeter venting included around the Kicker CWCD154 CompC.

This makes heat dissipation easy since there will be a continuous airflow which prevents build-up of heat that could damage the voice coil. Speaking of the voice coil, let’s take a look at how good it is in our next point, shall we?

High temp voice coil

Considering you’ll be having a high- temp voice coil within the Kicker CWCD154, you won’t have to be worried about your sub getting damaged by a lot of heat. With an outstanding heat handling capability, you’ll have quality sound over a long period of time.

Durability

Besides just the thermal heat management and the outstanding sound quality that you’ll be getting, this sub also does have a stamped steel basket that plays quite a huge role in preventing physical damage to the sub.

PROS

  • 1
    An injection-molded polypropylene cone for endurance and a smooth bass
  • 2
    Perimeter venting for thermal heat management
  • 3
    1200 watts peak power for a hard-hitting bass.

CONS

  • check
    You may need an amp to get a window-rattling bass

QUESTION ANSWER FAQ

Q:how big an amp do I need for this?

A: a 1000 or a 1200-watt amp should be enough

Q:is the voice coil good enough

A:yes, it does have a high temp voice coil that takes in a lot of power

Q: how’s the overall performance?

A:outstanding- it pumps out

Planet Audio AC15D 2100 Watt

Planet Audio AC15D 2100 Watt

Construction = 80/100

Durability = 80/100

Performance = 70/100

With the low-frequency response, a durable foam and surround construction coupled up with a 2-inch dual aluminum coil and 89dB sensitivity, it’s absolutely worth checking out.

Planet audio is yet another brand that you should consider taking a look at if you’re all about getting a kick for your buck. Here is all that it’s got in store for you…

89dB for the sensitivity

When it comes to the sensitivity, the rule of thumb here is that the higher it is, the better of the sound quality you'll be having.

with the sensitivity being as high as 89dB, the bass will be loud and clear and considering the amount of power that this sub can handle, you’ll definitely be working with one of the best.

A polypropylene cone & foam surround

For the build quality and construction, you’ll be having a polypropylene cone and around it is a foam surround. The cone, being polypropylene is both lightweight and rigid for the production of quality bass.

As for the foam surround, you'll be having a large enough surface area for continuous production of quality bass. Foam is also credited with being able to maintain its original form for the longest time.

A 2-inch dual aluminum voice coil

Aluminum voice coils are renowned for having high-temperature tolerance which is what you'll also be enjoying on the AC15D. in addition to this, it’s a dual voice coil that will offer optimal efficiency as compared to a single voice coil.

25Hz for the resonating frequency

The rule of thumb when it comes to the resonating frequency is that the lower it is for a subwoofer, the better the bass you’ll be getting. With this being 25Hz on the AC15D, you will, undoubtedly be enjoying audiophile-grade sound quality.

PROS

  • 1
    A lightweight and rigid polypropylene cone for a high-quality bass.
  • 2
    A 4-ohm impedance for maximum power utilization
  • 3
    The 89dB sensitivity ensures that you get a loud and clear bass

CONS

  • check
    If you don’t observe the power rating, you may blow it up in a short while.

QUESTION ANSWER FAQ

Q: can a 1200 watt amp be able to handle this?

A: yes, this should work quite well.

Q: does it come in a pair?

A: no, it’s only one

Q: does it have a dual voice coil?

A: yes, it does have a dual voice coil

Rockford Fosgate P2D2-15 Punch P2 DVC 2 Ohm 15-Inch 400 Watts RMS 800 Watts Peak Subwoofer

Rockford Fosgate P2D2-15 Punch P2 DVC 2 Ohm 15-Inch 400 Watts RMS 800 Watts Peak Subwoofer

The fit = 80/100

Build quality = 80/100

Performance = 80/100

With the power rating and the impedance, the performance is definitely above average. The flex fit basket makes it easy to set up and the cone and surround altogether are well performing and durable.

Take it from an expert, Rockford Fosgate is definitely one of the best brands in the market as far as the best subwoofers are concerned. Comin up 3rd on our best 15 inch subwoofer review, we’ve got the P2D4 and it is definitely worth every penny; here’s why…

A high temp voice coil

Starting with the voice coil, which is also one of the most critical components on a subwoofer, you’ll be getting a high temp voice coil on the P2D4.

It’s got an anodized aluminum voice coil which just so happens to be quite outstanding when it comes to optimal heat dissipation. In a nutshell, it acts like a heatsink that prevents build-up of too much heat in the voice coil during high SPL conditions

Flex fit basket design

Besides just having one of the best coils, it’s also got a flex fit basket design. What this does it that it utilizes slots where applicable instead of using single screw sized holes. This then allows for tight speaker adjustment when mounted hence keeping it in place at all times.

Quality cone construction

For the build quality and construction, you’ll be getting a Kevlar fiber reinforced paper cone. This is both lightweight and rigid as is expected for any cone that is guaranteed to produce a high-quality bass.

Besides just having a quality cone, there is also a high-density poly foam surround all around it that’s flexible hence ensuring the delivery of a loud and high-quality bass.It also incorporates the Vertical Attachment Surround Technique which increases the effectiveness by as much as 25%.

Power handling.

Yet another thing to pay close attention to if you want an outstanding bass is the power handling. Taking this into account, the P2D4 comes with an outstanding 400 watts for the RMS power and 800 watts for the peak.

With the impedance being 2 ohms, you’ll definitely be utilizing most of this power to get a bass unlike any other- you definitely deserve the best

PROS

  • 1
    Flex fit basket design for a perfect fit
  • 2
    The VAST surround increases the radiating cone area for a better sound quality
  • 3
    A high temp voice coil for optimal dissipation of heat

CONS

  • check
    Too much power than the recommended rating may blow it easily

QUESTION ANSWER FAQ

Q: how good is it on a high-frequency bass?

A: it’s very responsive

Q: will a prime r500x1d be enough to push one of these subs?

A: yes, this should be enough

Q: what is the mounting depth of this sub?

A: its 7.34 inches

Rockville RVP15W4 1000 Watt 15" Raw DJ Subwoofer 4 Ohm Sub Woofer 51OZ Magnet

Rockville RVP15W4 1000 Watt 15" Raw DJ Subwoofer 4 Ohm Sub Woofer 51OZ Magnet

Build quality = 80/100

Performance = 80/100

User-friendly = 80/100

From the 51 oz magnet to the voice coil and the power rating, it surely is better than most in its class. It’s got both quality construction and performance all in one

This amp might just be the missing piece of the puzzle for experiencing the best audio. Coming up 4th, we’ve got the Rockville RVP15W4. Let’s get started by taking a look at the power handling it’s got, shall we?

500-watt RMS and 1000-watt peak power.

Being one of the key things that determine whether or not you'll be getting an outstanding bass, the RMS power on this sub is 500 watts whereas the peak is 1000 watts. With the two of these working hand in hand and the impedance being 4 ohms, you'll definitely pump out a bass like no other.

Fiber reinforced ultra-stiff paper composite cone

For the build quality, the cone is made out of a fiber reinforced ultra-stiff paper composite cone. Whereas most subs will have a paper cone alone for the cone, the fiber-cone composite on this one observes both rigidity and lightweight which are the two key features on any cone that’s ideal for a good bass

Still, at the cone, it is worth pointing out that it's got a dust cap added to it which simply adds on to the durability of the subwoofer.

An accordion cloth surround.

Besides just having a good cone, the surround is also quite commendable. Though it’s not the best, the accordion cloth surround should be able to deliver a reasonable level of flexibility and in the long run pump out a good bass

High-temperature voice coil

Since the power rating on this sub is quite high, the Rockville RVP15W4 has got a 2.5"high-temperature CCAW High SPL voice coil. This basically ensures that the high temperatures generated as a result of high levels of power input do not damage the subwoofer's voice coil.

Also…

You’ll be getting a 51 oz magnet, dual nickel-plated banana plug terminals as well as an expanded and rolled steel basket.

PROS

  • 1
    100dB for the sensitivity for a clear bass at a high volume
  • 2
    It’s got a high-temp voice coil that decreases the odds of it getting damaged by high temperature
  • 3
    25 Hz- 1.5kHz for both a low and mid-frequency bass

CONS

  • check
    Having the bass at a very low frequency may give you a distorted sound

QUESTION ANSWER FAQ

Q: can I use this in a car?

A: yes you can; remember it’s a single voice coil

Q: what is the hertz frequency on this?

A: it ranges from 25 Hz to 1.5kHz

Q: can these be used for actual bass bottoms in a DJ set up?

A: yes they’ll work just fine.

Skar Audio DDX-15 D4 Dual 4 Ω 1,500W Max Power Car Subwoofer

Skar Audio DDX-15 D4 Dual 4 Ω 1,500W Max Power Car Subwoofer

Performance = 90/100

Build quality = 70/100

Durability = 80/100

It’s got a high temp dual 4-ohm voice coil, 90.9 decibels the sensitivity is an average cone construction all of which deem thissubwoofer worth every penny

From a 15 inch subwoofer, one thing you’ll be sure of getting is a bass that is above average and one of the features in the Skar Audio DDX-15 that makes it possible for you to have this is the power handling. With an RMS of as much as 1000 watts and a peak of 1500 watts, the bass will definitely be loud and clear.

Besides just the power rating, there are other features that make it worthy of our best 15 inch subwoofer review.

A dual 4-ohm voice coil

Power handling goes hand in hand with the impedance which is why with the 4-ohm voice coil on this, your subwoofer will be able to channel quite a large amount of power.

Upon doing so, you will, in turn, get to enjoy a loud and clear bass. Speaking of high volume and clarity, let’s take a look at the sensitivity next. The fact that this is a dual 4-ohm voice coil renders this subwoofer ideal as far as wiring it up and power utilization is concerned.

90.9dB for the sensitivity.

90.9 decibels for the sensitivity is basically above average and with this being present, the subwoofer will be utilizing less power but at the same time produce a high-quality bass and at a high volume. You won’t have to worry about any distortions, lags or using too much power

2.5"high-temperature voice coil.

Yet another thing that’s worth pointing out about this subwoofer is that it comes with a 2.5"high-temperature voice coil.

Considering the much power that this subwoofer takes in, the Skar Audio DDX-15will not be at the risk of having the voice coil blow up due to too much power. This is yet another reason you should really consider purchasing it

A competition-grade pressed paper cone

Though the cone is not exactly the best of the best in the market, it’s definitely going to do what it’s meant to. The pressed paper cone will definitely be lightweight enough and have just the right amount of rigidity to ensure the bass you have is above average.

Also…

Yet another thing you should know about this subwoofer is that it's quite capable of producing low-end sound frequencies quite effectively which of course means you’ll have an outstanding bass.

PROS

  • 1
    1000W max power and 1500 watts for the peak pumps out quite an outstanding bass.
  • 2
    A high temp voice coil is included for the sake of durability.
  • 3
    A dual 4-ohm voice coil configuration for optimal power utilization.

CONS

  • check
    Just like any other sub out there, be careful how much power you supply to it so as not to blow it up

QUESTION ANSWER FAQ

Q: I want to run 2 12s, will the 4 ohms be enough?

A: yes, they should be enough

Q: will this be able to fit in a sub q bomb ported enclosure?

A:yes it will

Q: why are the 4 ohms better?

A: you can wire it up to 2 ohms or 8 ohms based on your wiring system

Rockford Fosgate P1S4-15 Punch P1 SVC 4 Ohm 15-Inch 250 Watts RMS 500 Watts Peak Subwoofer

Rockford Fosgate P1S4-15

Build quality = 80/100

User-friendly = 80/100

Performance = 70/100

The power rating is reasonably high and with the high temp 4-ohm voice coil, the bass will be outstanding. It’s also got a flex fit basket design for easy installation.

When it comes to choosing a subwoofer based on the brand, then Rockford Fosgate will most probably be among your top 3.  Since it's been around for quite some time now, it's obvious that what Rockford will be giving you is definitely worth every penny. Let's take a look at why this might be the best 15 inch subwoofer

250-watt RMS and 500 watts peak power voltage

Starting with what is probably the most important thing in a subwoofer, the P1S4-15 comes with an RMS power of an outstanding 250 watts and double this for the peak.

Working with such a power handling capability, you can definitely be sure that the bass your system will be pumping out is above average and hardly like any other. Backing up the RMS and peak power is a dual 4-ohm voice coil which we’ll be taking a look at next.

Has got a 4-ohm voice coil

Though it’s not a dual 4-ohm voice coil, the voice coil on this subwoofer should be enough to utilize as much power as possible. After all, the rule of thumb when it comes to impedance ratings on any speaker or subwoofer is that the lower it is, the better the performance

There’s a high-temp voice coil

Since the voice coil has got a 4-ohm impedance, it will definitely be heating up pretty much. In order to ensure that it does not get damaged due to overheating, it’s the high-temp type. This simply makes it difficult for it to be damaged by high temperature no matter how loud you want to play your bass.

Quality cone and surround construction

The cone is a Kevlar fiber reinforced paper cone whereas the surround is a made out of high-density poly-foam. With the lightweight and rigidity of the cone coupled up with the flexibility of the surround, the bass will, without doubt, be outstanding.

A flex fit basked design for a perfect fit

It won’t be any good to you if it won’t be able to fit perfectly, don’t you agree? In order to ensure that you’ll be having a perfect fit, this sub comes in a flex fit design that renders it quite easy to have in place

PROS

  • 1
    Quality cone and surround construction for a high bass quality.
  • 2
    A flex fit design gives you a perfect fit.
  • 3
    With the high temp voice coil, it will beable to take in quite a lot of power

CONS

  • check
    It only comes with a single voice coil

QUESTION ANSWER FAQ

Q: will there be any movement once you screw it in?

A: no, no movement at all

Q:what is the vented airspace on this sub

A: this allows for optimal airflow to reduce the heat

Q: will a Kenwood 1000-watt amp power two of these?

A: yes, it will

Lanzar 15-in Car Subwoofer Speaker MAX15D

Lanzar 15-in Car Subwoofer Speaker MAX15D

Installation = 80/100

Durability = 80/100

Performance = 80/100

With the wide rubber suspension, a Kapton voice coil and a 7.68” mounting depth working altogether, this subwoofer will definitely give you the best experience.

Yet another outstanding 15-inch subwoofer that’s bound to give you a bang for your buck is the MAX15D. From the build quality and construction to the performance, it surely has everything you need to get an outstanding bass quality.

A black non-pressed paper cone

You may probably be thinking that a non-pressed paper cone will not be enough to give out a good bass, right? Well, this subwoofer will definitely prove you wrong.

The cone you’ll be having on this subwoofer enhances the car stereo by producing a powerful audio. Besides just keeping the bass at its best, it also functions to keep the subwoofer safe at all times.

It comes with a Kapton voice coil

Just below the cone is the voice coil. Being possibly the most critical component of a subwoofer that is easily susceptible to damage, the voice coil should be at it’s best.

the coin on this sub is a 2.5”dual layer high-temperature Kapton voice coil. It obviously will be able to handle a high-power rating and in addition to this, it’s quite capable of resisting corrosion

Easy installation

For the installation, I’d say that the 7.68” mounting depth for a subwoofer in it’s class is pretty outstanding. The magnet is a 70 + 70 double stacked hence it does not compromise on the performance and at the same time will be easy to set up

A wide rubber suspension for safety

When it comes to durability and safety, this sub has got a non-fatiguing rubber suspension that keeps all the internal components safe. It is also designed with a bumped and vented motor structure that is durable and at the same time offers easy installation.

PROS

  • 1
    KAPTON VOICE COIL for high-temperature sensitivity.
  • 2
    A wide rubber suspension to keep the equipment safe.
  • 3
    Has for a 7.68” mounting depth for easy installation.

CONS

  • check
    They don’t hit below 32 hertz but otherwise, they’re okay.

QUESTION ANSWER FAQ

Q: how many speakers do I get?

A: you should be getting only one speaker

Q: what is the RMS on these?

A: it comes with a 400 watt RMS

Q: how good is the bass on these?

A: for the price they thump quite well.

Skar Audio EVL-15

Skar Audio EVL-15

Durability = 70/100

Performance = 90/100

Build quality = 80/100

it’s got a high temp voice coil and it’s also designed to last. The foam surround, the impedance and the power handling altogether make it worth every penny

We are almost done with our review of the best 15 inch subwoofer and we’re doing good so far. We’ve got yet another outstanding subwoofer from Skar Audio. Besides just boasting to be from one of the best brands there are on the market, it's got plenty more under the hood; let's take a closer look at it, shall we?

1250-watt RMS rating

When it comes to the amount of power that a subwoofer can handle without blowing it or any sound lags and distortions, you’ll need to pay close attention to the RMS rating.

With as much as 1250 watts for the continuous power, this sub is guaranteed to pump out a bass that’s definitely above average. Skar did not just stop at the RMS but they go a step further to add onto this subwoofer a 2500-watt peak power handling.

Though it might be tempting to play at the highest power possible, you should maintain the RMS to avoid blowing the voice coil. Speaking of the voice coil, let’s have a look at what you’ll be getting on this sub.

3” 4-layer black aluminum CCAW voice coil

The voice coil on this subwoofer is a 3-inch high temperature, 4-layer, black aluminum CCAW voice coil. This makes extreme power handling possible for extended periods of time.

Besides just the voice coil being able to handle high temperatures quite effectively, the design of the motor structure is in such a way that there is continuous air flow.

With the high temp voice coil and an advanced airflow cooling design included on the subwoofer, it definitely is meant for anyone who’s looking for an above-average performance.

Dual 2-ohm configuration

Other than the voice coil being quite ideal in handling high temperatures, it's worth pointing out that it comes in a dual 2-ohm configuration.

This allows for it to utilize a lot of power regarding how much you supply it. In addition to this, you can wire it up differently depending on how your audio system is wired up

Comes with a high roll foam surround

Yet another striking feature of this sub is the high roll foam surround it comes with. This has got a large surface area for optimal bass production and at the same time, being made out of foam, it will maintain it's physical structure for quite a long time hence giving you quite a good musical experience at all times.

PROS

  • 1
    Comes in a dual 2-ohm configuration for the best power utilization
  • 2
    Advanced cooling air flow design to keep the internal components cool.
  • 3
    30-300 Hz frequency response for a high-quality bass

CONS

  • check
    It’s got an awful smell which, however, fades off with time

QUESTION ANSWER FAQ

Q: can it be run on a receiver directly?

A: no, you will need a box and an amp to get it going

Q: does the smell it comes with go away?

A: yes, once the glue burns off the voice coils

Q: does this sub come with a warranty?

A: yes, you should be able to see the warranty information on their website

Lanzar Car Subwoofer DCT15D

Lanzar Car Subwoofer DCT15D

Durability = 80/100

Performance = 90/100

Installation = 70/100

The coil is a high-temperature coil and it's got a foam surround and a paper cone. With the RMS being 1000 watts and the diameter being 10.77 inches, it surely is the best 15 inch subwoofer.

Now here’s another one from Lanzar and I’ve got to say, as far as the best 15 inch subwoofers are concerned, this one’s got quite a lot to offer you than most in its class. From the design and build quality down to the tiniest detail of the performance, it surely will be worth every penny.

Here’s why it just might be the best for you…

1000-watt RMS and 2000-watt peak power

The power handling is just but one among many other striking features on this 15-inch subwoofer. Considering you’ll be getting as much as 1000 Watts for the RMS and 2000 watts for the peak. It will definitely be pumping out quite a loud bass.

As much as the power handling capacity is outstanding, the rule of thumb in this sub, just as it goes for any other subwoofer, is that you should strive to maintain the RMS range. This way, you’ll not risk blowing the voice coil or any sound lags or distortions.

Big foam surround

The power rating is not all that determines which the best 15 inch subwoofer really is, don’t you agree? Well in order to get the bass going well, there’s a huge foam surround included on this sub. Being made entirely out of foam, it surely is not short-handed on the durability.

Also, since this is a non-fatiguing foam suspension, it will keep the equipment safe as well. The overall diameter is 10.77 inches which will definitely be easy to set up.

A large 15” paper cone

In order to produce a superior audio quality, you’ll be working with a 15-inch non-pressed paper cone. Though the paper is not entirely the best for a subwoofer, this one will function just as it's meant to as far as ideal bass production is concerned

A durable aluminum voice coil

It's important that the voice coil be as good as possible, right? Being a dual 2.5" high-temperature aluminum voice coil, you'll not have to worry about it being damaged by high temperatures.

Taking into account the power handling configuration coming with this subwoofer, the aluminum voice coil will come in handy, don’t you agree?

26 – 1.5kHz for the frequency response

Besides just the power rating and the build quality, it’s important to know how well a bass your subwoofer can actually produce and there’s no other better way to do this other than the frequency response.

The trick is normally to pay attention to the lower end of the scale in which case we’ll be having 26 Hz on the DCT15D which means the bass will be deep and clear. With the high end being a maximum of 15kHz, the midbass frequency will also be outstanding.

PROS

  • 1
    5.47” mounting depth for easy installation
  • 2
    A big foam surround for quality bass production
  • 3
    It’s got a high temp aluminum voice coil that will resist corrosion as well

CONS

  • check
    It’s good for a boomy bass but not perfect for vocals

QUESTION ANSWER FAQ

Q: can I use it on a stereo?

A:yes but only if there’s a separate subwoofer jack or an external speaker

Q: how much airspace in a ported box will it need?

A: 16”deep should be enough

Q: how many subwoofers do I get?

A: you’ll be getting only one

Skar Audio VVX-15

Skar Audio VVX-15

Build quality = 70/100

User-friendly = 80/100

Performance = 80/100

The power rating and the impedance are outstanding, it's got the push terminals on one side for easy installation and it does have high-quality cone and surround construction

We’re finally at the end of our review and we’ve got the Skar Audio VVX-15 which will definitely not disappoint you. Let’s get started by taking a look at how good the power rating is.

600-watt RMS and 1200 watts peak power

With the continuous power being 600 watts and the peak power being 1200 watts, the music experience that comes with this subwoofer will blow your mind.

As much as the peak is quite high, you should observe the RMS range to avoid blowing it up. The low-end bass production will be both responsive and accurate.

Competition grade paper cone & foam surround

For the material construction, you’ll be getting a paper cone and a foam surround. The paper cone is lightweight and rigid enough for the production of a quality bass. As for the surround, the fact that its foam means that you'll not only have a large surface area for utmost bass dissipation but it is also renowned for maintaining its original form for a long time.

With both the cone and the surround working hand in hand, you’ll simply get the best.

The dual 4-ohm coil configuration

The lower the impedance rating on a subwoofer, the better of the performance is. Being a dual 4-ohm coil, you can wire it up to end up with either 8 ohms or 2 ohms based on your connection and preference.

It will also be able to utilize the power optimally to get the bass loud and low just the way you like it.

Easy installation

Even with the best features, a subwoofer won’t be any good if you can’t have it in place without much of a fuss. With the presence of four push terminals all of which are located on one side of the woofer, it will be easy to set it up in place easily

PROS

  • 1
    A 2.5” high temp copper voice coil for
  • 2
    600-watt RMS should be enough for quality bass production
  • 3
    Comes with 4 push terminals on one side for easy installation

CONS

  • check
    Be sure to inspect your package well for any flaws once you get it for the best result

QUESTION ANSWER FAQ

Q: is it a pair?

A: no, it isn’t

Q: will a sealed enclosure be okay to use?

A: this depends on how many watts you’re feeding it

Q: what is the mounting depth?

A: 9 ½ inches should be fine.

Final verdict.

So, here’s a rundown of the best 15 inch subwoofers you can purchase at the moment. It’s all about getting what you really need but not about the price. Whereas you may be forced to spend a lot of cash on some, you will only spend half as much on others.


The brand name is also something worth taking a closer look at. Some of the best brands such as kicker and Rockford will definitely come at a slightly steeper price. In a nutshell, there’s so much you will have to look into in order to end up with the best and there’s a lot more to consider than just the price and the brand. Simply take your time and you won’t be disappointed.

Best 12 inch Subwoofers- durability & Performance all in one

How far are you willing to go to get your car to its best possible state as far as the audio components are concerned? It's quite sad that most people will choose to simply settle for the factory installed sound system whereas they could tune up their car to a whole new level.

One of the areas where most people go wrong as they strive to get good music is one the subwoofers. What if I told you that by the time we’re done, you’ll have 10 of the best 12inch subwoofers at your disposal? Yes, that’s right, in this section, we’ll be taking a look at some of the best subwoofers of 2018.

Each of these is guaranteed to give you a kick for your buck and with our buying guide on how to choose the best subwoofer, you’ll have utmost knowledge of what to look into.

Enough with the introductions already. How about we move on to the main agenda, let’s get started with our review, shall we?

3 of our Recommended Picks.

You could have a look at our top 3 picks rather than having to read all through our review. I have to say, these three are literally the best of the best you could get in the market.

Product Image

Key Features

Pioneer TS-W3003D4

Pioneer TS-W3003D4

  • check
    Pioneer 12" woofer that needs .85 to 1.75 cuft to work
  • check
    2000w 12" woofer
  • check
    Dual 4 ff Voice Coils
Rockford Fosgate P2D2-12 Punch P2

Rockford Fosgate P2D2

  • check
    Dual linear spider with embedded 16 AWG tinsel leads
  • check
    Custom 10-AWG nickel plated push terminals
  • check
    12-inch, dual 2-ohm subwoofer with 800 watts
Pioneer TSW126M 12" Subwoofer with IMPP Cone

Pioneer TSW126M 12" Subwoofer with IMPP Cone

  • check
    1300 watts Max power
  • check
    New Voice Coil Cooling System (VCCS)
  • check
    IMPP cone produces tight and accurate bass

Read Our Expert Buying Guide : 

How To Buy Best Subwoofers Online

Cleck Here

Top 10 Best 12 inch Subwoofers 

Planet Audio AC12D 1800 Watt

Planet Audio AC12D 1800 Watt

Performance = 80/100

Durability = 80/100

User-friendly = 80/100

It’s got a customizable trim ring for a perfect fit and both the cone; the voice coil and the surround are built to last. The impedance, sensitivity and power rating altogether will give a quality sound.

Kicking off our review is the Planet Audio AC12D. if you’re about getting a kick for your buck, then this subwoofer may just be what you’re looking for. It’s got a little bit of everything to offer.

A polypropylene cone and foam surround.

For the construction, you’ll be getting a polypropylene cone that’s one of the most reputed when it comes to the manufacture of car speakers and subwoofers.Due to its light weight and rigidity, it is able to give out quite a high-quality bass.

With foam for the surround, there will be outstanding flexibility and in addition to this, foam I renowned for being able to maintain its original form over a long span of time.

88dB sensitivity.

When it comes to getting the loudest sound and using up less power, the 88dB sensitivity ought to do this perfectly. Despite the subwoofer having quite a high-power rating, the sensitivity allows you to use just enough for the production of a loud and clear bass.

4-ohm impedance.

For maximum power utilization, this sub comes with a 4-ohm impedance which. In addition to having a low impedance rating, the resonating frequency is as low as 32Hz. With the two of these, working hand in hand you’ll definitely be getting a loud and low bass.

PROS

  • check
    With the low resonating frequency, the bass will be quite low.
  • check
    Quality construction for both a quality sound and utmost durability.
  • check
    A high sensitivity rating for a loud and clear bass.

CONS

  • check
    Go slow on the power; anything above the recommended rating could blow the speaker

QUESTION ANSWER FAQ

Q: does it come in a pair?

A: no, you’ll be getting just one of these

Q:does it come with dual voice coils?

A: yes, it does come with dual voice coils

Q: which enclosure should I use for this subwoofer?

A: depending on what you like, it would do well with any enclosure

Car Subwoofer | BOSS Audio CXX12 1000 Watt, 12 Inch, 4 Ohm Voice Coil

BOSS Audio CXX12 1000 Watt

Build quality = 80/100

The fit = 60/100

Performance = 80/100

The sub can take a large amount of power and more so, the cone and surround build quality is outstanding but on the downside, it’s quite large and could prove difficult to have in place.

I’ve got to say, this subwoofer is not just about the size, it’s got a lot more to offer than other subs in its class will even get close to. Let’s see whether or not it’s worth every penny, shall we?

32Hz resonating frequency.

It’s all about having a loud and low bass. By having the resonating frequency as low as 32 Hz, you’ll definitely be enjoying this.

Something else that’s worth pointing out is that the sensitivity is an outstanding 85dB. Even though it’s not the highest you could get from a subwoofer, it’s enough to get the volume going loud at low power.

Rubber surround

For the surround, you'll be getting both a durable and high-performing butyl rubber surround. This just so happens to be one of the most flexible you could get on both a speaker or a subwoofer.

Polypropylene Cone

With polypropylene for the cone, the bass will definitely be clear and simultaneously loud enough. All this is due to the rigid and lightweight nature of polypropylene. In addition to delivering an outstanding bass, it is also quite durable.

An aluminum voice coil.

For the sake of both performance and durability, the voice coil included in the BOSS Audio CXX12 is a lightweight and soft hence qualifies as one of the ideal materials to use in a car subwoofer.

PROS

  • check
    4-ohm voice coil for optimal power usage
  • check
    A high 85dB sensitivity for a loud and clear bass.
  • check
    Durable construction for both the cone and the surround

CONS

  • check
    It may easily blow if you exceed the recommended power rating

QUESTION ANSWER FAQ

Q: how much does it weigh?

A: the shipping weight is around 5 pounds

Q: can it be able to work at 1 ohm?

A:yes, it can

Q:can it be run without a box?

A:yes it can

Rockford Fosgate P2D2-12 Punch P2

Rockford Fosgate P2D2-12

Quality = 80/100

Durability = 80/100

The fit = 80/100

The flex fit basket will offer a perfect fit. The cone and the surround are above average and the voice coil is designed to withstand high temperatures.

Besides having an outstanding RMS of 400 watts and a peak power voltage of 800 watts both of which will allow you to get a punchy bass, let’s take a look at what more this sub has to offer.

Dual 2-ohm impedance.

Since it’s all about getting the bass as low and loud as possible, you’ll be having a dual 2-ohm impedance on the Rockford Fosgate P2D2. The 2 ohms alone should be enough for you to channel as much power as possible.

In addition to this, the subwoofer has got a dual voice coil that enables you to wire up the sub as you desire for the production of a high-quality bass.

A high temp voice coil.

Since it’s got such a high-power rating, the Rockford Fosgate P2D2 has been constructed with a high-temperature voice coil within it.

This makes it possible for it to take in a low of power without blowing up the subwoofer

Kevlar fiber reinforced paper cone.

Being one of the things that determine how good a sound quality you'll be getting, it's important to pay really close attention to the cone.

Though it’s just a paper cone, it is reinforced with Kevlar fiber which greatly boosts the durability and at the same time does not compromise the sound quality you will have.

StampCast basket with an integrated spider venting

Besides just having a high temp voice coil, this subwoofer will come with an integrated spider venting which keeps the motor cool.

There is also a StampedCast basked that adds on to the strength for holding everything in place

PROS

  • check
    Has got a poly-foam surround- both durable and flexible
  • check
    A high temp voice coil that’s ensures the bass is loud and keeps the sub up and running simultaneously.
  • check
    Flex fit basket for a perfect fit when mounted.

CONS

  • check
    Supply the wrong amount of power and that’s it, you may have to get a new one

QUESTION ANSWER FAQ

Q: how good is the bass on this generally?

A: you’ll be getting a super crisp and clear bass

Q: can they be able to handle a 3000W class D monoblock amplifier?

A:yes, they can handle it.

Q: which hits harder between 4 ohms and 2 ohms?

A: 2 ohms will definitely hit harder.

Pioneer TS-W3003D4 Champion Series Pro Subwoofer

Pioneer TS-W3003D4 Champion Series Pro Subwoofer

User-friendly = 60/100

Performance = 90/100

Durability = 80/100

It’s built to take quite a lot of power and with an IMPP cone. It's bound to last and simultaneously give a good sound. If you'd like to have it in an enclosure, however, you should go for a large one.

Pioneer is one of the brands that has been around longest as far as car subwoofers are concerned. We, therefore cannot expect anything less than an outstanding performance from the Pioneer TS-W3003D4. Let’s see what it’s got in store for us.

Has got a dual 4-ohm ff voice coil

One of the features that dictate how good the bass will be is the voice coil. Even with the 4-ohm impedance alone, the Pioneer TS-W3003D4 should be able to pump quite a substantial amount of bass.

In this case, however, you'll be getting a dual 4-ohm voice coil which can be wired up differently in order to have even a lower impedance.

Power handling

Yet another feature that greatly contributes to the bass quality is the power handling capability. By having an RMS of 600 watts and a peak power rating of an outstanding 2000 watts, you’ll definitely be getting a window-rattling bass which is something only a few people dream of.

Product dimensions.

For the measurements, this subwoofers measures 12 x 12 x 6.9 inches. Since it packs a low of power, it also does come along with a lot of weight which is 14.4 pounds.

For the fit, you should ensure that you get this right before making your purchase.

PROS

  • check
    A dual voice coil for maximum power utilization.
  • check
    4-ohm impedance ensures that you get to use just the right amount of power for an outstanding bass production.
  • check
    Has quite an ideal power rating- 600-watt RMS and 2000 watts for the peak

CONS

  • check
    To have the perfect fit, ensure you take your measurements carefully and compare them against this subwoofer’s dimensions

QUESTION ANSWER FAQ

Q: what is the mounting depth for this subwoofer?

A: 6.9 inches

Q: how’s the bass on this

A:it’s basically one of the best 12 inch subwoofers; handles the lows very well and can also handle the highs

Q:doe the package has one subwoofer or two?

A: you’ll be getting only one

2) NEW Kenwood KFC-W3016PS 12" 4000 WATT Car Audio Subwoofers

Kenwood KFC-W3016PS

Performance = 90/100

User-friendly = 60/100

Durability = 70/100

Though it may take some time for it to break in, it will handle more power than most and the with thermal durability it’s definitely built to last.

We’re already nearly halfway done with our review and we’re doing good so far. Coming up 5th in our best 12 inch subwoofers review is the 2) NEW Kenwood KFC-W3016PS. One of the most outstanding things about this product is that you'll be getting a pair which is clearly not a deal you'd stumble upon every day.

Here’s all you’ll be getting from it.

Low-frequency output

An outstanding bass is all about getting a low frequency. In order to ensure that this is possible for each sub in this pair, you'll be having an increased cone area and at the same time, the cutout diameter is not altered.

This is a design unlike any other you’ll be getting on a subwoofer hence you get to enjoy every dime you spend on the pair.

Thermal durability

Enjoying the loud and low bass that this pair delivers is what you’ll want, right? So as to ensure they don’t blow when powered up or that you won’t have to put up with a distorted sound, the pair has been constructed with a thermal efficient system.

This also makes it possible for you to get a smooth and strong bass.

4-ohm impedance

For the impedance, you’ll be getting 4 ohms from each of these. The rule of thumb when it comes to the impedance is that the lower you have it, the better off you are since the subwoofer will be able to utilize the power that’s supplied to it to the maximum and give out an outstanding bass.

PROS

  • check
    4-ohm impedance for maximum power utilization
  • check
    Has got a low-frequency output for the best bass quality
  • check
    Its design allows it to keep cool at all times

CONS

  • check
    Though they work well without an enclosure, they’d reach their full potential with a ported enclosure

QUESTION ANSWER FAQ

Frequently asked questions

Q: can I reverse these subwoofers?

A: yes you can reverse mount these subwoofers and the same goes for any subwoofer in the market

Q: which enclosure would work best with these subs?

A:a ported enclosure should perform better

Q: are they shallow?

A: yes, they are

Pioneer TSW126M 12" Subwoofer with IMPP Cone

Pioneer TSW126M

Durability = 80/100

Power handling = 70/100

Performance = 80/100

Though it’s not the highest, the 350-watt RMS should give a good bass. The coil is designed to last and the same goes for the cone as well which will deliver a tight and accurate bass

We’re already halfway done but we still have got more subwoofers to look at. Let’s take a look at what the Pioneer TSW126M has in store for us, shall we?

The power handling.

Being one of the aspects that dictates how good a bass is on a subwoofer, the power handling of this sub is one of its strongest areas.

The nominal wattage or rather the continuous power handling is an outstanding 350 watts. This alone should be enough to ensure the bass is low and loud. For the maximum power handling, it packs an outstanding 1300 watts though it’s highly recommended that you maintain the power range between 100 watts and 300 watts to avoid any sound lags, distortions or blowing the sub

Quality construction

With an IMPP cone, the Pioneer TSW126M will give a tight and accurate bass. All this is credited to nothing else other than the fact that IMPP is one of the most rigid and lightweight materials you could use on a speaker or subwoofer cone.

A high-quality voice coil design

It is always important to keep the voice coil as cool as possible especially when you want to get a high-quality bass. Since we're dealing with subwoofers and its all about the bass, the power supplied to the voice coil will be way more than what you'll get on an ordinary speaker. 

With the new voice coil cooling system on this sub, the voice coil will be able to handle a high power rating hence all you'll be getting is a loud and low-frequency bass.

PROS

  • check
    Specially designed voice coil to handle high power levels.
  • check
    An IMPP cone for both a tight and accurate bass
  • check
    The high power rating will be enough to give out a high-quality bass

CONS

  • check
    It’s not guaranteed that this will be a perfect fit hence you’ve got to be keen on the measurements before making your purchase.

QUESTION ANSWER FAQ

Q: does it work well with a sealed or a ported box?

A: it is entirely a matter of personal preference. Depending on what you like, you could go for a sealed box for a tighter bass and a ported one for a louder bass

Q: what is the impedance rating on this sub?

A: it’s a 4-ohm subwoofer

Q:is it a shallow mount sub?

A: no, but it is short enough to fit into some shallow mount applications

BOSS Audio AR12D 2400 Watt, 12 Inch, Dual 4 Ohm Voice Coil Car Subwoofer

BOSS Audio AR12D 2400 Watt

Durability = 80/100

Performance = 80/100

User-friendly = 70/100

It's not hard to get an enclosure for this and the fit is perfect for almost any vehicle. Both the cone and the surround are durable and coupled up with the power rating, the impedance, and the frequency response, it's bound to give an outstanding sound

Yet another outstanding subwoofer from BOSS Audio, we’ve got the BOSS Audio AR12D. With the much that this subwoofer packs under the hood, it is definitely going to give you the biggest bang for your buck. Let’s have a look at what it’s got in store for us, shall we?

4-ohm voice coil

Starting with the voice coil, you’ll be getting a 2” 4-ohm dual voice coil. The same is also made of copper. Being a dual 4-ohm coil, you could wire it up differently as per the wiring in your vehicle to get the most out of it.

Being a copper coil, it will take a reasonably high amount of power before it blows or gives out a distorted bass which is clearly something nobody would want to deal with.

28Hz for the resonating frequency.

Since it’s all about getting the bass going low and loud as possible, the BOSS Audio AR12D has got a resonating frequency of as low as 28Hz. As compared to other subs in its class, it outdoes the rest by far.

85dB sensitivity rating.

So as to give you a loud bass at the lowest frequency and at the same time only get to use a fairly low amount of power, the sensitivity rating on this subwoofer is 85dB.

Working hand in hand with the dual 4-ohm voice coil and with the quality construction for the cone and the surround, you can depend on this for a decent bass quality.

Quality material construction

The cone is poly injected and considering it’s got polyurethane in it which is lightweight, rigid and at the same time durable, you’ll be getting a high-quality sound for quite a long time.

The surround is a butyl rubber surround. This is reputed for its resistance to chemicals, impermeability to air and can resist almost any extreme weather condition. Above all else, it is one of the most flexible hence can be relied on in delivering a high-quality bass.

PROS

  • check
    A dual 4-ohm impedance guarantees optimal power utilization and can be connected as you prefer as well.
  • check
    With the resonating frequency being as low as 28Hz the bass can get quite low and deep.
  • check
    The quality material construction guarantees a good sound quality and is simultaneously durable than most subs in its class

CONS

  • check
    To prevent failure, break the speakers in for a few hours before you go all the way on the bass

QUESTION ANSWER FAQ

Q: what is the mounting depth on this?

A: it’s 8 inches

Q: what is the frequency response for this sub?

A: should range somewhere between 35Hz and 400Hz

Q: can this be installed in a box for an AV receiver?

A: yes, this could work

Pioneer TSW311D4 12- Inch. 1400 Watt Dual Voice Coil DVC Subwoofer

Pioneer TSW311D4

Build quality = 90/100

Durability = 80/100

Performance = 80/100

It’s got an IMPP cone, an outstanding power handling as well as a dual 4-ohm impedance. The surround is an elastic polymer for the best bass and with a 95dB sensitivity, you’ll get the bass loud and low.

Now here’s another outstanding sub from pioneer. For starters, the design and build quality of this subwoofer is just one of the best. The cone for starters is an IMPP composite cone which is meant to give you a durable cone structure and at the same time give a powerful and accurate bass.

The subwoofer also gives a single piece cone and a drive cone; there is also a lightweight and rigid dust cap added on to it which ends up giving the cone utmost rigidity. The lightweight and durable nature of the cone allows it to withstand even the highest pressure without failure.

A new spider assembly.

Rather than assembling the spider directly into the basket, the design you’ll be getting on this cone is assembled onto the spider holder.

This greatly prevents additional vibrations since the cone as well is assembled onto the basket. With the independent design of the spder holder, the vibrations coming from the cone are minimized. At the end of the day, you’ll be getting an improved playback response, sound outline as well as higher linearity.

Cooling and ventilation.

Besides just the heat the speaker will be getting from the power it is supplied with, the fast-moving parts will generate a lot of friction hence the production of a lot of heat. This, in turn, leads to unwanted audio results.

With the ventilation design of the Pioneer TSW311D4, there is an improved air flow system that releases the heat and keeps the piston cool for better performance.

Power handling.

Just like other pioneer products, this one too does pack a lot of power. With as much as 400 watts for the RMS with each coil having an outstanding wattage rating of 200 watts, it sure is bound to give you the biggest bang for your buck.

Besides the RMS, you’ll also be having the peak power which is an outstanding 1,400 watts. This sub can hardly be compared with most you’ll get in the market today.

The frequency response

Though most people tend to overlook the significance of the frequency response, it’s actually one of the most important aspects to take into account.

With the range being between 20 and 125Hz, you’ll definitely be enjoying a low bass and a little bit of the mid-bass frequency.

Also, the fact that it comes with a sensitivity rating of an outstanding 95dB allows the bass to be loud and low and at the same time, you get to use a little bit of power.

PROS

  • check
    20-125Hz frequency response for a loud and low bass.
  • check
    The venting keeps the subwoofer components cool for a clear bass.
  • check
    With the high sensitivity, you’ll be using less power for a loud and clear sound

CONS

  • check
    Like most subwoofers, you should observe the power rating on this one. You may also have to break it in before going all the way on the sound

QUESTION ANSWER FAQ

Q: can I run one at a 1500-watt amp?

A: this may be a little too much since the RMS is 400 watts

Q: do I get one or two of these?

A: only one

Q: does it have a hard thump and a clear response?

A: yes, it does

Rockford Fosgate P3D4-12 Punch P3

Rockford Fosgate P3D4

Build quality = 80/100

Performance = 80/100

The fit = 80/100

Has got a flex fit basket for a perfect fit. The power rating and impedance are outstanding. The voice coil is a high temp for maximum durability.

Rockford is renowned for giving us some of the best car audio components. Well, let’s find out whether this one is really worth being among our best 12 inch subwoofers review, shall we?

VAST vertical attached surround

In order to increase the cone area, the subwoofer’s surround is constructed with the vertical attach surround technique. This ensures that you get an outstanding bass and simultaneously does not make installation a problem.

Flex fit basket design

To give you a perfect fit in most applications, the basket has got the flex fit design hence it won’t be that much of a fuss to have it in place.

A thermal anodized aluminum cone

In order to properly dissipate the heat build-up from both friction and the power supplied to it, there is an aluminum voice coil included. At the same time, you’ll be getting a clear sound and it won’t threaten to give in even at high pressure.

High temp voice coil

In order to ensure that you get to enjoy the subwoofer’s operation for the longest possible time, there is a high temp voice coil included within it.

Even at the 600-watt RMS, this high temp coil will stand up quite well.

PROS

  • check
    VAST surround for an increased cone area
  • check
    The high temp voice coil makes it ideal for handling high amounts of power.
  • check
    With the flex fit basket design, it will have a perfect fit for most applications

CONS

  • check
    To avoid blowing it up, break in the sub for a few hours then you can go high on the volume.

QUESTION ANSWER FAQ

Q: which amp is ideal for running two of these?

A:a 1000 watt amp at 2 ohms should do the trick.

Q: which enclosure would go well with these?

A: a ported one should work

Q: do I get a pair of these?

A: no, you’ll only be getting one of these.

Skar Audio EVL-12 D2 12" 2500 Watt Max Power Dual 2 Ohm Car Subwoofer

Skar Audio EVL-12 D4 12

Performance = 90/100

Durability = 80/100

Build quality = 80/100

It's got an advanced airflow cooling design and a double stacked magnet. It’s also a dual 2-ohm sub with a 120-watt RMS- guaranteed to give a window-rattling bass.

The final item among our best 12 inch subwoofers is the Skar Audio EVL-12 D2. Skar Audio is one of the best as far as giving you the best. Let’ what qualifies it among one of 2018’s best 12 inch subwoofers.

Dual 2-ohm configuration

With the 2-ohm configuration, this sub will be able to take in quite a substantial amount of power. The fact that it is a dual voice coil makes it possible for you to connect it differently and even better, you can get a 1-ohm impedance from this as well.

Power handling

With an outstanding 1250 watts for the RMS and double this for the peak, the subwoofer qualifies as an audiophile-grade sub. With the advanced cooling air flow system, you won't have to worry about the sub getting damaged by the high temperatures.

The 4-layer black aluminum ccaw voice coil allows for extreme power handling even for extended periods of time.

30-300Hz frequency response

It’s all about getting the bass real low and real loud. So as to make this possible, the frequency response ranges between 30 and 300Hz.

You’ll be able to enjoy both a deep booming bass as well as the midbass frequencies.

PROS

  • check
    1250-watt RMS rating will definitely give a loud window-rattling bass.
  • check
    30-300Hz frequency response guarantees a low and loud bass.
  • check
    Advanced cooling air flow design prevents damage even at a high power rating

CONS

  • check
    The smell it's got out of the box with may take sometime to fade off

QUESTION ANSWER FAQ

Q: can it be run from the receiver

A: no, it can’t

Q: does the smell really wear off?

A: yes, though it may take some time

Q: can they be used on the doors?

A: no, they are subwoofers, you may need an enclosure, however.

Final verdict

Coming to the end of ourbest 12 inch subwoofers review, getting the best 12 inch subwoofer shouldn’t be a problem right now. There’s also a buying guide on how to get the best subwoofer which should let you in on everything you need to know about getting what you need.


We’ve got everything for everyone. Whether you’re on a budget or whether you want a 12 inch sub that will give you a window-rattling bass, you can always rely on us.


All in all, just as it is the case for any audio components, you ought to take your time when shopping for one if you really do want the best.

Best 8-Inch Subwoofers- 2018’s Finest Picks

When you hear of subwoofers the next thing to automatically come to mind is a bass like no other; probably a deep and window-rattling bass. Well, as much as it is fair enough to say this, there’s actually more to a subwoofer than you think.

First of all, starting with the size, the best 8-inch subwoofers will give a different bass from say a 6-inch subwoofer. At the same time, you need to look at a lot more such as the frequency response, the power handling, the sensitivity etc.

What if I told you that by the time we’re done, you’ll have utmost knowledge of how to go about when it comes to selecting the best 8-inch subwoofers. Even better, you’ll have 10 of the best in 2018 to choose from each of which will give you a kick for your buck.

Well, enough with the introductions, how about we delve into today’s main agenda right away?

Our top 3 picks.

Why go through the trouble of having to read all through before settling on your pick? Go ahead and have a quick look at our comparison of the top three among our top 10- simply the best of the best

Product Image

Key Features

Rockford Fosgate P3SD2-8 8" Dual 2-Ohm Punch Series Shallow Mount Car Subwoofer

Rockford Fosgate P3SD2-8 8" Dual 2-Ohm Punch Series Shallow Mount Car Subwoofer

  • check
    8" Dual 2-Ohm Punch Series Shallow Mount Car Subwoofer
  • check
    Power Handling: Peak: 300 watts / RMS: 150 watts
  • check
    Frequency response: 38-250 Hz
Skar Audio ZVX-8 D4 Dual 4 Ω SPL Subwoofer 900W RMS

Skar Audio ZVX-8 D4 Dual 4 Ω SPL Subwoofer 900W RMS

  • check
    8" SPL 900 watt RMS power subwoofer, 25" high temperature voice coil
  • check
    Massive triple stack motor
  • check
    Dual 4 ohm voice coil configuration
CT Sounds Meso 8 Inch Car Subwoofer 800w RMS Dual 4 Ohm

CT Sounds Meso 8 Inch Car Subwoofer 800w RMS Dual 4 Ohm

  • check
    Double stitched treated paper cone
  • check
    2.5" Dual voice coil
  • check
    Mounting depth 6.6"

Best 8-inch subwoofers- only choose from 10 of the best

You know what you ought to look into if you want the best, right? Now it's time we take a look at the top 10 in 2018. In this product listing, you'll be taking not only a look at the review but also the strong points, the weak points as well as the FAQs on each product.

Let’s get started with the product listing, shall we?

Car Subwoofer | BOSS Audio CXX8

BOSS Audio CXX8

Though the resonating frequency is a little bit high, it’s got a butyl rubber surround, a polypropylene cone and a 3-25/32 mounting depth that’ll fit in most vehicles.

Starting us off on our review is the BOSS Audio CXX8. I have to say, if you’re really out to get the best 8-inch subwoofers, this one might just be what you’re looking for. Let’s take a look at what it packs under the hood, shall we?

The material construction.

Being one of the things that dictate how good the bass from your subwoofer will be, it’s important that you pay attention to both the cone and the surround on your sub.

For the cone, you’ll be getting a polypropylene cone. This is recommended for use in a subwoofer owing to the fact that it is both lightweight and rigid. This, in turn, gives it a high level of sensitivity to the motion of the voice coil which delivers both a loud and clear bass.

As for the surround, you'll be getting a rubber surround which is renowned for its high level of flexibility and more so, it does stand up quite well to extreme temperatures as well as moisture.

A 2-inch aluminum voice coil

When it comes to handling high levels of power, an aluminum voice coil might just do the trick considering it will stand up quite well to high temperatures. With this on the BOSS Audio CXX8, you’ll be able to play a loud, a low and a clear bass without worrying about damaging it.

PROS

  • 1
    Comes with a polypropylene- both lightweight and rigid for the best bass output
  • 2
    4-ohm voice coil for the highest power output.
  • 3
    The surround is made of rubber hence giving it utmost flexibility and durability

CONS

  • check
    Though it’s not the worst, the 83dB sensitivity is a little bit low

QUESTION ANSWER FAQ

Q: how much does the subwoofer weigh?

A: the shipping weight is about 5 pounds

Q: can it be able to work at 1 ohm?

A: yes it can but with the risk of blowing your sub

Q: how many am I going to get if I order one package?

A: a single subwoofer.

Planet Audio AC8D 1200 Watt, 8 Inch, Dual 4 Ohm Voice Coil Car Subwoofer

Planet Audio AC8D

The 4-inch mounting depth will fit in most vehicles. With the low 38Hz resonating frequency, you’ll definitely get that loud and low bass. The 85dB impedance and 4-ohm voice coil add on to the sound quality you’ll be getting.

If you’re looking for something that might just give you a window-rattling bass, this might just do the trick.From the sensitivity to the durable material construction, it’s definitely going to give you a kick for your buck.

4-ohm impedance

When it comes to the impedance, the rule of thumb is normally the lower the impedance rating, the better. Owing o the fact you’ll be having 4-Ohms on the Planet Audio AC8D, it will be able to optimally utilize the amount of power supplied to it in order to give you a loud and low bass.

The voice coil is a dual 2-inch aluminum coil which can be wired up differently to deliver an even better bass. Also, the fact that its aluminum allows it to tolerate high-temperature ratings.

A foam surround & a polypropylene cone

Though it’s not really the best, having a foam surround is beneficial provided you don’t expose it to moisture.

All in all, a foam surround is preferred to any other due to the capability of retaining its original state for quite a long time. It’s also fairly flexible and has got a large surface area which allows it to give out more bass

39Hz resonating frequency.

This simply makes the Planet Audio AC8D suitable for the reproduction of lower frequencies which in this case is what we want. Anything higher than this would’ve compromised on the bass quality which is yet another reason you should go for the Planet Audio AC8D.

85dB sensitivity.

In order to give you a loud and clear bass with a reasonably low amount of power, you’ll be getting 85dB on the sensitivity. Get your bass to where you want it and simultaneously worry less about using too much power.

PROS

  • 1
    A 29Hz resonating frequency for a high bass quality
  • 2
    Quality foam surround and polypropylene cone for the production of a high-quality bass.
  • 3
    With the 4-ohm impedance and a dual voice coil, you'll get to utilize as much power as possible.

CONS

  • check
    It’s not meant for every vehicle hence you should pay really close attention to the fit.

QUESTION ANSWER FAQ

Q: how much RMS does it run at?

A: 750 watts for the 8” sub

Q: does it have a dual voice coil?

A: yes, it’s got a dual voice coil.

Q: does the package come in a pair or a single sub?

A: it comes in a single unit.

Pyle PLPW8D 8-Inch 800 Watt Dual 4 Ohm Subwoofer

Pyle PLPW8D 8-Inch

It’s got a treated foam surround and a vented and bumped motor construction. The RMS is 400 watts and it’s got a dual 4-ohm impedance for maximum power utilization. It definitely is one of the best 8-inch subwoofers.

It’s all about getting to have the biggest value for your money, isn’t it? That being said, let’s have a look at whether or not the Pyle PLPW8D ha got what it takes, shall we?

Power rating

Being one of the most important things as far as the best 8-inch car subwoofers are concerned, this one has an outstanding RMS of 400 watts and 800 watts for the peak.

Sticking to the RMS should definitely be able to give you an audiophile-grade bass quality which is something only a few people dream of. Always be keen not to exceed the RMS since this could lead to the damaging of the voice coil

89dB sensitivity rating

In order to ensure that you’ll be getting both a loud and clear bass at louder volumes and at the same time get to use less power, it’s got a sensitivity of89dB. Working hand in hand with the RMS power, this level of sensitivity will definitely have the Pyle PLPW8D performing way better as compared to other subs in its class.

Dual 4-ohm impedance

For the impedance, you’ll be getting a dual 4-ohm impedance. The 4-Ohms alone should be enough to optimally utilize the power supplied to it without blowing the speaker or ending up with a distorted sound.

Being a dual voice coil, however, you can be able to wire the subwoofer up differently which will allow you to use up even more power. The same is also a 4-layer high-temperature voice coil which allows it to stand up quite well to large amounts of power.

PROS

  • 1
    89dB sensitivity- this allows it to make use of as much power as possible for the production of a loud and low bass.
  • 2
    High temp voice coil for both durability and high performance.
  • 3
    400-watt RMS and 800 watts for the peak for the best bass quality

CONS

  • check
    Always observe the power rating. You don’t want your subwoofer blowing up after a few weeks.

QUESTION ANSWER FAQ

Q: can I be able to use the sub with only one input?

A:yes, you can use it with one input

Q: which type of grill will work well with this subwoofer?

A: the regular type of grill ought to do the trick

Q: does the unit come in a pair?

A: no, you’ll only be getting one subwoofer.

Skar Audio VVX-8v3 D2 8" 800W Max Power Dual Voice Coil Subwoofer

Skar Audio ZVX-8

It’s got an outstanding 400 watts for the RMS, a butyl surround and there is a high temp voice coil and a highly efficient cooling design

Moving on with our review, we’ve got the Skar Audio VVX-8v3 D4 coming up 4th. As far as durability and quality sound is concerned, this subwoofer might just be what's missing.

Here’s what it packs under the hood.

400-watt RMS & 800W max power

Packing as much power as it does, you’ll definitely be able to get a deep and loud bass. This is clearly not as much as you would get from other subwoofers in its class.

2”high-temperature voice coils

Being one of the things that dictate whether or not you're working with the best 8-inch subwoofers, the coil ought to be one of the best.

This makes it one of the few subwoofers that will be able to utilize as much power as possible without having to worry about blowing the voice coil. Speaking of the voice coil, let’s have a look at yet another feature that makes this subwoofer worth the buck.

There is also a highly efficient cooling design which is yet another thing that reduces the odds of blowing the voice coil.

Dual 2-ohm voice coil

For the impedance, you’ll be getting a dual 2-ohm voice coil. Being a dual coil, it’s going to channel as much as it can from the 400-watt RMS.

The fact that it is a dual voice coil allows you to wire it up differently in such a way that you’ll be able to pump more bass as compared to what the 4ohms will give you.

PROS

  • 1
    High-temperature voice coil and a cooling design keep the sub from blowing up.
  • 2
    400-watt RMS and 800-watt peak power deliver both a loud and low bass.
  • 3
    Dual 2-ohm voice coil to the optimal power utilization

CONS

  • check
    Pay close attention to the dimensions especially the mounting depth, it won’t have a perfect fit in every vehicle

QUESTION ANSWER FAQ

Q: does it come in a pair

A: no, you’ll only be getting a single subwoofer

Q: will I be needing an enclosure for this sub?

A: depending on how you want it to sound, you may or may not need one

Q: can they be able to take 1500 watts at 1 ohm?

A: yes, they can handle this.

Rockford Fosgate P2D4-8 Punch P2 DVC

Rockford Fosgate P2D4-8

Comes with a flex-fit basket design, 250 watts for the RMS and has got both a high-quality cone and surround

We’re all about giving you the biggest kick for your buck. This subwoofer not only has a design that’s one of a kind but its level of performance is one of the best in its class.

2.25-inch copper clad aluminum voice coil

So as to ensure there’s maximum power utilization, the aluminum voice coil is clad with copper which qualifies it as a high temp voice coil.

Dual 4-ohm voice coil

Besides just being a high temp voice coil, the fact that it is a 4-ohm dual voice coil allows you to wire it up with respect to the set up in your car for optimal power utilization.

Kevlar fiber reinforced paper cone

For the cone, you’ll be getting one of the best- a Kevlar fiber reinforced paper cone. The Kevlar increases the rigidity of the paper cone and hence the transmission of a loud and quality bass

High-density poly-foam surround

For the surround, you’ll be getting a high-density foam. This has got a wide surface area for outstanding bass transmission and more so, it will be able to retain its original form over a long span of time.

PROS

  • 1
    High-temperature voice coil for optimal power output.
  • 2
    A high-density foam surround for quality bass production.
  • 3
    The dual 4-ohm voice coil allows for optimal power utilization

CONS

  • check
    N/A

QUESTION ANSWER FAQ

Q: can these work in free air?

A: no, these are best used with enclosures

Q: will it sound good on the rear deck?

A: yes, it will

Q: does it come with a warranty?

A: yes, it does come with a warranty.

Rockford P3SD48 P3 Punch Shallow mount 8-Inch DVC 4-Ohm Subwoofer

Rockford P3SD48

It’s got a dual voice coil with a Santoprene surround and a dust cap for the cone. The RMS and the peak are 150 watts and 300 watts respectively.

Yet another outstanding subwoofer from Rockford, we’ve got the Rockford P3SD48. As far as subwoofers go, I’d say that the P3SD48 has more to it than meets the eye. Let’ start by having a look at the cone, shall we?

An anodized aluminum cone.

It is important that the cone of a subwoofer be as rigid and lightweight as possible for the delivery of an outstanding bass. With aluminum, you'll be getting both of this which at the end of the day gives you an outstanding bass quality.

The fact that the aluminum cone is anodized improves it’s durability and contributes even a lot more to the rigidity.

M-Roll Santoprene surround

There is also an m-roll Santoprene surround is a meld of rubber and thermoplastic and besides just having a high level of flexibility, this surround will go for quite a long time without getting damaged.

StampCast basket with an integrated spider venting 

You will also be getting a StampCast basket that's got a spider venting integrated into it. The two of these will aid in both protecting the speaker and holding it in position perfectly.

Also…

For the power handling, you’ll be getting an RMS of 150 watts and a 300-watt peak voltage which in turn delivers quite a decent bass.

PROS

  • 1
    A durable and anodized aluminum cone for utmost durability and the best sound.
  • 2
    The Santoprene surround has optimal flexibility for a high-quality bass.
  • 3
    With the 150-watt RMS and 4-ohm impedance, the bass quality will simply be the best.

CONS

  • check
    Double check the dimensions to ensure you get a perfect fit

QUESTION ANSWER FAQ

Q: what is the wattage and peak of this speaker?

A: 150 watts on the RMS and 300 watts for the peak

Q: does it come in a pair?

A: no, just a single unit

Q: what are the dimensions of this sub?

A: the cutout diameter is 7.13 inches and the mounting depth is 2.66 inches

Rockford Fosgate P3SD2

Rockford Fosgate P3SD2-8

It’s a shallow mount sub with a 150watt RMS and a dual voice coil to ensure you get the most out of the RMS.

We are way past halfway on our review and we’re doing good so far. Comin up 7th is the Rockford FosgateP3SD2. Let’s have a look at what this 2-ohm subwoofer has in store for us, shall we?

The power handling

For the RMS, you’ll be getting as much as 150 watts and double this for the peak power. Coupled up with the 2-ohm impedance, your subwoofer will be able to reach its full potential.

Considering there is a dual voice coil on this subwoofer, you could get the most out of it if you wire it up correctly. The fact that it is a dual voice coil also allows you to set it up with respect to the connection you have in your vehicle.

38-250Hz frequency response

With as low as 38Hz, you'll ideally utilize the low-frequency bass and with a maximum of 250Hz, you will also be able to enjoy the mid-bass sounds.

Product dimensions

As for the measurements, it’s got a 2-11/16-inch mounting depth. The overall dimensions are 9.8 x 9.8 x 5.3 inches. Considering what you’ve got in your car, you should go ahead and consider how much changes you’re going to make before installing this unit, is it really worth the hassle?

PROS

  • 1
    It’s a shallow mount car subwoofer hence a perfect fit for most vehicles.
  • 2
    With the 2-ohm impedance, you’ll get the most out of the bass.
  • 3
    The frequency response is ideal for both the mid-bass as well as a loud and low bass.

CONS

  • check
    You might need an enclosure to get them to their full potential.

QUESTION ANSWER FAQ

Q: is it a pair or is it just a single sub?

A: it’s only a single subwoofer

Q: how’s the mid-bass on this subwoofer?

A: it’s pretty clear

Q: does it come with a grill cover?

A: yes, it does come with a grill cover

Skar Audio ZVX-8 D4 Dual 4 Ω SPL Subwoofer 900W RMS

Skar Audio ZVX-8

Can wire it up as you prefer to fully utilize as much as you want out of the 900-watt RMS. Though large, this sub is built to last and handle anything you throw at it.

Yet another subwoofer from Skar audio is the Skar Audio ZVX-8 D4. I’ve got to say, if you’re looking for something that will take almost anything you throw at it, then you should take a look at this one.

900-watt RMS

As compared to other subwoofers in its class, the 900-watts on this one will definitely be giving you a bang for your buck. As a matter of fact, it does stand out as the best choice for any audiophile. If you’re all about a window-rattling bass, then this is definitely what you should go for.

An advanced cooling system.

Regardless of the amount of power you throw at it, the ZVX-8 will stay at the best possible temperature to avoid blowing up; you, therefore, get to use it for the longest time possible.

Dual 4-ohm voice coil configuration

For the voice coil, the 4-ohms alone is enough to ensure you channel as much power as possible from the subwoofer.

With the dual configuration, you could wire it up as per the set up in your car’s interior to get the most out of it.

Also…

There is a 25” high temp voice coil that allows for high power handling and a triple stack motor that adds on the loud and low bass you’ll be getting.

PROS

  • 1
    A high-temperature voice coil for utmost durability.
  • 2
    The high-power rating ensures that you get a bass that’s way better as compared to other subs in its class.
  • 3
    Dual 4-ohm voice coil for optimal utilization of the 900-watt RMS.

CONS

  • check
    It’s a large sub and it’s best that you pay close attention to the dimensions before trying it out

QUESTION ANSWER FAQ

Q: what’s the mounting depth?

A: almost 12 inches

Q: will 2 ohms hit harder than the 4 ohms?

A: yes, the 2 ohms will do better

Q: which type of enclosure is best for this sub?

A: a ported enclosure should work well

CT Sounds Meso 8 Inch Car Subwoofer 800w RMS Dual 4 Ohm

CT Sounds Meso 8 Inch Car Subwoofer 800w

It's got one of the best magnets, an outstanding power rating and both the cone and the surround are designed to last and simultaneously perform amazingly well.

From the subwoofer’s name alone, you can definitely tell that it’s got so much to offer. The 800-watt RMS for starters will ensure that you get a window-rattling bass. As for the impedance, the fact that it’s got the Dual 4-Ohm voice coil qualifies it as one of the few that are above average.

A double stitched treated paper cone

For the material construction, the double stitched treated paper cone has got one of the best performances when it comes to the delivery of the bass.

Around the paper, the cone is a composite foam surround which is reputed for being able to maintain its original form for as long as possible and more so it’s also one of the best when it comes to flexibility.

The Y35 magnet

For the magnet, you’ll be getting one of the best grades- the Y35 triple stacked ferrite magnet which does play a big role when it comes to the bass output.

30.5Hz for the resonating frequency

The rule of thumb when it comes to this is that the lower it is, the better the quality of the subwoofer. With as low as 30.5Hz for this, you'll definitely be getting that loud and low bass most people only dream about.

PROS

  • 1
    A composite foam surround for utmost flexibility.
  • 2
    Has got a triple stacked Y35 ferrite magnet for the best bass production.
  • 3
    A quality paper cone that increases the subwoofer's longevity

CONS

  • check
    All you’ve got to worry about on these is the fit, otherwise, the performance is great.

QUESTION ANSWER FAQ

Q: which amp would work best with these?

A: a 1500-watt amp should work quite well

Q: does it come in a set of 2?

A: no, it’s only one subwoofer in the package

Q: do they come with the red or black coils?

A: they come in the red coils

Pyramid P/W848USX 8-Inch 350 Watt High Performance 8 Ohm Subwoofer

Pyramid PW848USX

This sub is designed to fit in most vehicles but at the same time, the performance is a little compromised due to the impedance. With the rubber surround and the strong paper cone, it ought to be worth the buck.

Coming up last on our review, we’ve got the Pyramid PW848USX. Let’s have a look at what it’s all about, shall we?

A non-fatigue rubber suspension.

For the best flex which in turn leads to an outstanding bass production, you’ll be getting a non-fatigue rubber suspension. In addition to this, there is also a black and strong non-compressed paper cone.

With the two of these working together, the sound quality will definitely be one of a kind.

Bumped and vented motor structure

In order to keep things cool, the motor structure is bumped and vented. This way, you’ll have to worry less about blowing up your subwoofer. Speaking of keeping things cool, let’s have a look at the voice coil next.

1.5” high temp voice coil

Being a 1.5” high temp voice coil, this sub has got high tolerance for high levels of power which means that no matter how much power it gets, it won’t easily give in due to the high temperatures.

Outstanding power handling and sensitivity

For the RMS, you’ll be getting 175 watts and the peak is double this. this ensures that you get a decent bass quality.

With the sensitivity being 87dB, the 8-ohm impedance is fairly compensated for to ensure that you get a loud and clear bass.

PROS

  • 1
    87dB sensitivity for the delivery of a loud and clear bass.
  • 2
    The bumped and vented motor structure keeps the sub as cool as possible to avoid its damage.
  • 3
    With the high temp voice coil, the sub can take in quite a substantial amount of power.

CONS

  • check
    Despite its strongholds, it’s a bit compromised on the impedance

QUESTION ANSWER FAQ

Q: what exactly is the ohm rating on this?

A: 8-ohms

Q: how many subwoofers will I be getting?

A: the package has got just one subwoofer

Q: what are the dimensions on this?

A:8.4 x 8.7 x 4.5 inches

Final verdict

We’ve taken a look at 10 of the best and with our buying guide of how to get the best subwoofer, all that’s left is for you to have your pick among our top 10. Going for exactly what you need is what getting the best is all about.
Even though you have the best, ensuring it stays up and running for as long as possible is another task. Observe the power rating and simultaneously avoid subjecting them to any potential physical damages such as extreme temperatures and moisture.
Exercise utmost patience in picking one out- you do deserve the best.

Best Alpine Subwoofer -5 of The Best Picks in 2018

My own personal opinion as far as car audio is concerned is that everyone needs to have a decent bass in their car. The truth here is that even though you may be getting this from your factory installed speakers, they are nothing compared to what you can get from installing a subwoofer in your vehicle.

The current subwoofer market is bloated with quite a lot of products which makes it somewhat difficult to get exactly what you need. Taking this into account, we’ve put hours of research into getting you a list of the best alpine subwoofers.

The Alpine brand has been around for quite some time and with the prowess used in the construction of their subwoofers, I’d say that they are definitely worth spending your cash on.

From the design quality and the aesthetics to the performance, each of the subwoofers we’ll be reviewing today is bound to blow your mind. That being said, let’s now move on to the main agenda; below is a review of 5 of the best alpine subwoofers you’ll get in 2018.

Top 5 Alpine Subwoofer

Product Image

Key Features

Alpine Swr-t10 10-Inch 1800 Watt 4 Ohm Shallow Mount Subwoofer

Alpine Swr-t10 10-Inch 1800 Watt 4 Ohm Shallow Mount Subwoofer

  • check
    10" Single 4 Ohm Type-R Shallow-Mount Subwoofer
  • check
    Injection Molded Santoprene rubber surround
  • check
    Neodymium 35SH magnet structure
Alpine SWR-12D2 Type-R 12 Subwoofer

Alpine SWR-12D2 Type-R 12" Subwoofer with Dual 2-ohm Voice Coils

  • check
    Peak: 3000 watts | RMS: 300-1000 watts | impedance: Dual 2 ohms
  • check
    Oversized 2.6", high-temperature, 4-layer Dual voice coil
  • check
    Top-mount depth: 6-3/8" | cutout diameter: 10-7/8" | frequency response: 26-300 Hz |
Two Alpine R-W10D2 R-Series 10-Inch Dual 2 Ohm Subwoofers bundle

Two Alpine R-W10D2 R-Series 10-Inch Dual 2 Ohm Subwoofers bundle

  • check
    Power Range: 300W-750W RMS. Power Handling: 750W RMS / 2250W Peak (per woofer).
  • check
    Parabolic Cone Structure with Pulp/Kevlar Cone & PP/Mica/Talc Dust Cap.
  • check
    High Amplitude Multi-Roll surrounds (HAMR)
Alpine SWR-12D4 Type-R 12-Inch 1000W Subwoofer with Dual 4-ohm Voice Coils

Alpine SWR-12D4 Type-R 12-Inch 1000W Subwoofer with Dual 4-ohm Voice Coils

  • check
    SWR-12D4 - Alpine 12" Dual 4-Ohm Type-R Series Subwoofer
  • check
    Top-mount depth: 6-3/8"
  • check
    Max RMS Power Capacity: 1000W, Peak Power Capacity: 3000W
Alpine SWA-12S4 BassLine Series 12" 4-ohm Subwoofer

Alpine SWA-12S4 BassLine Series 12" 4-ohm Subwoofer

  • check
    Max RMS Power Capacity: 350W
  • check
    Peak Power Capacity: 1000W
  • check
    Frequency Response: 30 Hz-200 Hz

1.Alpine Swr-t10 10-Inch 1800 Watt 4 Ohm Shallow Mount Subwoofer

Alpine Swr-t10 10-Inch 1800 Watt 4 Ohm Shallow Mount Subwoofer

To kick off our list, we have the Alpine Swr-t10. Considering the much that it has got in store for you, I’d say this is definitely a subwoofer that’s worth every penny.

Here is what it packs under the hood…

4-ohm impedance

Starting with the impedance rating. The Alpine Swr-t10 has got an outstanding 4 ohms. Normally, for both speakers and subwoofers, the lower the impedance rating is the better off you are. 4 ohms and below is normally the recommended amount of impedance if you are looking for an above-average subwoofer,

The reason for this is that it will be able to utilize as much power as possible which in turn allows for the production of a loud and clear bass without any risk of damaging the subwoofer.

An aluminum woofer cone

Other than the impedance of your subwoofer, something else that greatly contributes to how good the bass will be from your subs is the cone.

Provided the cone material is hard and rigid, you’re good to go which is why for this subwoofer, you’ll be getting an aluminum woofer cone. This just so happens to be one of the best due to its high sensitivity. It will be able to move the surround with even the slightest motion from the voice coil.

Injection molded Santoprene rubber surround.

Besides the cone, something else that you need to greatly take into consideration when shopping for a subwoofer is the surround. The more flexible it is, the better off you are.

In our case, the Santoprene rubber should do the trick and in addition to being flexible, rubber is also durable. It will be able to stand up quite well in extreme temperatures as well as moisture- you surely do deserve the best.

Thin design

This is probably one of the most eye-catching features of this subwoofer. Owing to the fact that it comes in a thin design, it will be easy to install in compact areas.

A vented voice coil heat sink.

Yet another construction feature that makes this one of the best in the market is the vented voice coil heat sink. One of the things that result in the damage of speakers is when the coil is exposed to more heat than it can handle. With the 1800 wattage on this sub, it'll surely need to get rid as much hear as possible.

Yet another thing that cools down the subwoofer is the airflow management that also reduces sound distortion.

2.Two Alpine R-W10D2 R-Series 10-Inch Dual 2 Ohm Subwoofers bundle

Two Alpine R-W10D2 R-Series 10-Inch Dual 2 Ohm Subwoofers bundle

Yet another one from the R-Series is this subwoofer bundle from alpine. Clearly, it's not every day you'll get a set of subwoofers to work with. That being said, let’s take a look at what this one has in store for us, shall we?

The power handling.

having had a huge experience with car subwoofers, I cannot emphasize enough on how important it is to ensure your sub has the best power handling.

For the continuous power, each subwoofer can run on a maximum of 750 watts and for the peak, each of them will be able to attain as much as 2250 watts. The RMS power range is between 300 watts and 750 watts which should definitely be more than enough to give you a window-rattling bass. As a matter of fact, the subwoofers may hardly need to get to the peak power.

A dual 2-ohm voice coil

Even though the power rating might be outstanding, it wouldn’t be any good to you if the impedance wasn’t the best.

Basically, anything below 4 ohms is worth your money. Considering you’ll be getting a dual 2-ohm voice coil on this sub, the amount of power with which the bass will be produced is going to be optimal.

The voice coil is a 65 mm coil that’s got a high temp 4-layer DVC winding. The fact that it’s a high temp coil ensures that it is able to take a huge load of power before getting damaged.

Being a dual voice coil allows you to wire it up in different ways which allow for the utilization of the maximum possible power that in turn gives you an outstanding bass.

Pulp/Kevlar cone design.

The cone is one of the most critical parts of a subwoofer. As stated earlier on, the best cone materials are normally constructed from lightweight and durable materials and Kevlar just so happens to be one of them- it’s rigid and lightweight. This is all you’ll be needing to get an outstanding bass.

Covering the cone is a PP/Mica/Talc dust cap which protects it from any foreign particles which could otherwise distort the bass quality.

Airflow management and heat transfer system

Yet another important thing to look into on a subwoofer is the physical design. This subwoofer bundle comes with an airflow-optimized dual flare pole vent. In addition to this, the whole system is an airflow management and heat transfer system which is another reason you should settle for this set.

3.Alpine SWR-12D2 Type-R 12" Subwoofer with Dual 2-ohm Voice Coils

Alpine SWR-12D2 Type-R 12 Subwoofer

Yet another one in the Type-R series is the Alpine SWR-12D2. I have to say, don’t underestimate this subwoofer due to its size, it’s got so much in store for you.

The power rating.

One of the things that caught my eye on this subwoofer is the capacity of power it packs. Having a peak power rating of as much as 3000 watts and a maximum RMS of between 300-1000 watts, it's something only a few people dream of and definitely worth every penny.

Other than the power rating, another striking feature on this subwoofer is the dual 2-ohm voice coil which we’ll look at in our next point.

A dual 2-ohm voice coil.

Anything below 4-ohms for the voice coil is something you should go for. Normally, the lower the impedance, the better off you are since the subwoofer gets to use more power.

Other than just having a 2-ohm voice coil, this sub has a dual voice coil which makes it even better since you can wire it up in different ways depending on your set up.

26-300 Hz frequency response.

Unlike the coaxial and component speakers, all you need on a good subwoofer is a low-frequency response rate that's going to only be dedicated to the bass.

Fir the SWR-12D2, the frequency response is between 26 Hz and 300Hz which should be enough to handle the deep window rattling bass as well as the mid-range frequency bass at a slightly higher frequency rating

84.7dB sensitivity.

The sensitivity is simply what determines how loud and clear your bass will be. For this subwoofer, you'll be getting this at 84.7dB. I have to say, this is one of the weak points on this sub but nonetheless, 84.7dB is far much better than what you'll get in most subs.

4.Alpine SWR-12D4 Type-R 12-Inch 1000W Subwoofer with Dual 4-ohm Voice Coils

Alpine SWR-12D4 Type-R 12-Inch 1000W Subwoofer with Dual 4-ohm Voice Coils

The second last item on our best alpine subwoofer review is the Alpine SWR-12D4. From the design to the performance, this subwoofer will undoubtedly be worth every penny.

Let’s see what it’s got in store for us, shall we?

The power rating

For the RMS and the peak power, you’ll be getting 1000 watts and 3000 watts respectively. The latter is clearly more than enough for the RMS and as a matter of fact, you’ll hardly need to attain the peak.

Just as it is the case with any speakers or subwoofers, it's always best not to exceed the RMS rating since this could easily damage your subwoofer's coil.

The impedance.

Another thing that makes this one of the best subwoofers is the 4-ohm impedance rating it’s got. The best rates subwoofers normally have a lower impedance rating that makes it possible for them to utilize as much power as possible.

Considering the coils on this one isa dual 4-ohm voice coil, you can wire them up differently to utilize even more power.

84dB sensitivity rating.

The better the bass is at a high volume the better off you are. The sensitivity is what determines this. I know what you’re thinking…” Maybe this is a little bit to low", right? Well, the truth is, the sensitivity is not the strongest point on this subwoofer but it definitely isn’t the weakest.

First off, it’s not too low to restrict you from playing at a loud and clear bass. Also, taking into account the power rating and impedance on this subwoofer, the slightly low sensitivity rating is highly compensated for.

Subwoofer dimension& weight

The top mounting depth of this 12-inch sub is 6-3/8 inches and it measures 12.6 x 6.4 x 7.5 inches. As for the weight, it weighs only 28 pounds which is quite light for a subwoofer in its class.

5.Alpine SWA-12S4 BassLine Series 12" 4-ohm Subwoofer

Alpine SWA-12S4 BassLine Series 12 4-ohm Subwoofer

Finalizing our best alpine subwoofer review is the amazing Alpine SWA-12S4from the Bassline series. Truth be told, both the design and the amount of power this subwoofer packs will definitely blow your mind.

Here’s what you’ll be getting…

The material construction

For the diaphragm, you’ll be getting a reinforced parabolic cone structure. The same is also constructed of a pulp-Kevlar blend which is both rigid and lightweight. This simply ensures that you get both a loud and clear bass.

Considering the cone structure is parabolic focuses all the sound frequencies at one focal point. If placed just in the right place, you’ll definitely have a better soundstage than what you would get from most subwoofers.

There is also a Poly-Mica dust cap covering the cone. This keeps the bass loud and clear at all times.

Power handling.

This, as emphasized earlier on in our review is something worth paying your attention to.

The RMS threshold is an outstanding 350 watts and the range is between 150 and 350 watts. This should definitely be enough to give you a punchy bass.For the peak power voltage, you’ll be getting as high as 1000W- undoubtedly more than you need for a window-rattling bass.

30Hz-200Hz frequency response

Getting a subwoofer is all about making the low frequencies more pronounced, right? Basically, the lower the frequency is the deeper the bass will be.

With as considering the lowest frequency the human ear can make out is 20HZ, the 30Hz frequency will give you quite a deep and loud bass. The upper limit of the Alpine SWA-12S4 frequency response is 200Hz- this ought to be enough to handle the mid-bass in your music quite well.

4-ohm impedance rating.

The rule of thumb when it comes to the impedance is that the lower it is the better off you are. With as low as 4 ohms on the Alpine SWA-12S4, you’ll be able to push more of the RMS; as a matter of fact, you can get as much as 320 watts.

Conclusion- Our Final Take.

Coming to an end of our best alpine subwoofer review, it’s clear that each of the 5 subs is worth every penny.

The Type-R series subwoofers have got it all from the built quality down to every construction detail. The dual subwoofers, on the other hand, will offer a bass most people only dream about. If you’ll want to get a sub that'll be amazingly easy to fit almost anywhere, then you should go for the SWR-t10- it's mounting depth is simply the best.

I could go on all day but the truth of the matter is that, for anyone who’s really willing to give their car the best, then I’d highly recommend the alpine subwoofers.

Best kicker subwoofers- only choose from the top 10 of 2018

As far as car audio is concerned, getting the best bass can make a huge difference in your audio system. As a matter of fact, I’d say that you owe it to your car to give it the best. Kicker subwoofers have come up quite well over the past few years.

With incremental improvements they have made on both the design quality as well as the performance over the years make them one of the best. due to this, I find it necessary to list down 10 of the best kicker subwoofers.

I have to say, no matter how good performing a subwoofer is, it surely will have a flaw in it- nothings perfect, we all know that. I’d like to think that it’s a matter of whether or not the good qualities outweigh the bad qualities.

That being said, how about we cut to the chase and move on to today’s main agenda right away? Here’s a complete in-depth review of 10 of the best kicker subwoofers.

Best kicker subwoofers

3 of our best kicker subwoofers

Rather than reading all through, why not take a quick look at 3 of our best picks?

Product Image

Key Features

Kicker CVR124 12 Dual 4 ohm CompVR Series Car Subwoofer

Kicker CVR124 12" Dual 4 ohm CompVR Series Car Subwoofer

  • check
    RMS power output (Watts): 400W
  • check
    Maximum power output (Watts): 800W
  • check
    Frequency response: 25-500 Hz
Kicker 10C124 Comp 12-Inch Subwoofer 4 SVC

Kicker 10C124 Comp 12-Inch Subwoofer 4 SVC (Black)

  • check
    World’s best subwoofer value, still under $100 Best-sounding, loudest bass for the buck
  • check
    Super-rigid, injection-molded cone with 360-degree back bracing - High-temp coil wire - Vented pole piece for heat dissipation
  • check
    Strong steel basket with coil-cooling perimeter venting Ribbed surround for strength at high excursion
Kicker 10 CVT10 2-Ohm 10 CompVT Subwoofer - 10CVT102

Kicker 10 CVT10 2-Ohm 10" CompVT Subwoofer - 10CVT102

  • check
    Shallow-mount, true high-performance woofer
  • check
    Delivers extreme bass with minimum depth
  • check
    2- or 4-Ohm four-layer voice coil for max power handling

The 10 Best Kicker Subwoofers

Now we describe top 10 subwoofers of kicker brand. Under bellow you can get the full review of top 10 products of kicker. 

1.Kicker CVR124 12" Dual 4 ohmCompVR Series Car Subwoofer

Kicker CVR124 12 Dual 4 ohm CompVR Series Car Subwoofer

Starting off our list, we’ve got the kicker CVR124. For the much that it packs under the hood, I’d say that this is equally as good a speaker for a first-time upgrade and for any audiophile as well. Being the CVR series, the Kicker CVR124 is engineered with the best quality construction as compared to other subs in its class.

The quality construction is then backed up with it’s top of the line performance.

The sensitivity:

This is basically one of the major features that sets apart the best from the worst. In a nutshell, the higher the sensitivity rating is, the better off you are when it comes to achieving high volumes without damaging the coil.

For the Kicker CVR124, you’ll be getting 86.9 decibels. This, I believe is high enough for you to achieve high volumes taking into consideration the power handling capabilities of the sub.

I have to say, however, that the sensitivity is one of the weak-points on the Kicker CVR124. This si so because it’s slightly below the 88dB sensitivity which is considered the best; so I’d say that the sensitivity on this sub is somewhat average.

Frequency response.

For this, I normally recommend that you always pay attention to the lower end of the scale. With the 25-500Hz that comes with the CVR124, you’ll be able to enjoy that window-rattling bass most people only dream about. The low 25Hz will basically take care of the lowest bass frequencies and the 500Hz will boost the low-mid notes which is basically what you get from a male voice or a guitar

Power handling.

This is probably what you should look into first when purchasing your subwoofer. You, first of all don’t want to buy a sub with too high a power rating that won’t be utilized by your current audio set up. Also, you don’t want to go for something that’s too low which makes it impossible for you to enjoy the bass.

The RMS and peak power output on the CVR124 is 400W and 800W respectively. Take it from an expert’s point of view, this is more than enough to get you going on the bass quality.

Dual 4 Ohm.

Something else that sets this sub apart is the Dual 4-ohm voice coil. This allows you to connect it in different set ups to allow it to channel as much power as possible for the best bass quality.

2. Kicker 10C124 Comp 12-Inch Subwoofer 4 SVC (Black)

Kicker 10C124 Comp 12-Inch Subwoofer 4 SVC

Yet another one from kicker, we’ve got the Kicker 10C124. Don’t let the 12-inch measurement lie to you, this sub has more to offer than you can imagine.

Let’s see what it packs under the hood, shall we?

Quality construction.

For a subwoofer to qualify as the best, the outside needs to be just as good as it’s inside. This is why the Kicker 10C124 has been designed with utmost precision from the basket to the voice coil on the inside.

Speaking of the basket, you’ll be getting a strong steel basket and on it, there’s a coil-cooling perimeter venting. This allows for optimal, if not maximum heat dissipation to ensure that the voice coil within it does not overheat no matter how high the power supplied to the sub is. In the long run, you get the subwoofer up and running for quite a long time.

For the coil wire, you’ll be getting a high-temp coil and the pole piece on it is vented. This simply increases the temperature threshold it would take before the coil gets damaged

The surround…

Besides the steel basket with a coil cooling perimeter, the Kicker 10C124 has got a ribbed surround. This is able to deliver maximum flexibility of the cone even at high excursion. Bu allowing the cone to move optimally, the bass quality is not compromised at all.

A super rigid, injection molded cone.

One of the determining facts of how good a bass will be is how good the cone is. Most preferably, it needs to be rigid and lightweight simultaneously which is what you’ll be getting from the Kicker 10C124. The same is backed up by a 360-degree back bracing hence keeping the bass smooth and loud all-day long.

The frequency response.

For this, you’ll be getting 27-500 Hz. This allows for the punchy and window-rattling bass without compromising the mids all the same.

Peak power & RMS.

Being 2 of the most important things, the peak and RMS re 300 watts and 50-150 watts respectively. Coupled up with the 88dB sensitivity, the power supply on this woofer will be enough to give you a clear and loud bass.

Also

For durability there’s a double Spiralead tinsel leads- a tough yellow double stitching on the surround that keeps the sub from falling apart. This gives it a long-lasting performance.

3. Kicker 10 CVT10 2-Ohm 10" CompVT Subwoofer - 10CVT102

Kicker 10 CVT10 2-Ohm 10 CompVT Subwoofer - 10CVT102

Yet another outstanding subwoofer from kicker is the Kicker 10 CVT10. Being a 10-inch subwoofer, it surely does have more to it than meets the eye. Here’s what you’ll be getting from the CVT10.

The subwoofer dimensions and weight.

Though it is something most of us happen to overlook, the physical appearance of a subwoofer is quite important. Starting with the mounting depth, which is also one of the most striking features about the CVT10, it’s only 4 ¼ inches and the mounting cutout is 9 3/16 inches

As said earlier, the mounting depth is probably the best thing about this subwoofer. It will easy to have it in place at tight fits such as the door panel which would not be the case when using most of the other subwoofers in the market. If you are seeking out the perfect aftermarket subwoofer then I think this would do the trick.

The subwoofer basically measures 12.2 x 12.2 x 6.5 inches which should not take up a lot of space. As for the weight, it’s only 10 pounds heavy.

Top of the line construction.

The cone

You really need a better bass? You should definitely consider paying attention to the cone. For the CVT10, you’ll be getting a stiff, injection-molded and modified-spoke cone. This is shaped to give the speaker maximum excursion from the slender basket that it’s got. This way, the sub gets the maximum possible flexibility for a better strength and durability without compromising the sound quality

The voice coil

It’s important that your subwoofer be supplied with an ideal amount of power in order to deliver a good bass. In order for this to be possible, the rule of thumb is that you only go for the best voice coil. The four-layer voice coil gives the CVT10 the capability to work with even large amounts of power being supplied to it without being damaged.

Strong steel basket.

Other than just protecting the subwoofer from damage, the steel basket has got a coil-cooling perimeter venting which aids in heat dissipation in the event of a high-power supply.

Power handling

The RMS and the peak power are two of the most important things. The peak and RMS are 800 watts and 400 watts respectively. As much as the sub is able to handle a high-power rating, I highly recommend that you observe the RMS to prevent the coil from being damaged.

Something else that’s worth pointing out

There is also a tough and double stitched surround which offers utmost flexibility. The subwoofer also does have special spring loaded binding posts for minimizing the depth impedance which in our case is an outstanding 4 ohms.

4. Kicker 43C104 Comp 10" 300 Watt SVC 4-ohm Car Audio Subwoofer

Kicker 43C104 Comp 10inc 300 Watt SVC 4-ohm Car Audio Subwoofer Woofer Sub C104

Meant for anyone who’s on a budget but wants to get a better pump on their bass, this 10” subwoofer has so much to offer you- from the construction to the power handling, everything has been done with utmost precision.

Let’s commence with the power handling threshold, shall we

The peak and RMS

Being two of the most important things, the peakis 300 watts whereas the RMS is 150 watts. Normally, as far as car speakers and subwoofers are concerned, the rule of thumb is that the peak is double the RMS which is the case for the 43C104.

As much as the peak threshold is quite high, it’s always important to play your music within the RMS range, if otherwise, the coil may easily be damaged. Speaking of the coil, how about we take a look at at it next?

High-temp voice coil.

The better the heat dissipation on the voice coil is, the better off you are since it’s power handling threshold is high. In our case, the high-temp voice coil makes it possible for the subwoofer to take in an optimal amount of power without the coil being damaged.

Injection-molded polypropylene cone.

the cone is what allows the cone to move which in turn sets the surround into motion. Despite there being quite a lot of materials that can be used for the cone, it is always important that it be as rigid and lightweight as possible.

An outstanding cone should not sacrifice rigidity for weight and vice versa which is why polypropylene was used for this subwoofer. Being both lightweight and rigid, it’s sensitivity is nor compromised and you get a louder and clearer bass in the long run.

Ribbed foam surround

From the cone, let’s move on to the foam surround. In order to deliver an ideal bass, the surround needs to observe two things- flexibility and surface area; basically, the more of these two, the better off you are.

Around the Kicker 43C104 is a ribbed foam surround. The fact that it’s ribbed gives it a larger surface area and owing to the fact that it’s made of foam, the flexibility is also outstanding.

I have to say, however that though foam is not the best as far as flexibility is concerned, it has the advantage of being more durable. In a nutshell, foam allows for optimal flexibility and will also maintain it’s original form for quite some time.

5. Kicker 12" 800 Watt CompVR 4 Ohm DVC Sub Woofer

Kicker 12inc 800 Watt CompVR 4 Ohm DVC Sub Woofer Car Power Subwoofer

Already halfway on our list and we’re doing goof so far. Coming up 5th on our list is another one from the Comp series of kicker subwoofers. These bad boys are renowned for giving you the biggest bargain for your buck.

The subwoofers in the Comp series come in a variety of sizes in order to accommodate different vehicles. For the one mentioned above, you’ll be getting a 12-inch configuration. What however is the most striking feature about this subwoofer is not it’s size, but rather the amount of power it packs.

That being said, let’s take a closer look at the subwoofer, shall we?

Then cone

As stated earlier on in this review, it’s important that the cone be as good as possible. It’s all about having the best sensitivity in relation to the subwoofer’s cone which is why it’s best that it be as rigid and lightweight as possible. One of the best materials that makes this possible is polypropylene which is what you’ll be getting on this subwoofer.

Power handling.

For the RMS, the range is between 50 and 400 watts. As long as you observe this, be sure to keep your subwoofer up and running for the longest time possible.

By being able to achieve a 400-watt RMS with 200 watts per coil, it also happens to be better than most, even those at a higher price range than it is. As a matter of fact, you’ll rarely have to achieve the peak to enjoy a loud and clear bass.

The peak on the other hand is 800 watts, clearlysomething you’ll hardly get from other subwoofers in its class.

The sensitivity

With a high-power rating, it’s important that the sensitivity be high enough. For this subwoofer, you’ll be getting 86.9dB. I have to say, this is slightly below the 88-dB that’s recommended for a good performing subwoofer but nonetheless, it’s bound to offer an average performance.

6. Kicker 43C124 12" 300W 4-Ohm COMP Series Car Audio Sub Subwoofer

Kicker 43C124 12inc 300W 4-Ohm COMP Series Car Audio Sub Subwoofer

Every subwoofer on this list is yet another reason as to why you should always give priority to the kicker subwoofers. Coming up 6th is one of the best subwoofers you’ll get from kicker and also in the whole car subwoofer market.

Let’s have a closer look at it, shall we?

The Comp series is renowned for giving the users possibly the biggest kick for their buck due to the qualities they possess and simultaneously going for an affordable price. Starting with the power handling, the peak and RMS are 300 watts and 150 watts respectively.

If you’re all about getting a loud and clear bass, then the RMS ought to take care of this. As much as power handling is critical when it comes to subwoofer selection, I have to say that it’s not the only thing you have to look into, which brings us to the next point- the impedance.

4-ohm impedance.

As already mentioned above, the impedance greatly contributes to the bass quality you get from your subwoofer.

The lower the impedance, the better of you are ad in this case, considering you’ll be getting 4 ohms, the amount of power your subwoofer will be utilizing will be more. This in turn makes it possible for you to enjoy a better bass.

The frequency response.

This is basically what determines the bass quality you’ll be getting. Whereas most people pay attention to the lower end of the range, which in our case is 27 hertz, it is also important that you see the maximum possible frequency the sub can operate at.

By being able to output a maximum of 500 hertz, it will be possible for you to enjoy both the mid-frequency bass as well as the low frequency bass. This, at the end of the day creates a better sound stage.

The sensitivity.

How the sensitivity works is quite simple- any subwoofer or speaker that has got anything as much as 88dB is rendered as the best. In our case, you get an outstanding 88.3 decibels for the sensitivity. This allows the subwoofers to play at a high volume without compromising the quality of the bass.

Verdict: Summing up, the Kicker 43C124 is definitely worth every dime as you can tell from it’s specs; but like any other audio component, proper maintenance is all it takes to keep it up and running for as long as possible.

7. Kicker 40CWR122 CompR Series 12 inch Subwoofer 2 Ohm

Kicker 40CWR122 CompR Series 12 inch Subwoofer 2 Ohm

Kicker subwoofers put to shame most of the other brands in most cases. The Kicker CompR series, on the other hand, are just on a whole new level.

Let’s have a closer look at the Kicker 40CWR122…

2-ohm impedance.

As per the title, it’s clear that the impedance rating on this sub is worth going for. As a matter of fact, it’s what makes the subwoofer stand out from the rest if not the best.

The lower the impedance the greater the amount of power it’s able to utilize which means that the bass will be deeper and clearer if not window-rattling. Speaking of power handling, let’s move on to our next point and see how good the 40CWR122 really is, shall we?

800-watt RMS and 1600 watts for the peak

Well, here’s something you don’t see every day. Truth be told, this subwoofer surely outdoes every other subwoofer in its class.

By having an 800-watt continuous power threshold, imagine what the subwoofer could if it got to surpass this and get to the peak. So as to ascertain you get to enjoy as much of this as possible, the 2-ohm impedance rating will be able to get as much power as possible to the subwoofer.

Product dimensions

Our 12-inch subwoofer measures 13.5 x 13.2 x 7 inches. You should pay attention to this before you decide on spending you cash on this subwoofer- it’s always good to know the level of complexity it may take to have the subwoofer in place.

Tip: you should measure both the inner and outer dimensions of where you intend to place the subwoofer which in most cases should be in the doors.

As for the weight, it comes at 11 pounds- quite heavy, right? Well, provided you have it in place, you’ll not have to worry about the weight at all.

8. Kicker 12 Inch CompC300 Watt RMS 4 Ohm Single Voice Coil Subwoofer

Kicker 12 Inch CompC 300 Watt RMS 4 Ohm Single Voice Coil Subwoofer

I’d recommend the kicker CompC series for anyone who’s looking for a subwoofer with durable construction and an outstanding performance all the same. If you’re all about this, then this might just be the perfect subwoofer for you.

The construction design and build quality.

The surround:

Even though it may not seem so, the surround highly contributes to how good a bass is. As a matter of fact, the best rated kicker subwoofers- with this one being one of them of course-don’t compromises on the surround build quality.

Around the cone is a ribbed polyurethane surround. The fact that it is ribbed increases it’s surface area for better distribution of sound waves and being made of polyurethane, it’s both flexible and durable

Injection-molded polypropylene cone.

Take it from an expert’s point of view- this alone is enough to give you a kick for your buck when you purchase this subwoofer.

Recommended due to it’s light weight nature and high rigidity rigidity, polypropylene just so happens to be one of the best cone materials you can get on a subwoofer. The high level of sensitivity it’s got makes it easier for the voice coil to move it accordingly.

Perimeter venting.

Yet another mind-blowing feature on this subwoofer is the perimeter venting. So as to ensure there is optimal heat dissipation, the subwoofer has got a perimeter venting that allows free flow of air around the motor structure. This way, your subwoofer gets to deliver a high-quality bass all the time.

A high temperature voice coil.

One of the most important things as far as subwoofer quality is concerned is a high-quality voice coil. Provided heat dissipation is optimal, then you undoubtedly have got nothing to worry about.

With the high temperature voice coil, this subwoofer will be able to work at a high-power rating without damaging the coil.

Power rating and impedance.

The RMS and peak voltages are 300 watts and 600 watts respectively. Definitely more than you need to get a loud and clear bass.

As for the impedance rating, the sub is incorporated with a 4-ohm voice coil which channels the maximum possible amount of power to ensure the bass is top-notch

27Hz-500Hz frequency response

The 27Hz will definitely be able to take care of the low frequency bass and as for the maximum 500Hz, this subwoofer will greatly cater for the mid-frequencies.

9. Kicker CVR104 (43CVR104) CompVR 10-Inch (25cm) Subwoofer

 Kicker CVR104 (43CVR104) CompVR 10-Inch (25cm) Subwoofer, Dual Voice Coil

Yet another outstanding subwoofer from kicker is the Kicker CVR104. If you’re all about getting the biggest kick for your buck, I’d highly recommend this subwoofer. The design is just as good as the performance and even so, it’s quite affordable as compared to other subwoofers with similar specs.

Here’s what you’ll be getting from it…

An injection-molded polypropylene cone.

We’ve already established that the cone, among other things, greatly contributes to the sound quality you get. The more sensitive it is, the better off you are. Sensitivity in this case simply means that the cone has to be both rigid and lightweight.

This allows it to be set into motion accordingly by the voice coil within it without compromising on the sound quality. By incorporating polypropylene in the Kicker CVR104, the low and mid-bass frequencies are just the best.

Dual 4-ohm voice coil.

The impedance of the voice coil determines how much power the subwoofer gets to convert to sound energy. The rule of thumb normally is the lower the impedance rating, the greater the amount of power that’s converted to sound by the coil.

Whereas 4 ohms and below is considered as being the best, the presence of the dual voice coil on the CVR104 just makes it one of the best kicker subwoofers. Depending on how you set it up, you can be able to channel even more power than a 4-ohm coil allows you to.

The peak and RMS ratings

Yet another thing that sets the line between the best and the substandard subwoofers is the power rating.

For the RMS, the CVR104allows you to get the bass going anywhere between 50 and 400 watts- it’s quite a sub, don’t you agree? As a matter of fact, you’ll hardly need to set the volume high enough to surpass this or get anywhere close to the 800-watt peak voltage.

The RMS is 200 watts per voice coil. With the 4-ohm coil, you’ll be able to get as much power as possible for a loud, clear and booming bass.

The sensitivity.

Everything’s got a weak point. No matter how good a subwoofer is, there’s always that one thing that drags it back and for this one, I’d like to think it’s the sensitivity.

As much as 83.6dB is not annoyingly low, and will hardly lower the bass quality, getting a higher sensitivity would be better. On the bright side, this is compensated for by the RMS and the dual voice coil; so yes, it’s still worth every penny.

10. Kicker 700 Watt 10 Inch CompVR 2 Ohm Subwoofer Car Bass Power Sub

 Kicker 700 Watt 10 Inch CompVR 2 Ohm Subwoofer Car Bass Power Sub

Coming to an end of our best kicker subwoofers review, we’ve got the Kicker 43CVR102yet again from the CompVR series.

Here’s what it packs under the hood…

A 2-ohm dual voice coil. 

This is possibly the most striking thing about the 43CVR102. As far as getting the most out of your subwoofer is concerned, this surely does play a huge part in giving you the best bass.

With an impedance as low as 2-ohms, the subwoofer gets to channel as much power as possible which is then converted to sound.

The fact that it’s a dual voice coil makes it possible to wire up the subwoofer in different ways as per your preference.

The power handling.

Besides the voice coil, it’s important that the power rating be optimal in relation to the coil. For the 43CVR102, you get to have an outstanding 400-watt RMS and a peak that’s double this- an outstanding 800-watts.

With such a power rating, you simply have the pleasure of being one of the few people with a window-rattling bass.

A ribbed Santoprene surround and a SoloKon cone

For utmost flexibility, the surround is made out of santoprene which makes it possible for the cone to move it with utmost ease. As a matter of fact, santoprene is far much better to use for the surround as compared to most other materials.

Final Verdict.

It’s now time to come to an end of our review of the best kicker subwoofers. One thing that always holds is paying attention to detail.

We’ve narrowed down your options to 10 of the best subwoofers from the best brand as far as car audio is concerned. From the review above, there’s everything for everyone and more so, each subwoofer is affordable and doesn’t compromise on the sound quality.

With everything you need to give your car the bass it deserves, all you’ve got to do now is simply choose whichever suits you best and you’re good to go.

Best 10 inch Subwoofer – Choose from our Top 15 Products

Just as it is the case when you want to get an upgrade for your other stereo components on your car, having the best 10 inch subwoofer install demands that you take a lot into account.

What if I told you that I could show you exactly how to get what you want?

In this section, I would like to let you in on a little secret of mine and shed some light on the only key things you should take into account when choosing one. Whether you want the loudest sound or the most accurate sound quality, there’ll be something for you. Whether space, among other things, is a concern, you’ll know what to go for in a short while.

In this section, we’ll first be looking at the buying guide from which you will be able to know what to go for and what to avoid and then move on to the product reviews.

Well, sit back and relax, because I’m bringing in the noise…

Choose from any of our 3 Recommended Best 10 inch subwoofer

Don’t want to go through the hassle of reading all through, have a quick look at our recommended picks.

Product Image

Key Features

Planet Audio AC8D 1200 Watt
  • check
    Sensitivity SPL (1W / 1m) 85 dB
  • check
    Resonant Frequency 39 Hz
  • check
    Polypropylene Cone
  • check
    2 Inch Aluminum Voice Coil
  • check
    Foam Surround


Planet Audio AC10D 1500 Watt
  • check
    Sensitivity SPL (1W / 1m) 87 dB
  • check
    Resonant Frequency 39 Hz
  • check
    37 Hz Port Frequency
  • check
    4.75 Inch Mounting Height
  • check
    9.13 Inch Mounting Hole Diameter
Rockford Fosgate R2D4-10 Prime R2 DVC
  • check
    2 Inch Copper Clad Aluminum Voice Coil
  • check
    250 Watts RMS
  • check
    500 Watts Peak Power Rating
  • check
    10-inch, dual 4-ohm subwoofer
  • check
    Mica injected polypropylene cone

best 10 inch subwoofer : Ultimate Buying Guide

Best 10-inch Subwoofer -Buying Guide-

First of all, you should know that subwoofers are similar to speakers and the only difference is that they are dedicated to only giving us low frequencies. Regardless of the type of music you like, having a quality subwoofer will be able to increase the overall listening experience of your stereo system.

The enclosure types

As far as subs are concerned, one of the most important things just so happens to be the type of enclosure you have around them. Normally, it is referred to as a box which is exactly what it is. What varies, however, are the different types of enclosures you will get in the market.

Well, let’s shed some light on 3 of the main ones.

The sealed enclosures

We’ve all got our different tastes in music and if you’d like that deep bass, then you should go for the sealed enclosures. In some instances, having a smaller sub in a sealed enclosure will give you a deeper bass as compared to the large subs in open enclosures. Think of the sealed enclosures as the type of enclosure that delivers a tight and accurate bass that.

You are able to get a crispy and accurate bass from a sealed enclosure since the sealed air in the sealed enclosure acts like a shock absorber hence the forward and backward motion of the sub is modulated. The end result of this modulation is having all the notes being produced evenly.

The ported

If you’d like a decent bass quality but aren’t too much into the deep bass, then getting the ported enclosure is the best way to go.

What you get from these subs is a louder than average sound. When it comes to the ported enclosures, the boomy bass has got more punch as well as reverberance in each of its beats. The best part about this sound is that you attain it without using any processor or equalizer.

This is what’s behind the sound…

With the port on the sub, the cone gets to have a greater freedom of motion. What the port simply does is redirect sound from behind the cone and then adds it up to the sound that’s coming from the front of the cone hence making the bass louder.

This simply increases efficiency and will let you use a smaller amplifier as compared to that you’d use if the same set up was a sealed box.

Another added advantage you get from a ported box over a sealed one is that the airflow keeps the sub cool at all times hence it lasts longer

What about power, impedance, frequency, and sensitivity?

If you have in mind the type of sound you’d like to listen to, here are some other major considerations that should not be overlooked whatsoever.

The power handling.

One thing that’s for sure is that for anyone who wants a system that delivers a really nice boom, the only way to go is ensuring that it gets the right amount of power.

One mistake that most people do is paying attention to the peak rating rather than the RMS rating. The reason as to why the RMS is more important than the peak is that the RMS is a measure of the continuous power handling of the subs.

Ensure that you match the subs to the RMS and not the peak. Doing otherwise will simply result in you getting a distorted sound or even worse, damaging the subs completely.

The sensitivity levels.

Sensitivity is inversely proportional to the power. A sub with a high sensitivity needs less power to offer similar sound to a sub with low sensitivity and a higher power supply.

What about the frequency range?

This simply gives you some knowledge of the range of which the subwoofer can be able to play most effectively. When it comes to the frequency range, no matter how large it is, you should always pay attention to the low end of the scale rather than the high end.

Something else you should take into consideration when it comes to frequency is the type of enclosure within which the subwoofer is.

The impedance rating.

So as to get the optimal performance from your sub, you should also consider matching the impedance. Impedance is expressed in ohms and refers to the electrical resistance of the sub. Depending on how the subwoofer is wired, the complexity of the impedance rating varies.

best 10 inch subwoofer Only Choose from 15 of our Best picks of 2018

Best 10-inch Subwoofer Only Choose from 15 of our Best picks

Having had a look at the key things to take into account before you make your selection, let’s now have a look at 15 of the best.

1. Planet Audio AC8D 1200 Watt, 8 Inch, Dual 4 Ohm Voice Coil Car Subwoofer

Planet-Audio-AC8D-1200-Watt

Starting us off on our list is the Planet Audio AC8D. As far as getting yourself a budget sub with decent qualities, this might just be one of the best you could get in the market.

Let’s see what it packs under the hood…

The design- to give you an awesome sound quality and at the same time deliver a comfortable and loud enough bass quality, the woofer comes with a polypropene cone. For the surround, it boasts a foam surround which gives it enough room for movement and is durable as well.

As for the sensitivity and frequency, the Planet Audio AC8D has got an 85dB sensitivity which delivers a loud sound at low power. As for the resonant frequency, it comes with 39 Hz which delivers a variety of tunes at high quality.

Power handling: with a 600W RMS, it surely will deliver loud and quality sound with zero distortions. The 1200W peak voltage, on the other hand, gives room for momentary defiance of the RMS power.

Pros

  • check
    With the 600W RMS power handling, the sub delivers a loud and decent sound quality without any distortions.
  • check
    The polypropene cone is both durable and conveniently delivers a decent bass
  • check
    The sensitivity gives a good quality sound at a low power rating.

Cons

  • Observe the power rating, otherwise, they may give in easily.

Frequently asked questions

Q: how many RMS watts doe sit handle?

A: it handles 600W RMS

Q: does it come with one or 2 speakers?

A: Unless specified, it comes with 2

Q: What size are the terminals? What wire size can I use?

A: these are the old school solder terminals hence the wire is your choice.

2. Planet Audio AC10D 1500 Watt, 10 Inch, Dual 4 Ohm Voice Coil Car Subwoofer

Planet-Audio-AC10D-1500-Watt

Above all else, the most important thing when it comes to selecting a subwoofer is the nature of the sound it delivers. Taking this into account, we present to you the Planet Audio AC10D.

Starting with the power handling, this 10 inch sub can handle a maximum of 1500W. This gives momentary allowances for exceeding the recommended RMS power rating. Speaking of the RMS, It is an outstanding 750W- with this, you’ll play quite a number of tunes comfortably and at a high volume.

For durability and the delivery of the best sound, the cone is polypropene which means that you also get to have one of the best bass qualities you could get from a budget subwoofer.

The foam surround on the other hand functions to not only functions to give the sub enough room for movement but it is also durable enough to ensure that you get the best quality sound for long.

Pros

  • check
    Poly injection cone- delivers a decent sound quality and an awesome bass.
  • check
    The 87dB sensitivity gives a loud and comfortable sound even at low power.
  • check
    Works effectively both in a sealed and ported enclosure.

Cons

  • Don’t play too close to the RMS or it may give in.

Frequently asked questions

Q: would a 1200W amp handle it?

A: Yes, just turn the amp up all the way since the RMS is 750 watts.

Q: does it come in a pair?

A: Yes, it does

Q: does it have dual voice coil?

A: yes, it does.

3. Rockford Fosgate R2D4-10 Prime R2 DVC

Rockford-Fosgate-R2D4-10-Prime-R2-DVC-4-Ohm

All things considered, there’s nothing as awesome as getting the best upgrade for your current car stereo system. that being said, let’s take a look at what the Rockford Fosgate has in store for us.

If you are on a budget and are all about performance, this might just be what you’re looking for. Starting with the cone, it boasts a mica injected polypropylene cone. Which is able to give both a sensitive yet at the same time stiff woofer cone.

As for the surround, it’s poly-foam. Though some prefer rubber, foam is more flexible hence its performance is twice as good.

The power rating, on the other hand, is ideal for delivering the best sound regardless of the music genre you’ll be listening to. With 250 watts RMS and 500 watts of peak voltage, you’ve definitely got more than enough power to play whichever tunes you like and at a comfortable volume level.

As for the cone, it is the Kevlar fiber reinforced paper cone. In its class, this just so happens to be the best cone construction since it is strong, lightweight and rigid.

Pros

  • check
    Mica injected polypropene cone for utmost durability and a decent audio output.
  • check
    The power rating allows you to play different tunes and at a high volume without the sub giving in to damage.
  • check
    For added durability, the cone is Kevlar fiber reinforced.

Cons

  • Always observe the power rating, otherwise, they may heat up and get damaged.

Frequently asked questions

Q: is an 800-watt amp okay with these?

A: yes, they’ll work quite well.

Q: I have a 1600-watt amp, can 3 of these subs handle it?

A: yes, this combination will be effective.

Q: what is the recommended box space for one of these subs?

A: Based on the manufacturer, the recommended space is 0.59 cubic feet

4. BOSS Audio CXX10 800 Watt, 10 Inch, Single 4 Ohm Voice Coil Car Subwoofer

BOSS-Audio-CXX10-800-Watt,-10-Inch,-Single-4-Ohm-Voice-Coil-Car-Subwoofer

Truth be told, getting the best 10 inch subwoofer is one of the biggest steps you can take to upgrade your car’s stereo system. What’s even more interesting is that the BOSS Audio CXX10 might just be able to give you what you exactly need.

Let’s have a look at what it’s got for us…

Starting with the sensitivity and resonance, the BOSS Audio CXX10 boasts a sensitivity of 87dB. Though most people don’t pay attention to the sensitivity levels, this one will allow you to go loud and at a small amount of power. As for the resonance frequency, it’s got an outstanding 36Hz which can be able to deliver an awesome bass and treble as well.

As for the design, it comes with a polypropene cone. As it turns out, this is just about one of the best you could get in this price range since it is both durable and sensitive.

The surround, on the other hand, is rubber, though not the most flexible, it’s flexible enough and in addition to this, you won’t have to be worried about the high summer temperatures. It is tolerant to extreme temperatures and moisture.

Pros

  • check
    The 400W RMS is enough to go loud without damaging the subs.
  • check
    The rubber surround is durable and flexible as well.
  • check
    The polyurethane cone allows for a great sound and is durable as well.

Cons

  • Keep the RMS lower than the recommended, otherwise, you may damage it.

Frequently asked questions

Q: how many speakers do I get out of the box?

A: one

Q: what is the frequency rating?

A: 20Hz to 200Hz

Q: what gauge wire does this sub accept?

A: the 14-gauge wire.

5. JBL CS1014 10″ Subwoofer

JBL-CS1014-10inch-Subwoofer

If you want a budget subwoofer that will not disappoint when it comes to delivering a quality sound output, then the JBL CS1014 is definitely it. let’s see what it’s got for us.

The power rating: as it turns out, the power rating is one of the most important aspects that shouldn’t be overlooked when it comes to selecting a sub. In this case, you get 125W of RMS and 500W of peak power both of which allow you to listen to your favorite tunes without damaging the subs.

As for the cone, it comes with a polypropene cone which happens to be one of the best for durability, sensitivity and delivering an awesome sound quality with the best bass.

The surround, on the other hand, is rubber- not only is it durable but it also allows enough room for the sub’s movement.

Pros

  • check
    The 125W RMS is enough to go loud without damaging the sub.
  • check
    With a rubber surround, you get utmost durability and flexibility as well.
  • check
    Considering the cone is polypropene, there’s high sensitivity for the best sound quality.

Cons

  • The RMS may not be enough for you.

Frequently asked questions

Q: does it come with the tube or is it the speaker alone?

A: It’s just the speaker

Q: can it be used in an under-seat box?

A: yes, it can be used in an under-seat box

Q: can it fit in a shallow mounting box?

A: yes, it’s exactly what it was meant to do

6. Pioneer TSW261D4 10-Inch Champion/DUAL4 OHM/1200W/40 Equalizer

Pioneer-TSW261D4-10-Inch-Champion

Willing to spend a little bit more on your stereo system? then you should definitely consider checking out the Pioneer TSW261D4.

Starting with the power rating, it has got an RMS of 350W and a peak power of an outstanding 1200W. with such, you surely will not be disappointed; irrespective of which music genre you will be listening to, they’ll hardly give in.

The design:

As for the construction, the Pioneer TSW261D4 has got an IMPP composite cone surround which. As compared to the normal polypropylene cones, the IMPP cone is stiffer and less colored by resonation. You get to have added durability and performance.

The surround, on the other hand, is the reinforced elastic polymer type. As it turns out, besides having the best elasticity, it is also one of the most durable you could get in its class.

Pros

  • check
    An outstanding power handling for the best sound quality.
  • check
    IMPP composite cone is durable and sensitive for the best sound.
  • check
    The surround is Dual Layer Fiber Reinforced Elastic Polymer-flexible and durable

Cons

  • Hooking them up may be a problem if you’re doing it for the first time

Frequently asked questions

Q: what is the air space needed?

A:Sealed box .65-1.25 cubic feet should work best

Q:What Is the mounting depth for the speaker?

A: 5.5 inches should do.

Q: what is the RMS?

A: 350 watts.

7. Boss CH10DVC 10″ 3000W Car Subwoofers

Boss-CH10DVC-10in-3000W-Car-Subwoofers-Audio

With everything in your car already set, it would be completely fair to do it some justice and boost the stereo system. if you’re going to do this with a sub, then consider trying out the Boss CH10DVC.

You’ll be getting them as a pair out of the box. The RMS you get from each one is 750 watts and 1500 watts per pair. Anyone who knows anything about stereo systems will verify that this is more than enough when it comes to delivering the best sound quality including the bass.

As for the peak, it’s an outstanding 1500 watts for each and 3000 for the pair. You can stretch it past its RMS momentarily for the best music experience.

The surround just so happens to be one of the best. With the butyl rubber, not only will it be tolerant to both extreme temperatures and moisture but it’s also got the best flexibility.

To deliver an awesome sound quality, the cone is polypropylene. Besides being durable, it is highly sensitive to ensure that you get the best possible sound quality and most of all, the bass is quite punchy.

Pros

  • check
    Polypropylene cone for utmost durability and the best sound quality.
  • check
    Outstanding power handling- 750W RMS and 1500W RMS for each sub.
  • check
    With the butyl rubber surround, the flexibility and durability is not compromised.

Cons

  • Exceeding the recommended RMS would easily damage the subs.

Frequently asked questions

Q: Can they handle 2 ohms?

A: No, they can’t

Q: Do I get 2 subs out of the box?

A:yes, the subs are 2 out of the box.

Q: why are there 2 places for the speaker wire?

A: this is because it is a dual voice coil.

8. Kicker 43C104 Comp Car Audio Subwoofer

Kicker-43C104-Comp-Car-Audio-Subwoofer

As far as getting the best 10 inch subwoofer is concerned, there’s definitely more than meets the eye and quite a number of things you should take into account before making your selection. That being said, let’s see what the Kicker 43C104 packs under the hood.

Starting with the power handling and also one of the most important things on a sub, the Kicker 43C104 has got an RMS of 150 watts and a peak power of 300 watts. As it turns out, this will come in handy quite well since not only will the RMS allow you to comfortably listen to your music at an ideal quality but the Peak permits momentary surpassing of the RMS for an even better experience.

As for sensitivity, it comes with 86.2 dB which just so happens to be the best considering the power rating of the subs.

As for the frequency response, the 30-500Hz range is just the best you could get from a subwoofer in its class since with this, you’ll be able to have an awesome bass and treble among other tunes. In addition to this, the mids, highs, and lows will also be quite good.

Pros

  • check
    2dB turns out to be an ideal sensitivity in delivering good sound quality.
  • check
    The power handling is enough to allow an awesome sound with no distortions.
  • check
    The frequency range allows the delivery of the best bass and treble as well.

Cons

  • Always pay attention to the RMS; exceeding it will damage the sub or distort the sound.

Frequently asked questions

Q: Is it okay to use a 1.3 cubic feet ported box?

A: yes, this is totally okay

Q: is it okay for me to use a 1000w amp or will it overpower the sub?

A: yes, the 1000w amp is okay to use.

Q: What is the RMS rating?

A: the RMS is 150 watts and the peak is 300 watts.

9. Powerbass S-1004 10-Inch Single 4 Ohm Subwoofer 550W Max

Powerbass-S-1004-10-Inch-Single-4-Ohm-Subwoofer-550W-Max

We’re already past halfway on our top 15 list. coming 9th on our list is the Powerbass S-1004. If you’re looking for the best mid-range upgrade for your stereo system, then this might definitely just be it.

Starting with the design, it comes with an oversized motor structure that has got a high-intensity ferrite magnet so as to give you an added advantage when it comes to power handling.

As for the foam, it boasts the large roll foam surrounds. As it turns out, these are one of the best since they allow for a free movement of the cone which is an equivalent of a loud bass- definitely guaranteed to give you an outstanding experience as compared to others in its class.

As for the cone, it’s got the 4-layer Black Paper/Wool cone. This provides a smooth and natural bass reproduction for the best music experience.

Pros

  • check
    High-intensity ferrite magnet for the best power handling.
  • check
    Large roll surround foams for free cone movement and a loud bass.
  • check
    4-layer Black Paper/Wool cone for smooth bass reproduction.

Cons

  • Seems to be more inclined towards delivering an awesome bass.

Frequently asked questions

Q: Are they louder than the kicker comps 12s?

A: yes, they are.

Q:Are they big enough to put in a dual ported box?

A:  yes, they are.

Q: what is the best amp to run 2 of these?

A: a 1000-watt mono block amp would do.

10. Polk Audio db1040DVC 10-Inch Dual Voice Coil Subwoofer

Polk-Audio-db1040DVC-10-Inch-Dual-Voice-Coil-Subwoofer

If you’re all about durability and performance, then the Polk Audio db1040DVC is definitely what you should go for.

Starting with what makes it stand out of the crowd, it is marine certified which means that its performance will not be flawed irrespective of how harsh the conditions it is being used in are.

To ensure that you use it without it getting damaged or experiencing any sound distortions, the Polk Audio db1040DVC has got an outstanding 270 watts for the RMS and 540 watts for the peak power. Most importantly, provided you observe the RMS rating, it will deliver the best sound.

When it comes to the cone. It’s equipped with a 10-inch black Dynamic Balance polymer composite cone. Besides being highly sensitive for the best bass, it is also quite durable.

Designed for use in the sealed, ported and the band pass enclosures- you surely do deserve the biggest bang for your money.

Pros

  • check
    270 watts RMS and 540 watts peak power for continuously enjoyable music experience.
  • check
    Marine certified hence durability is not compromised.
  • check
    The polypropylene cone with rigid ABS dust cap gives a stiffer cone for better mechanical stability.

Cons

  • Despite the durability, the bass is a little wanting

Frequently asked questions

Q: what is the mounting depth?

A: you’ll need about 7 to 7 ½ inches

Q: does It come with the grille?

A: no, you need to get the grille separately

Q: Can this be used in a marine open-air application?

A: yes, it can, it is a marine grade sub

11. Alpine SWS10D4 / SWS-10D4 / SWS-10D4 Type-S 10 Car Subwoofer

Alpine-SWS10D4-SWS-10D4-Type-S-Subwoofer

If you’d like to go a notch higher and give your car its deserved high-end stereo system upgrade, then you should consider having a look at these Alpine subwoofers.

Here’s what you get out of the box…

Power handling: to ensure that you get to listen to your favorite music genres without any sound distortions or damaging the subwoofers at all, you get an outstanding 500W RMS power output and in addition to this, there is a 1,500W of peak power as well.

To give you multiple connection options, the sub comes with dual 4-ohm voice coils that are built like Type-R. these are massive and have got a high strength steel frame.

So as to give you the best bass quality, they come with the high-grade Strontium Ferrite Magnets which are reputed for delivering more bass in less space.

So as to keep things cool, you have the patented Alpine Airflow Management System.

Pros

  • check
    High-grade strontium ferrite magnets to deliver more bass in less space.
  • check
    The HAMRS Santoprene rubber surround makes this the best 10 inch subwoofer when it comes to flexibility and durability.
  • check
    The design allows it to keep cool for the best performance.

Cons

  • At certain notes the sound is really high pitched which may be uncomfortable to some.

Frequently asked questions

Q: can it be converted to 2-ohm impedance?

A: Yes, there are 4 connections in it to bridge them.

Q: what is the best amp for this sub?

A:alpine 350 should do but it depends on how many subs you are running. This works on one or two subs.

Q: Would an 8 or 4-gauge wiring be best for this sub matched with the mrv 500?

A: 4-gauge wire should do.

12. Pair of KICKER 10C104 Comp 10″ 600 Watt 4 Ohm Car Subwoofers

Pair-of-KICKER-10C104-Comp-10

As far as getting an upgrade is concerned, then this pair from KICKER may just be the best 10 inch subwoofer you could get the biggest bang for your money. Well, let’s see what it packs under the hood.

The design:

As far as design quality goes, the one you get from these just so happen to have the best. First of all, to keep it as cool as possible, it has got a strong steel basket with a coil-cooling perimeter venting. This means that you won’t have to worry about overheating.

The super-rigid and injection molded cone with a 360-degree back bracing deliver the best sound quality. The vented pole piece on the other hand functions to dissipate heat when need be.

As for the surround, it is ribbed so as to deliver utmost strength at a high excursion.

The best thing about the subs is that the comp is designed in such a way that it will be able to perform best in both sealed and open enclosures.

Pros

  • check
    Ribbed surround so as to give ultimate strength at high excursion.
  • check
    The strong steel basket is durable and also has coil-cooling perimeter venting.
  • check
    To facilitate heat dissipation, the pole piece is vented

Cons

  • It’s a pair of 300W not 600W as advertised

Frequently asked questions

Q: does it come with a warranty?

A: No, it does not come with a warranty.

Q: how does it compare with 12-inch comps?

A: the 12s are louder but the 10s hit harder.

Q: how many watts does it receive?

A: 600W for both and 300W max for each

13. Kicker CVR104 (43CVR104) CompVR 10-Inch (25cm) Subwoofer

Kicker-CVR104-(43CVR104)-CompVR-10-Inch-(25cm)-Subwoofer

We’re nearly done with our list now. Coming 13th, we’ve got the Kicker CVR104 (43CVR104) CompVR.

Truth be told, this one will definitely be worth every dime you spend on it. starting with the power handling, it can handle between 50 and 400 watts RMS, more so, each coil will be able to handle as much as 200 watts. The peak power handling, on the other hand, is an outstanding 800 watts. Get the boom you desire without any damages or sound distortions!

To give you an even better sound, the RMS is backed up with an outstanding sensitivity of 83.6 decibels. This simply means that you won’t be needing a high-power rating so that you can listen loudly and comfortable- definitely the best 10 inch subwoofer.

As for the cone, it is the injection-molded polypropylene. When it comes to durability and sensitivity, this just so happens to be one of the best you could get for your money.

Pros

  • check
    6 dB sensitivity gives a loud and clear sound even at low power.
  • check
    With the injection-molded polypropylene cone, you get both durability and an awesome sound quality.
  • check
    The power handling renders them ideal for listening to different music genres comfortably without the subs giving in to damage.

Cons

  • Though they are accurate, they aren’t very loud

Frequently asked questions

Q: What is the RMS rating?

A: 350W RMS

Q: Can this be able to fit on my 10 bazooka tube?

A: yes, and it is a great subwoofer

Q: what amps are recommended for running two of these?

A: audio pipe 1000 watts.

14. New ROCKFORD FOSGATE R2D2-10

New ROCKFORD FOSGATE R2D2-10 1000W

As far as far as getting the best 10 inch subwoofer Is concerned, the New ROCKFORD FOSGATE R2D2-10 might just be what you’re after.

First of all, it is worth mentioning that it has got a Stamp-Cast basket with a spider venting. Not only is this durable, but it also ensures that there is ultimate air circulation hence you won’t have to worry about damage by heat whatsoever.

The cone, on the other hand, is the Mica-injected polypropylene cone. With the addition of the mineral Mica to polypropylene, the durability is made even better and the best part about this is that the sound quality is not compromised whatsoever.

Owing to the fact that it is a dual voice coil sub, you have got multiple installation options which means you can set it up to produce just the quality of sound and volume you desire.

Outstanding power handling:

The RMS of the setup is 250 watts for each of the subs and 500 for the combined pair. As for the peak power handling, it is 500 watts for each sub and 1000 watts for the combined pair.

Pros

  • check
    Dual voice coil for installation flexibility.
  • check
    Mia-injected polypropylene cone to deliver quality sound and maintain utmost durability.
  • check
    The power handling allows you to listen to your favorite music without any sound distortions

Cons

  • Surpassing the RMS will damage the subs. If you want a louder performance, consider using an amplifier.

Frequently asked questions

Q: what is the mounting depth?

A: this is slightly over 5 inches

Q: how should I connect it?

A: either parallel or series regarding your preferred set up

Q: is the price for both the subs?

A: yes, it is for the pair.

15. PLANET AUDIO AC10D 10″ 6000W Power Car Audio Subwoofers

PLANET-AUDIO-Audio-Subwoofers-Woofers

Coming finally on our best 10 inch subwoofer list is the PLANET AUDIO AC10D. well, let’s see what it packs under the hood.

If you’re willing to spend so as to do your stereo system some justice, then this subwoofer will not disappoint you whatsoever. starting with the power handling, each of the 2 subwoofers has got as much as 750W RMS. Put all together, you get 3000W RMS in total. The peak on the other hand for each of the 4 is 1500W which gives you a total of 6000W if the 4 are all put together.

Considering it is a dual 4-ohm voice coil, you’ve got a variety of installation options so as to get just the right sound quality as per your preference.

The efficiency is 1 watt/1 meter and at a 96dB sensitivity. Taking this into account, you’ll be able to get an awesome sound quality even with a low power rating.

Pros

  • check
    Dual 4-ohm voice coil for multiple installation options
  • check
    1 watt/1-meter efficiency at 96dB hence the sound quality is definitely the best.
  • check
    An outstanding RMS and peak power handling for the best performance.

Cons

  • Not efficient for use in a shallow box.

Frequently asked questions

Q: is the price for all the four?

A: Yes, it’s for all the 4

Q: what box should I buy for the subs?

A: 2 vented boxes should work fine

Q:Can I use a 5,000-watt amp?

A: it is recommended that you use the planet audio anarchy so yes you can only if you’re using a true 5000. Just ensure you tune it down a bit.

Check the 15 best 10 inch subwoofer at a glance

Product Image

Key Features

Planet Audio AC8D 1200 Watt
  • check
    Sensitivity SPL (1W / 1m) 85 dB
  • check
    Resonant Frequency 39 Hz
  • check
    Polypropylene Cone
  • check
    2 Inch Aluminum Voice Coil


Planet Audio AC10D 1500 Watt
  • check
    Sensitivity SPL (1W / 1m) 87 dB
  • check
    Resonant Frequency 39 Hz
  • check
    37 Hz Port Frequency
  • check
    4.75 Inch Mounting Height
Rockford Fosgate R2D4-10 Prime R2 DVC
  • check
    250 Watts RMS
  • check
    500 Watts Peak Power Rating
  • check
    10-inch, dual 4-ohm subwoofer
  • check
    Mica injected polypropylene cone
BOSS Audio CXX10 800 Watt
  • check
    Sensitivity SPL (1W / 1m) 87 dB
  • check
    Resonant Frequency 36 Hz
  • check
    2.5 Inch Copper Voice Coil
  • check
    4.6 Inch Mounting Height
JBL CS1014 10inch Subwoofer
  • check
    500 Watt Max
  • check
    125 Watt RMS
  • check
    Polypropylene Cone
  • check
    Rubber Surround
Pioneer TSW261D4 10-Inch Champion
  • check
    Max. Music Power 1,200W
  • check
    Cone Composition IMPP
  • check
    Surround Composition Dual Layer Fiber
  • check
    Reinforced Elastic Polymer Surround
Boss CH10DVC 10 3000W Car Subwoofers Audio
  • check
    Rated at 1500 Max per each
  • check
    Features a polypropylene cone
  • check
    Butyl rubber surround
  • check
    4 Ohm impedance
Kicker 43C104 Comp Car Audio Subwoofer
  • check
    300W Peak Amp Power
  • check
    Injection-molded Polypropylene Cone
  • check
    Ribbed Foam Surround
  • check
    High-temp Voice Coil
Powerbass S-1004 10-Inch Single 4 Ohm Subwoofer 550W Max
  • check
    275 RMS/550 watts Max
  • check
    2-Inch BASV voice coil
  • check
    Chrome push input terminals
  • check
    4 layer paper/wool cone
Polk Audio db1040DVC 10-Inch Dual Voice Coil Subwoofer
  • check
    Dual voice coil subwoofer
  • check
    Frequency response: 20-200 Hz
  • check
    270 watts continuous
  • check
    Marine certified
Alpine-SWS10D4-SWS-10D4-Type-S-Subwoofer
  • check
    Peak Power Output: 1,500 watts.
  • check
    RMS Power Output: 500 Watts
  • check
    Dual 4-Ohm Voice Coils
  • check
    8 AWG Push Terminals
New KICKER 10C104 Comp 10
  • check
    Super-rigid, injection-molded cone
  • check
    Durable Spiralead tinsel leads
  • check
    360-degree back bracing
  • check
    Yellow double-stitching on surround
Kicker CVR104 (43CVR104) CompVR 10-Inch (25cm) Subwoofer
  • check
    Injection-molded Polypropylene Cone
  • check
    Power Handling: 50-400 Watts
  • check
    800 Watts Peak Power Handling
  • check
    Sensitivity: 83.6 DB
New ROCKFORD FOSGATE R2D2-10 1000W
  • check
    Max Power: 500 Watts
  • check
    RMS Power: 250 Watts
  • check
    Quantity: 2 Subwoofers Total
  • check
    Size: 10"
PLANET AUDIO AC10D 10″ 6000W Power Car Audio Subwoofers
  • check
    MAX Power Handling: 1500 Watts
  • check
    RMS Power Handling: 750 Watts
  • check
    Frequency Response: 23Hz - 3kHz
  • check
    Efficiency (1 Watt/1 Meter): 96 dB

Final Verdict.

Truth be told, there’s more to choosing a sub than meets the eye. Unlike what most people tend to think or assume, it is neither about the brand name nor is it about how much the sub costs. What you should consider however is whether or not the sub will deliver the sound quality you like.

With the knowledge of how to choose the best in mind and 15 of the best simply a click away, I’ve done my part and it’s now up to you to do yours. Simply take your time to know what you really want then go ahead and make your selection- you deserve the best.